cregit-Linux how code gets into the kernel

Release 4.10 drivers/hwmon/lm63.c

Directory: drivers/hwmon
/*
 * lm63.c - driver for the National Semiconductor LM63 temperature sensor
 *          with integrated fan control
 * Copyright (C) 2004-2008  Jean Delvare <jdelvare@suse.de>
 * Based on the lm90 driver.
 *
 * The LM63 is a sensor chip made by National Semiconductor. It measures
 * two temperatures (its own and one external one) and the speed of one
 * fan, those speed it can additionally control. Complete datasheet can be
 * obtained from National's website at:
 *   http://www.national.com/pf/LM/LM63.html
 *
 * The LM63 is basically an LM86 with fan speed monitoring and control
 * capabilities added. It misses some of the LM86 features though:
 *  - No low limit for local temperature.
 *  - No critical limit for local temperature.
 *  - Critical limit for remote temperature can be changed only once. We
 *    will consider that the critical limit is read-only.
 *
 * The datasheet isn't very clear about what the tachometer reading is.
 * I had a explanation from National Semiconductor though. The two lower
 * bits of the read value have to be masked out. The value is still 16 bit
 * in width.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/types.h>

/*
 * Addresses to scan
 * Address is fully defined internally and cannot be changed except for
 * LM64 which has one pin dedicated to address selection.
 * LM63 and LM96163 have address 0x4c.
 * LM64 can have address 0x18 or 0x4e.
 */


static const unsigned short normal_i2c[] = { 0x18, 0x4c, 0x4e, I2C_CLIENT_END };

/*
 * The LM63 registers
 */


#define LM63_REG_CONFIG1		0x03

#define LM63_REG_CONVRATE		0x04

#define LM63_REG_CONFIG2		0xBF

#define LM63_REG_CONFIG_FAN		0x4A


#define LM63_REG_TACH_COUNT_MSB		0x47

#define LM63_REG_TACH_COUNT_LSB		0x46

#define LM63_REG_TACH_LIMIT_MSB		0x49

#define LM63_REG_TACH_LIMIT_LSB		0x48


#define LM63_REG_PWM_VALUE		0x4C

#define LM63_REG_PWM_FREQ		0x4D

#define LM63_REG_LUT_TEMP_HYST		0x4F

#define LM63_REG_LUT_TEMP(nr)		(0x50 + 2 * (nr))

#define LM63_REG_LUT_PWM(nr)		(0x51 + 2 * (nr))


#define LM63_REG_LOCAL_TEMP		0x00

#define LM63_REG_LOCAL_HIGH		0x05


#define LM63_REG_REMOTE_TEMP_MSB	0x01

#define LM63_REG_REMOTE_TEMP_LSB	0x10

#define LM63_REG_REMOTE_OFFSET_MSB	0x11

#define LM63_REG_REMOTE_OFFSET_LSB	0x12

#define LM63_REG_REMOTE_HIGH_MSB	0x07

#define LM63_REG_REMOTE_HIGH_LSB	0x13

#define LM63_REG_REMOTE_LOW_MSB		0x08

#define LM63_REG_REMOTE_LOW_LSB		0x14

#define LM63_REG_REMOTE_TCRIT		0x19

#define LM63_REG_REMOTE_TCRIT_HYST	0x21


#define LM63_REG_ALERT_STATUS		0x02

#define LM63_REG_ALERT_MASK		0x16


#define LM63_REG_MAN_ID			0xFE

#define LM63_REG_CHIP_ID		0xFF


#define LM96163_REG_TRUTHERM		0x30

#define LM96163_REG_REMOTE_TEMP_U_MSB	0x31

#define LM96163_REG_REMOTE_TEMP_U_LSB	0x32

#define LM96163_REG_CONFIG_ENHANCED	0x45


#define LM63_MAX_CONVRATE		9


#define LM63_MAX_CONVRATE_HZ		32

#define LM96163_MAX_CONVRATE_HZ		26

/*
 * Conversions and various macros
 * For tachometer counts, the LM63 uses 16-bit values.
 * For local temperature and high limit, remote critical limit and hysteresis
 * value, it uses signed 8-bit values with LSB = 1 degree Celsius.
 * For remote temperature, low and high limits, it uses signed 11-bit values
 * with LSB = 0.125 degree Celsius, left-justified in 16-bit registers.
 * For LM64 the actual remote diode temperature is 16 degree Celsius higher
 * than the register reading. Remote temperature setpoints have to be
 * adapted accordingly.
 */


