cregit-Linux how code gets into the kernel

Release 4.10 drivers/bus/uniphier-system-bus.c

Directory: drivers/bus
/*
 * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/io.h>
#include <linux/log2.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>

/* System Bus Controller registers */

#define UNIPHIER_SBC_BASE	0x100	
/* base address of bank0 space */

#define    UNIPHIER_SBC_BASE_BE		BIT(0)	
/* bank_enable */

#define UNIPHIER_SBC_CTRL0	0x200	
/* timing parameter 0 of bank0 */

#define UNIPHIER_SBC_CTRL1	0x204	
/* timing parameter 1 of bank0 */

#define UNIPHIER_SBC_CTRL2	0x208	
/* timing parameter 2 of bank0 */

#define UNIPHIER_SBC_CTRL3	0x20c	
/* timing parameter 3 of bank0 */

#define UNIPHIER_SBC_CTRL4	0x300	
/* timing parameter 4 of bank0 */


#define UNIPHIER_SBC_STRIDE	0x10	
/* register stride to next bank */

#define UNIPHIER_SBC_NR_BANKS	8	
/* number of banks (chip select) */

#define UNIPHIER_SBC_BASE_DUMMY	0xffffffff	
/* data to squash bank 0, 1 */


struct uniphier_system_bus_bank {
	
u32 base;
	
u32 end;
};


struct uniphier_system_bus_priv {
	
struct device *dev;
	
void __iomem *membase;
	
struct uniphier_system_bus_bank bank[UNIPHIER_SBC_NR_BANKS];
};


static int uniphier_system_bus_add_bank(struct uniphier_system_bus_priv *priv, int bank, u32 addr, u64 paddr, u32 size) { u64 end, mask; dev_dbg(priv->dev, "range found: bank = %d, addr = %08x, paddr = %08llx, size = %08x\n", bank, addr, paddr, size); if (bank >= ARRAY_SIZE(priv->bank)) { dev_err(priv->dev, "unsupported bank number %d\n", bank); return -EINVAL; } if (priv->bank[bank].base || priv->bank[bank].end) { dev_err(priv->dev, "range for bank %d has already been specified\n", bank); return -EINVAL; } if (paddr > U32_MAX) { dev_err(priv->dev, "base address %llx is too high\n", paddr); return -EINVAL; } end = paddr + size; if (addr > paddr) { dev_err(priv->dev, "base %08x cannot be mapped to %08llx of parent\n", addr, paddr); return -EINVAL; } paddr -= addr; paddr = round_down(paddr, 0x00020000); end = round_up(end, 0x00020000); if (end > U32_MAX) { dev_err(priv->dev, "end address %08llx is too high\n", end); return -EINVAL; } mask = paddr ^ (end - 1); mask = roundup_pow_of_two(mask); paddr = round_down(paddr, mask); end = round_up(end, mask); priv->bank[bank].base = paddr; priv->bank[bank].end = end; dev_dbg(priv->dev, "range added: bank = %d, addr = %08x, end = %08x\n", bank, priv->bank[bank].base, priv->bank[bank].end); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
masahiro yamadamasahiro yamada298100.00%1100.00%
Total298100.00%1100.00%


static int uniphier_system_bus_check_overlap( const struct uniphier_system_bus_priv *priv) { int i, j; for (i = 0; i < ARRAY_SIZE(priv->bank); i++) { for (j = i + 1; j < ARRAY_SIZE(priv->bank); j++) { if (priv->bank[i].end > priv->bank[j].base && priv->bank[i].base < priv->bank[j].end) { dev_err(priv->dev, "region overlap between bank%d and bank%d\n", i, j); return -EINVAL; } } } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
masahiro yamadamasahiro yamada11899.16%150.00%
kunihiko hayashikunihiko hayashi10.84%150.00%
Total119100.00%2100.00%


static void uniphier_system_bus_check_boot_swap( struct uniphier_system_bus_priv *priv) { void __iomem *base_reg = priv->membase + UNIPHIER_SBC_BASE; int is_swapped; is_swapped = !(readl(base_reg) & UNIPHIER_SBC_BASE_BE); dev_dbg(priv->dev, "Boot Swap: %s\n", is_swapped ? "on" : "off"); /* * If BOOT_SWAP was asserted on power-on-reset, the CS0 and CS1 are * swapped. In this case, bank0 and bank1 should be swapped as well. */ if (is_swapped) swap(priv->bank[0], priv->bank[1]); }

