Release 4.10 drivers/ata/ahci_brcm.c
/*
* Broadcom SATA3 AHCI Controller Driver
*
* Copyright © 2009-2015 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/ahci_platform.h>
#include <linux/compiler.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/libata.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/string.h>
#include "ahci.h"
#define DRV_NAME "brcm-ahci"
#define SATA_TOP_CTRL_VERSION 0x0
#define SATA_TOP_CTRL_BUS_CTRL 0x4
#define MMIO_ENDIAN_SHIFT 0
/* CPU->AHCI */
#define DMADESC_ENDIAN_SHIFT 2
/* AHCI->DDR */
#define DMADATA_ENDIAN_SHIFT 4
/* AHCI->DDR */
#define PIODATA_ENDIAN_SHIFT 6
#define ENDIAN_SWAP_NONE 0
#define ENDIAN_SWAP_FULL 2
#define OVERRIDE_HWINIT BIT(16)
#define SATA_TOP_CTRL_TP_CTRL 0x8
#define SATA_TOP_CTRL_PHY_CTRL 0xc
#define SATA_TOP_CTRL_PHY_CTRL_1 0x0
#define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
#define SATA_TOP_CTRL_PHY_CTRL_2 0x4
#define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
#define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
#define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
#define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
#define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
#define SATA_TOP_CTRL_PHY_OFFS 0x8
#define SATA_TOP_MAX_PHYS 2
#define SATA_FIRST_PORT_CTRL 0x700
#define SATA_NEXT_PORT_CTRL_OFFSET 0x80
#define SATA_PORT_PCTRL6(reg_base) (reg_base + 0x18)
/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
#define DATA_ENDIAN 2
/* AHCI->DDR inbound accesses */
#define MMIO_ENDIAN 2
/* CPU->AHCI outbound accesses */
#else
#define DATA_ENDIAN 0
#define MMIO_ENDIAN 0
#endif
#define BUS_CTRL_ENDIAN_CONF \
((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
enum brcm_ahci_version {
BRCM_SATA_BCM7425 = 1,
BRCM_SATA_BCM7445,
BRCM_SATA_NSP,
};
enum brcm_ahci_quirks {
BRCM_AHCI_QUIRK_NO_NCQ = BIT(0),
BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
};
struct brcm_ahci_priv {
struct device *dev;
void __iomem *top_ctrl;
u32 port_mask;
u32 quirks;
enum brcm_ahci_version version;
};
static const struct ata_port_info ahci_brcm_port_info = {
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
.link_flags = ATA_LFLAG_NO_DB_DELAY,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops,
};
static inline u32 brcm_sata_readreg(void __iomem *addr)
{
/*
* MIPS endianness is configured by boot strap, which also reverses all
* bus endianness (i.e., big-endian CPU + big endian bus ==> native
* endian I/O).
*
* Other architectures (e.g., ARM) either do not support big endian, or
* else leave I/O in little endian mode.
*/
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
return __raw_readl(addr);
else
return readl_relaxed(addr);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 37 | 97.37% | 1 | 50.00% |
| axel lin | axel lin | 1 | 2.63% | 1 | 50.00% |
| Total | 38 | 100.00% | 2 | 100.00% |
static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
{
/* See brcm_sata_readreg() comments */
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
__raw_writel(val, addr);
else
writel_relaxed(val, addr);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 42 | 97.67% | 1 | 50.00% |
| axel lin | axel lin | 1 | 2.33% | 1 | 50.00% |
| Total | 43 | 100.00% | 2 | 100.00% |
static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
{
struct brcm_ahci_priv *priv = hpriv->plat_data;
u32 bus_ctrl, port_ctrl, host_caps;
int i;
/* Enable support for ALPM */
bus_ctrl = brcm_sata_readreg(priv->top_ctrl +
SATA_TOP_CTRL_BUS_CTRL);
brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT,
priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
host_caps = readl(hpriv->mmio + HOST_CAP);
writel(host_caps | HOST_CAP_ALPM, hpriv->mmio);
brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
/*
* Adjust timeout to allow PLL sufficient time to lock while waking
* up from slumber mode.