#define FAN_FROM_REG(reg)	((reg) == 0xFFFC || (reg) == 0 ? 0 : \
                                 5400000 / (reg))

#define FAN_TO_REG(val)		((val) <= 82 ? 0xFFFC : \
                                 (5400000 / (val)) & 0xFFFC)

#define TEMP8_FROM_REG(reg)	((reg) * 1000)

#define TEMP8_TO_REG(val)	DIV_ROUND_CLOSEST(clamp_val((val), -128000, \
                                                            127000), 1000)

#define TEMP8U_TO_REG(val)	DIV_ROUND_CLOSEST(clamp_val((val), 0, \
                                                            255000), 1000)

#define TEMP11_FROM_REG(reg)	((reg) / 32 * 125)

#define TEMP11_TO_REG(val)	(DIV_ROUND_CLOSEST(clamp_val((val), -128000, \
                                                             127875), 125) * 32)

#define TEMP11U_TO_REG(val)	(DIV_ROUND_CLOSEST(clamp_val((val), 0, \
                                                             255875), 125) * 32)

#define HYST_TO_REG(val)	DIV_ROUND_CLOSEST(clamp_val((val), 0, 127000), \
                                                  1000)


#define UPDATE_INTERVAL(max, rate) \
			((1000 << (LM63_MAX_CONVRATE - (rate))) / (max))





enum chips { lm63, lm64, lm96163 };

/*
 * Client data (each client gets its own)
 */


struct lm63_data {
	
struct i2c_client *client;
	
struct mutex update_lock;
	
const struct attribute_group *groups[5];
	
char valid; /* zero until following fields are valid */
	
char lut_valid; /* zero until lut fields are valid */
	
unsigned long last_updated; /* in jiffies */
	
unsigned long lut_last_updated; /* in jiffies */
	
enum chips kind;
	
int temp2_offset;

	
int update_interval;	/* in milliseconds */
	
int max_convrate_hz;
	
int lut_size;		/* 8 or 12 */

	/* registers values */
	

u8 config, config_fan;
	
u16 fan[2];	/* 0: input
                           1: low limit */
	
u8 pwm1_freq;
	
u8 pwm1[13];	/* 0: current output
                           1-12: lookup table */
	
s8 temp8[15];	/* 0: local input
                           1: local high limit
                           2: remote critical limit
                           3-14: lookup table */
	
s16 temp11[4];	/* 0: remote input
                           1: remote low limit
                           2: remote high limit
                           3: remote offset */
	
u16 temp11u;	/* remote input (unsigned) */
	
u8 temp2_crit_hyst;
	
u8 lut_temp_hyst;
	
u8 alarms;
	
bool pwm_highres;
	
bool lut_temp_highres;
	
bool remote_unsigned; /* true if unsigned remote upper limits */
	
bool trutherm;
};


static inline int temp8_from_reg(struct lm63_data *data, int nr) { if (data->remote_unsigned) return TEMP8_FROM_REG((u8)data->temp8[nr]); return TEMP8_FROM_REG(data->temp8[nr]); }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck46100.00%1100.00%
Total46100.00%1100.00%


static inline int lut_temp_from_reg(struct lm63_data *data, int nr) { return data->temp8[nr] * (data->lut_temp_highres ? 500 : 1000); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare33100.00%1100.00%
Total33100.00%1100.00%


static inline int lut_temp_to_reg(struct lm63_data *data, long val) { val -= data->temp2_offset; if (data->lut_temp_highres) return DIV_ROUND_CLOSEST(clamp_val(val, 0, 127500), 500); else return DIV_ROUND_CLOSEST(clamp_val(val, 0, 127000), 1000); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare5696.55%150.00%
guenter roeckguenter roeck23.45%150.00%
Total58100.00%2100.00%