Contributors

PersonTokensPropCommitsCommitProp
masahiro yamadamasahiro yamada74100.00%1100.00%
Total74100.00%1100.00%


static void uniphier_system_bus_set_reg( const struct uniphier_system_bus_priv *priv) { void __iomem *base_reg = priv->membase + UNIPHIER_SBC_BASE; u32 base, end, mask, val; int i; for (i = 0; i < ARRAY_SIZE(priv->bank); i++) { base = priv->bank[i].base; end = priv->bank[i].end; if (base == end) { /* * If SBC_BASE0 or SBC_BASE1 is set to zero, the access * to anywhere in the system bus space is routed to * bank 0 (if boot swap if off) or bank 1 (if boot swap * if on). It means that CPUs cannot get access to * bank 2 or later. In other words, bank 0/1 cannot * be disabled even if its bank_enable bits is cleared. * This seems odd, but it is how this hardware goes. * As a workaround, dummy data (0xffffffff) should be * set when the bank 0/1 is unused. As for bank 2 and * later, they can be simply disable by clearing the * bank_enable bit. */ if (i < 2) val = UNIPHIER_SBC_BASE_DUMMY; else val = 0; } else { mask = base ^ (end - 1); val = base & 0xfffe0000; val |= (~mask >> 16) & 0xfffe; val |= UNIPHIER_SBC_BASE_BE; } dev_dbg(priv->dev, "SBC_BASE[%d] = 0x%08x\n", i, val); writel(val, base_reg + UNIPHIER_SBC_STRIDE * i); } }

Contributors

PersonTokensPropCommitsCommitProp
masahiro yamadamasahiro yamada159100.00%1100.00%
Total159100.00%1100.00%


static int uniphier_system_bus_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct uniphier_system_bus_priv *priv; struct resource *regs; const __be32 *ranges; u32 cells, addr, size; u64 paddr; int pna, bank, rlen, rone, ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); priv->membase = devm_ioremap_resource(dev, regs); if (IS_ERR(priv->membase)) return PTR_ERR(priv->membase); priv->dev = dev; pna = of_n_addr_cells(dev->of_node); ret = of_property_read_u32(dev->of_node, "#address-cells", &cells); if (ret) { dev_err(dev, "failed to get #address-cells\n"); return ret; } if (cells != 2) { dev_err(dev, "#address-cells must be 2\n"); return -EINVAL; } ret = of_property_read_u32(dev->of_node, "#size-cells", &cells); if (ret) { dev_err(dev, "failed to get #size-cells\n"); return ret; } if (cells != 1) { dev_err(dev, "#size-cells must be 1\n"); return -EINVAL; } ranges = of_get_property(dev->of_node, "ranges", &rlen); if (!ranges) { dev_err(dev, "failed to get ranges property\n"); return -ENOENT; } rlen /= sizeof(*ranges); rone = pna + 2; for (; rlen >= rone; rlen -= rone) { bank = be32_to_cpup(ranges++); addr = be32_to_cpup(ranges++); paddr = of_translate_address(dev->of_node, ranges); if (paddr == OF_BAD_ADDR) return -EINVAL; ranges += pna; size = be32_to_cpup(ranges++); ret = uniphier_system_bus_add_bank(priv, bank, addr, paddr, size); if (ret) return ret; } ret = uniphier_system_bus_check_overlap(priv); if (ret) return ret; uniphier_system_bus_check_boot_swap(priv); uniphier_system_bus_set_reg(priv); /* Now, the bus is configured. Populate platform_devices below it */ return of_platform_default_populate(dev->of_node, NULL, dev); }

Contributors

PersonTokensPropCommitsCommitProp
masahiro yamadamasahiro yamada39999.75%150.00%
kefeng wangkefeng wang10.25%150.00%
Total400100.00%2100.00%

static const struct of_device_id uniphier_system_bus_match[] = { { .compatible = "socionext,uniphier-system-bus" }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, uniphier_system_bus_match); static struct platform_driver uniphier_system_bus_driver = { .probe = uniphier_system_bus_probe, .driver = { .name = "uniphier-system-bus", .of_match_table = uniphier_system_bus_match, }, }; module_platform_driver(uniphier_system_bus_driver); MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>"); MODULE_DESCRIPTION("UniPhier System Bus driver"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
masahiro yamadamasahiro yamada122899.84%133.33%
kefeng wangkefeng wang10.08%133.33%
kunihiko hayashikunihiko hayashi10.08%133.33%
Total1230100.00%3100.00%
Directory: drivers/bus
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.