*/
for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
i < SATA_TOP_MAX_PHYS;
i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
if (priv->port_mask & BIT(i))
writel(0xff1003fc,
hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| danesh petigara | danesh petigara | 137 | 100.00% | 1 | 100.00% |
| Total | 137 | 100.00% | 1 | 100.00% |
static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
{
void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
(port * SATA_TOP_CTRL_PHY_OFFS);
void __iomem *p;
u32 reg;
if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
return;
/* clear PHY_DEFAULT_POWER_STATE */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
reg = brcm_sata_readreg(p);
reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
brcm_sata_writereg(reg, p);
/* reset the PHY digital logic */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
reg = brcm_sata_readreg(p);
reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
SATA_TOP_CTRL_2_SW_RST_RX);
reg |= SATA_TOP_CTRL_2_SW_RST_TX;
brcm_sata_writereg(reg, p);
reg = brcm_sata_readreg(p);
reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
brcm_sata_writereg(reg, p);
reg = brcm_sata_readreg(p);
reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
brcm_sata_writereg(reg, p);
(void)brcm_sata_readreg(p);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 146 | 94.19% | 1 | 50.00% |
| jaedon shin | jaedon shin | 9 | 5.81% | 1 | 50.00% |
| Total | 155 | 100.00% | 2 | 100.00% |
static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
{
void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
(port * SATA_TOP_CTRL_PHY_OFFS);
void __iomem *p;
u32 reg;
if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
return;
/* power-off the PHY digital logic */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
reg = brcm_sata_readreg(p);
reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
brcm_sata_writereg(reg, p);
/* set PHY_DEFAULT_POWER_STATE */
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
reg = brcm_sata_readreg(p);
reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
brcm_sata_writereg(reg, p);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 99 | 91.67% | 1 | 50.00% |
| jaedon shin | jaedon shin | 9 | 8.33% | 1 | 50.00% |
| Total | 108 | 100.00% | 2 | 100.00% |
static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
{
int i;
for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
if (priv->port_mask & BIT(i))
brcm_sata_phy_enable(priv, i);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 45 | 100.00% | 1 | 100.00% |
| Total | 45 | 100.00% | 1 | 100.00% |
static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
{
int i;
for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
if (priv->port_mask & BIT(i))
brcm_sata_phy_disable(priv, i);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 45 | 100.00% | 1 | 100.00% |
| Total | 45 | 100.00% | 1 | 100.00% |
static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
struct brcm_ahci_priv *priv)
{
void __iomem *ahci;
struct resource *res;
u32 impl;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
ahci = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ahci))
return 0;
impl = readl(ahci + HOST_PORTS_IMPL);
if (fls(impl) > SATA_TOP_MAX_PHYS)
dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
impl);
else if (!impl)
dev_info(priv->dev, "no ports found\n");
devm_iounmap(&pdev->dev, ahci);
devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
return impl;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 136 | 100.00% | 1 | 100.00% |
| Total | 136 | 100.00% | 1 | 100.00% |
static void brcm_sata_init(struct brcm_ahci_priv *priv)
{
void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
/* Configure endianness */
if (priv->version == BRCM_SATA_NSP) {
u32 data = brcm_sata_readreg(ctrl);
data &= ~((0x03 << DMADATA_ENDIAN_SHIFT) |
(0x03 << DMADESC_ENDIAN_SHIFT));
data |= (0x02 << DMADATA_ENDIAN_SHIFT) |
(0x02 << DMADESC_ENDIAN_SHIFT);
brcm_sata_writereg(data, ctrl);
} else
brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, ctrl);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| yendapally reddy dhananjaya reddy | yendapally reddy dhananjaya reddy | 69 | 79.31% | 1 | 50.00% |