/* * Update the lookup table register cache. * client->update_lock must be held when calling this function. */
static void lm63_update_lut(struct lm63_data *data) { struct i2c_client *client = data->client; int i; if (time_after(jiffies, data->lut_last_updated + 5 * HZ) || !data->lut_valid) { for (i = 0; i < data->lut_size; i++) { data->pwm1[1 + i] = i2c_smbus_read_byte_data(client, LM63_REG_LUT_PWM(i)); data->temp8[3 + i] = i2c_smbus_read_byte_data(client, LM63_REG_LUT_TEMP(i)); } data->lut_temp_hyst = i2c_smbus_read_byte_data(client, LM63_REG_LUT_TEMP_HYST); data->lut_last_updated = jiffies; data->lut_valid = 1; } }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare11795.12%150.00%
guenter roeckguenter roeck64.88%150.00%
Total123100.00%2100.00%


static struct lm63_data *lm63_update_device(struct device *dev) { struct lm63_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; unsigned long next_update; mutex_lock(&data->update_lock); next_update = data->last_updated + msecs_to_jiffies(data->update_interval); if (time_after(jiffies, next_update) || !data->valid) { if (data->config & 0x04) { /* tachometer enabled */ /* order matters for fan1_input */ data->fan[0] = i2c_smbus_read_byte_data(client, LM63_REG_TACH_COUNT_LSB) & 0xFC; data->fan[0] |= i2c_smbus_read_byte_data(client, LM63_REG_TACH_COUNT_MSB) << 8; data->fan[1] = (i2c_smbus_read_byte_data(client, LM63_REG_TACH_LIMIT_LSB) & 0xFC) | (i2c_smbus_read_byte_data(client, LM63_REG_TACH_LIMIT_MSB) << 8); } data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); if (data->pwm1_freq == 0) data->pwm1_freq = 1; data->pwm1[0] = i2c_smbus_read_byte_data(client, LM63_REG_PWM_VALUE); data->temp8[0] = i2c_smbus_read_byte_data(client, LM63_REG_LOCAL_TEMP); data->temp8[1] = i2c_smbus_read_byte_data(client, LM63_REG_LOCAL_HIGH); /* order matters for temp2_input */ data->temp11[0] = i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TEMP_MSB) << 8; data->temp11[0] |= i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TEMP_LSB); data->temp11[1] = (i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_LOW_MSB) << 8) | i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_LOW_LSB); data->temp11[2] = (i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_HIGH_MSB) << 8) | i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_HIGH_LSB); data->temp11[3] = (i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_OFFSET_MSB) << 8) | i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_OFFSET_LSB); if (data->kind == lm96163) data->temp11u = (i2c_smbus_read_byte_data(client, LM96163_REG_REMOTE_TEMP_U_MSB) << 8) | i2c_smbus_read_byte_data(client, LM96163_REG_REMOTE_TEMP_U_LSB); data->temp8[2] = i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TCRIT); data->temp2_crit_hyst = i2c_smbus_read_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST); data->alarms = i2c_smbus_read_byte_data(client, LM63_REG_ALERT_STATUS) & 0x7F; data->last_updated = jiffies; data->valid = 1; } lm63_update_lut(data); mutex_unlock(&data->update_lock); return data; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare38693.01%660.00%
guenter roeckguenter roeck286.75%330.00%
ingo molnaringo molnar10.24%110.00%
Total415100.00%10100.00%

/* * Trip points in the lookup table should be in ascending order for both * temperatures and PWM output values. */
static int lm63_lut_looks_bad(struct device *dev, struct lm63_data *data) { int i; mutex_lock(&data->update_lock); lm63_update_lut(data); for (i = 1; i < data->lut_size; i++) { if (data->pwm1[1 + i - 1] > data->pwm1[1 + i] || data->temp8[3 + i - 1] > data->temp8[3 + i]) { dev_warn(dev, "Lookup table doesn't look sane (check entries %d and %d)\n", i, i + 1); break; } } mutex_unlock(&data->update_lock); return i == data->lut_size ? 0 : 1; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare12095.24%375.00%
guenter roeckguenter roeck64.76%125.00%
Total126100.00%4100.00%

/* * Sysfs callback functions and files */
static ssize_t show_fan(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[attr->index])); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare60100.00%2100.00%
Total60100.00%2100.00%


static ssize_t set_fan(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { struct lm63_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); data->fan[1] = FAN_TO_REG(val); i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_LSB, data->fan[1] & 0xFF); i2c_smbus_write_byte_data(client, LM63_REG_TACH_LIMIT_MSB, data->fan[1] >> 8); mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare8665.15%240.00%
dirk eibachdirk eibach3828.79%120.00%
guenter roeckguenter roeck86.06%240.00%
Total132100.00%5100.00%


