cregit-Linux how code gets into the kernel

Release 4.10 arch/powerpc/oprofile/common.c

/*
 * PPC 64 oprofile support:
 * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
 * PPC 32 oprofile support: (based on PPC 64 support)
 * Copyright (C) Freescale Semiconductor, Inc 2004
 *      Author: Andy Fleming
 *
 * Based on alpha version.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

#include <linux/oprofile.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/errno.h>
#include <asm/ptrace.h>
#include <asm/pmc.h>
#include <asm/cputable.h>
#include <asm/oprofile_impl.h>
#include <asm/firmware.h>


static struct op_powerpc_model *model;


static struct op_counter_config ctr[OP_MAX_COUNTER];

static struct op_system_config sys;


static int op_per_cpu_rc;


static void op_handle_interrupt(struct pt_regs *regs) { model->handle_interrupt(regs, ctr); }

Contributors

PersonTokensPropCommitsCommitProp
andrew mortonandrew morton20100.00%1100.00%
Total20100.00%1100.00%


static void op_powerpc_cpu_setup(void *dummy) { int ret; ret = model->cpu_setup(ctr); if (ret != 0) op_per_cpu_rc = ret; }

Contributors

PersonTokensPropCommitsCommitProp
andy flemingandy fleming1753.12%150.00%
bob nelsonbob nelson1546.88%150.00%
Total32100.00%2100.00%


static int op_powerpc_setup(void) { int err; op_per_cpu_rc = 0; /* Grab the hardware */ err = reserve_pmc_hardware(op_handle_interrupt); if (err) return err; /* Pre-compute the values to stuff in the hardware registers. */ op_per_cpu_rc = model->reg_setup(ctr, &sys, model->num_counters); if (op_per_cpu_rc) goto out; /* Configure the registers on all cpus. If an error occurs on one * of the cpus, op_per_cpu_rc will be set to the error */ on_each_cpu(op_powerpc_cpu_setup, NULL, 1); out: if (op_per_cpu_rc) { /* error on setup release the performance counter hardware */ release_pmc_hardware(); } return op_per_cpu_rc; }

Contributors

PersonTokensPropCommitsCommitProp
andrew mortonandrew morton3544.30%120.00%
bob nelsonbob nelson2734.18%120.00%
david gibsondavid gibson1518.99%120.00%
stephen rothwellstephen rothwell11.27%120.00%
andy flemingandy fleming11.27%120.00%
Total79100.00%5100.00%


static void op_powerpc_shutdown(void) { release_pmc_hardware(); }

Contributors

PersonTokensPropCommitsCommitProp
andrew mortonandrew morton763.64%125.00%
anton blanchardanton blanchard218.18%125.00%
david gibsondavid gibson19.09%125.00%
stephen rothwellstephen rothwell19.09%125.00%
Total11100.00%4100.00%


static void op_powerpc_cpu_start(void *dummy) { /* If any of the cpus have return an error, set the * global flag to the error so it can be returned * to the generic OProfile caller. */ int ret; ret = model->start(ctr); if (ret != 0) op_per_cpu_rc = ret; }

Contributors

PersonTokensPropCommitsCommitProp
andrew mortonandrew morton1648.48%133.33%
bob nelsonbob nelson1648.48%133.33%
stephen rothwellstephen rothwell13.03%133.33%
Total33100.00%3100.00%


static int op_powerpc_start(void) { op_per_cpu_rc = 0; if (model->global_start) return model->global_start(ctr); if (model->start) { on_each_cpu(op_powerpc_cpu_start, NULL, 1); return op_per_cpu_rc; } return -EIO; /* No start function is defined for this power architecture */ }

Contributors

PersonTokensPropCommitsCommitProp
maynard johnsonmaynard johnson1835.29%125.00%
andrew mortonandrew morton1733.33%125.00%
bob nelsonbob nelson1427.45%125.00%
stephen rothwellstephen rothwell23.92%125.00%
Total51100.00%4100.00%


static inline void op_powerpc_cpu_stop(void *dummy) { model->stop(); }

Contributors

PersonTokensPropCommitsCommitProp
andrew mortonandrew morton1593.75%150.00%
stephen rothwellstephen rothwell16.25%150.00%
Total16100.00%2100.00%


static void op_powerpc_stop(void) { if (model->stop) on_each_cpu(op_powerpc_cpu_stop, NULL, 1); if (model->global_stop) model->global_stop(); }

Contributors

PersonTokensPropCommitsCommitProp
maynard johnsonmaynard johnson1750.00%133.33%
andrew mortonandrew morton1544.12%133.33%
stephen rothwellstephen rothwell25.88%133.33%
Total34100.00%3100.00%