| brian norris | brian norris | 18 | 20.69% | 1 | 50.00% |
| Total | 87 | 100.00% | 2 | 100.00% |
#ifdef CONFIG_PM_SLEEP
static int brcm_ahci_suspend(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
struct brcm_ahci_priv *priv = hpriv->plat_data;
int ret;
ret = ahci_platform_suspend(dev);
brcm_sata_phys_disable(priv);
return ret;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 57 | 100.00% | 1 | 100.00% |
| Total | 57 | 100.00% | 1 | 100.00% |
static int brcm_ahci_resume(struct device *dev)
{
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
struct brcm_ahci_priv *priv = hpriv->plat_data;
brcm_sata_init(priv);
brcm_sata_phys_enable(priv);
brcm_sata_alpm_init(hpriv);
return ahci_platform_resume(dev);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 55 | 91.67% | 1 | 50.00% |
| danesh petigara | danesh petigara | 5 | 8.33% | 1 | 50.00% |
| Total | 60 | 100.00% | 2 | 100.00% |
#endif
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
static const struct of_device_id ahci_of_match[] = {
{.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
static int brcm_ahci_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id;
struct device *dev = &pdev->dev;
struct brcm_ahci_priv *priv;
struct ahci_host_priv *hpriv;
struct resource *res;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
if (!of_id)
return -ENODEV;
priv->version = (enum brcm_ahci_version)of_id->data;
priv->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
priv->top_ctrl = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->top_ctrl))
return PTR_ERR(priv->top_ctrl);
if ((priv->version == BRCM_SATA_BCM7425) ||
(priv->version == BRCM_SATA_NSP)) {
priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
}
brcm_sata_init(priv);
priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
if (!priv->port_mask)
return -ENODEV;
brcm_sata_phys_enable(priv);
hpriv = ahci_platform_get_resources(pdev);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
hpriv->plat_data = priv;
hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
brcm_sata_alpm_init(hpriv);
ret = ahci_platform_enable_resources(hpriv);
if (ret)
return ret;
if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
hpriv->flags |= AHCI_HFLAG_NO_NCQ;
ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
&ahci_platform_sht);
if (ret)
return ret;
dev_info(dev, "Broadcom AHCI SATA3 registered\n");
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 212 | 68.61% | 1 | 16.67% |
| yendapally reddy dhananjaya reddy | yendapally reddy dhananjaya reddy | 54 | 17.48% | 1 | 16.67% |
| jaedon shin | jaedon shin | 32 | 10.36% | 2 | 33.33% |
| danesh petigara | danesh petigara | 11 | 3.56% | 2 | 33.33% |
| Total | 309 | 100.00% | 6 | 100.00% |
static int brcm_ahci_remove(struct platform_device *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
struct ahci_host_priv *hpriv = host->private_data;
struct brcm_ahci_priv *priv = hpriv->plat_data;
int ret;
ret = ata_platform_remove_one(pdev);
if (ret)
return ret;
brcm_sata_phys_disable(priv);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 67 | 100.00% | 1 | 100.00% |
| Total | 67 | 100.00% | 1 | 100.00% |
static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
static struct platform_driver brcm_ahci_driver = {
.probe = brcm_ahci_probe,
.remove = brcm_ahci_remove,
.driver = {
.name = DRV_NAME,
.of_match_table = ahci_of_match,
.pm = &ahci_brcm_pm_ops,
},
};
module_platform_driver(brcm_ahci_driver);
MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
MODULE_AUTHOR("Brian Norris");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:sata-brcmstb");
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| brian norris | brian norris | 1261 | 73.36% | 1 | 10.00% |
| yendapally reddy dhananjaya reddy | yendapally reddy dhananjaya reddy | 205 | 11.93% | 1 | 10.00% |
| danesh petigara | danesh petigara | 175 | 10.18% | 4 | 40.00% |
| jaedon shin | jaedon shin | 71 | 4.13% | 2 | 20.00% |
| florian fainelli | florian fainelli | 5 | 0.29% | 1 | 10.00% |
| axel lin | axel lin | 2 | 0.12% | 1 | 10.00% |
| Total | 1719 | 100.00% | 10 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.