static ssize_t show_pwm1(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); int nr = attr->index; int pwm; if (data->pwm_highres) pwm = data->pwm1[nr]; else pwm = data->pwm1[nr] >= 2 * data->pwm1_freq ? 255 : (data->pwm1[nr] * 255 + data->pwm1_freq) / (2 * data->pwm1_freq); return sprintf(buf, "%d\n", pwm); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare116100.00%2100.00%
Total116100.00%2100.00%


static ssize_t set_pwm1(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; int nr = attr->index; unsigned long val; int err; u8 reg; if (!(data->config_fan & 0x20)) /* register is read-only */ return -EPERM; err = kstrtoul(buf, 10, &val); if (err) return err; reg = nr ? LM63_REG_LUT_PWM(nr - 1) : LM63_REG_PWM_VALUE; val = clamp_val(val, 0, 255); mutex_lock(&data->update_lock); data->pwm1[nr] = data->pwm_highres ? val : (val * data->pwm1_freq * 2 + 127) / 255; i2c_smbus_write_byte_data(client, reg, data->pwm1[nr]); mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare15079.37%333.33%
guenter roeckguenter roeck3518.52%444.44%
ingo molnaringo molnar21.06%111.11%
dirk eibachdirk eibach21.06%111.11%
Total189100.00%9100.00%


static ssize_t show_pwm1_enable(struct device *dev, struct device_attribute *dummy, char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", data->config_fan & 0x20 ? 1 : 2); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare4695.83%266.67%
guenter roeckguenter roeck24.17%133.33%
Total48100.00%3100.00%


static ssize_t set_pwm1_enable(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { struct lm63_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; if (val < 1 || val > 2) return -EINVAL; /* * Only let the user switch to automatic mode if the lookup table * looks sane. */ if (val == 2 && lm63_lut_looks_bad(dev, data)) return -EPERM; mutex_lock(&data->update_lock); data->config_fan = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG_FAN); if (val == 1) data->config_fan |= 0x20; else data->config_fan &= ~0x20; i2c_smbus_write_byte_data(client, LM63_REG_CONFIG_FAN, data->config_fan); mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare15293.83%150.00%
guenter roeckguenter roeck106.17%150.00%
Total162100.00%2100.00%

/* * There are 8bit registers for both local(temp1) and remote(temp2) sensor. * For remote sensor registers temp2_offset has to be considered, * for local sensor it must not. * So we need separate 8bit accessors for local and remote sensor. */
static ssize_t show_local_temp8(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", TEMP8_FROM_REG(data->temp8[attr->index])); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare5591.67%266.67%
guenter roeckguenter roeck58.33%133.33%
Total60100.00%3100.00%


static ssize_t show_remote_temp8(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", temp8_from_reg(data, attr->index) + data->temp2_offset); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare5285.25%266.67%
guenter roeckguenter roeck914.75%133.33%
Total61100.00%3100.00%


static ssize_t show_lut_temp(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", lut_temp_from_reg(data, attr->index) + data->temp2_offset); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare5081.97%250.00%
guenter roeckguenter roeck711.48%125.00%
dirk eibachdirk eibach46.56%125.00%
Total61100.00%4100.00%


static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; int nr = attr->index; long val; int err; int temp; u8 reg; err = kstrtol(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); switch (nr) { case 2: reg = LM63_REG_REMOTE_TCRIT; if (data->remote_unsigned) temp = TEMP8U_TO_REG(val - data->temp2_offset); else temp = TEMP8_TO_REG(val - data->temp2_offset); break; case 1: reg = LM63_REG_LOCAL_HIGH; temp = TEMP8_TO_REG(val); break; default: /* lookup table */ reg = LM63_REG_LUT_TEMP(nr - 3); temp = lut_temp_to_reg(data, val); } data->temp8[nr] = temp; i2c_smbus_write_byte_data(client, reg, temp); mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare16982.04%440.00%
guenter roeckguenter roeck2914.08%330.00%
dirk eibachdirk eibach41.94%110.00%
ingo molnaringo molnar20.97%110.00%
yani ioannouyani ioannou20.97%110.00%
Total206100.00%10100.00%