static int op_powerpc_create_files(struct dentry *root) { int i; #ifdef CONFIG_PPC64 /* * There is one mmcr0, mmcr1 and mmcra for setting the events for * all of the counters. */ oprofilefs_create_ulong(root, "mmcr0", &sys.mmcr0); oprofilefs_create_ulong(root, "mmcr1", &sys.mmcr1); oprofilefs_create_ulong(root, "mmcra", &sys.mmcra); #ifdef CONFIG_OPROFILE_CELL /* create a file the user tool can check to see what level of profiling * support exits with this kernel. Initialize bit mask to indicate * what support the kernel has: * bit 0 - Supports SPU event profiling in addition to PPU * event and cycles; and SPU cycle profiling * bits 1-31 - Currently unused. * * If the file does not exist, then the kernel only supports SPU * cycle profiling, PPU event and cycle profiling. */ oprofilefs_create_ulong(root, "cell_support", &sys.cell_support); sys.cell_support = 0x1; /* Note, the user OProfile tool must check * that this bit is set before attempting to * user SPU event profiling. Older kernels * will not have this file, hence the user * tool is not allowed to do SPU event * profiling on older kernels. Older kernels * will accept SPU events but collected data * is garbage. */ #endif #endif for (i = 0; i < model->num_counters; ++i) { struct dentry *dir; char buf[4]; snprintf(buf, sizeof buf, "%d", i); dir = oprofilefs_mkdir(root, buf); oprofilefs_create_ulong(dir, "enabled", &ctr[i].enabled); oprofilefs_create_ulong(dir, "event", &ctr[i].event); oprofilefs_create_ulong(dir, "count", &ctr[i].count); /* * Classic PowerPC doesn't support per-counter * control like this, but the options are * expected, so they remain. For Freescale * Book-E style performance monitors, we do * support them. */ oprofilefs_create_ulong(dir, "kernel", &ctr[i].kernel); oprofilefs_create_ulong(dir, "user", &ctr[i].user); oprofilefs_create_ulong(dir, "unit_mask", &ctr[i].unit_mask); } oprofilefs_create_ulong(root, "enable_kernel", &sys.enable_kernel); oprofilefs_create_ulong(root, "enable_user", &sys.enable_user); /* Default to tracing both kernel and user */ sys.enable_kernel = 1; sys.enable_user = 1; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
andrew mortonandrew morton17567.05%114.29%
anton blanchardanton blanchard4718.01%114.29%
carl lovecarl love249.20%114.29%
al viroal viro72.68%114.29%
stephen rothwellstephen rothwell51.92%114.29%
andy flemingandy fleming20.77%114.29%
markus armbrustermarkus armbruster10.38%114.29%
Total261100.00%7100.00%


int __init oprofile_arch_init(struct oprofile_operations *ops) { if (!cur_cpu_spec->oprofile_cpu_type) return -ENODEV; switch (cur_cpu_spec->oprofile_type) { #ifdef CONFIG_PPC_BOOK3S_64 #ifdef CONFIG_OPROFILE_CELL case PPC_OPROFILE_CELL: if (firmware_has_feature(FW_FEATURE_LPAR)) return -ENODEV; model = &op_model_cell; ops->sync_start = model->sync_start; ops->sync_stop = model->sync_stop; break; #endif case PPC_OPROFILE_POWER4: model = &op_model_power4; break; case PPC_OPROFILE_PA6T: model = &op_model_pa6t; break; #endif #ifdef CONFIG_6xx case PPC_OPROFILE_G4: model = &op_model_7450; break; #endif #if defined(CONFIG_FSL_EMB_PERFMON) case PPC_OPROFILE_FSL_EMB: model = &op_model_fsl_emb; break; #endif default: return -ENODEV; } model->num_counters = cur_cpu_spec->num_pmcs; ops->cpu_type = cur_cpu_spec->oprofile_cpu_type; ops->create_files = op_powerpc_create_files; ops->setup = op_powerpc_setup; ops->shutdown = op_powerpc_shutdown; ops->start = op_powerpc_start; ops->stop = op_powerpc_stop; ops->backtrace = op_powerpc_backtrace; printk(KERN_DEBUG "oprofile: using %s performance monitoring.\n", ops->cpu_type); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
anton blanchardanton blanchard6332.31%422.22%
greg banksgreg banks2412.31%15.56%
andrew mortonandrew morton2211.28%15.56%
bob nelsonbob nelson178.72%15.56%
andy flemingandy fleming136.67%211.11%
maynard johnsonmaynard johnson136.67%15.56%
kou ishizakikou ishizaki115.64%15.56%
olof johanssonolof johansson105.13%211.11%
akinobu mitaakinobu mita84.10%15.56%
brian roganbrian rogan63.08%15.56%
stephen rothwellstephen rothwell52.56%15.56%
andy whitcroftandy whitcroft21.03%15.56%
benjamin herrenschmidtbenjamin herrenschmidt10.51%15.56%
Total195100.00%18100.00%


void oprofile_arch_exit(void) { }

Contributors

PersonTokensPropCommitsCommitProp
andrew mortonandrew morton583.33%150.00%
andy flemingandy fleming116.67%150.00%
Total6100.00%2100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
andrew mortonandrew morton36245.88%13.57%
anton blanchardanton blanchard11614.70%725.00%
bob nelsonbob nelson9311.79%13.57%
maynard johnsonmaynard johnson486.08%13.57%
andy flemingandy fleming344.31%310.71%
greg banksgreg banks243.04%13.57%
carl lovecarl love243.04%13.57%
stephen rothwellstephen rothwell202.53%27.14%
david gibsondavid gibson192.41%13.57%
kou ishizakikou ishizaki111.39%13.57%
olof johanssonolof johansson101.27%27.14%
akinobu mitaakinobu mita81.01%13.57%
al viroal viro70.89%13.57%
brian roganbrian rogan60.76%13.57%
kelly dalykelly daly30.38%13.57%
andy whitcroftandy whitcroft20.25%13.57%
markus armbrustermarkus armbruster10.13%13.57%
benjamin herrenschmidtbenjamin herrenschmidt10.13%13.57%
Total789100.00%28100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.