static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); int nr = attr->index; int temp; if (!nr) { /* * Use unsigned temperature unless its value is zero. * If it is zero, use signed temperature. */ if (data->temp11u) temp = TEMP11_FROM_REG(data->temp11u); else temp = TEMP11_FROM_REG(data->temp11[nr]); } else { if (data->remote_unsigned && nr == 2) temp = TEMP11_FROM_REG((u16)data->temp11[nr]); else temp = TEMP11_FROM_REG(data->temp11[nr]); } return sprintf(buf, "%d\n", temp + data->temp2_offset); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare13394.33%250.00%
dirk eibachdirk eibach42.84%125.00%
yani ioannouyani ioannou42.84%125.00%
Total141100.00%4100.00%


static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { static const u8 reg[6] = { LM63_REG_REMOTE_LOW_MSB, LM63_REG_REMOTE_LOW_LSB, LM63_REG_REMOTE_HIGH_MSB, LM63_REG_REMOTE_HIGH_LSB, LM63_REG_REMOTE_OFFSET_MSB, LM63_REG_REMOTE_OFFSET_LSB, }; struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long val; int err; int nr = attr->index; err = kstrtol(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); if (data->remote_unsigned && nr == 2) data->temp11[nr] = TEMP11U_TO_REG(val - data->temp2_offset); else data->temp11[nr] = TEMP11_TO_REG(val - data->temp2_offset); i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2], data->temp11[nr] >> 8); i2c_smbus_write_byte_data(client, reg[(nr - 1) * 2 + 1], data->temp11[nr] & 0xff); mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare19186.43%450.00%
guenter roeckguenter roeck2611.76%225.00%
ingo molnaringo molnar20.90%112.50%
dirk eibachdirk eibach20.90%112.50%
Total221100.00%8100.00%

/* * Hysteresis register holds a relative value, while we want to present * an absolute to user-space */
static ssize_t show_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", temp8_from_reg(data, 2) + data->temp2_offset - TEMP8_FROM_REG(data->temp2_crit_hyst)); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare3766.07%150.00%
guenter roeckguenter roeck1933.93%150.00%
Total56100.00%2100.00%


static ssize_t show_lut_temp_hyst(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%d\n", lut_temp_from_reg(data, attr->index) + data->temp2_offset - TEMP8_FROM_REG(data->lut_temp_hyst)); }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck3754.41%150.00%
jean delvarejean delvare3145.59%150.00%
Total68100.00%2100.00%

/* * And now the other way around, user-space provides an absolute * hysteresis value and we have to store a relative one */
static ssize_t set_temp2_crit_hyst(struct device *dev, struct device_attribute *dummy, const char *buf, size_t count) { struct lm63_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; long val; int err; long hyst; err = kstrtol(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); hyst = temp8_from_reg(data, 2) + data->temp2_offset - val; i2c_smbus_write_byte_data(client, LM63_REG_REMOTE_TCRIT_HYST, HYST_TO_REG(hyst)); mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck9379.49%266.67%
jean delvarejean delvare2420.51%133.33%
Total117100.00%3100.00%

/* * Set conversion rate. * client->update_lock must be held when calling this function. */
static void lm63_set_convrate(struct lm63_data *data, unsigned int interval) { struct i2c_client *client = data->client; unsigned int update_interval; int i; /* Shift calculations to avoid rounding errors */ interval <<= 6; /* find the nearest update rate */ update_interval = (1 << (LM63_MAX_CONVRATE + 6)) * 1000 / data->max_convrate_hz; for (i = 0; i < LM63_MAX_CONVRATE; i++, update_interval >>= 1) if (interval >= update_interval * 3 / 4) break; i2c_smbus_write_byte_data(client, LM63_REG_CONVRATE, i); data->update_interval = UPDATE_INTERVAL(data->max_convrate_hz, i); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare7773.33%133.33%
guenter roeckguenter roeck2826.67%266.67%
Total105100.00%3100.00%


static ssize_t show_update_interval(struct device *dev, struct device_attribute *attr, char *buf) { struct lm63_data *data = dev_get_drvdata(dev); return sprintf(buf, "%u\n", data->update_interval); }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck2150.00%150.00%
jean delvarejean delvare2150.00%150.00%
Total42100.00%2100.00%


static ssize_t set_update_interval(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct lm63_data *data = dev_get_drvdata(dev); unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); lm63_set_convrate(data, clamp_val(val, 0, 100000)); mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare9096.77%133.33%
guenter roeckguenter roeck33.23%266.67%
Total93100.00%3100.00%


static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf) { struct lm63_data *data = dev_get_drvdata(dev); return sprintf(buf, data->trutherm ? "1\n" : "2\n"); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare4295.45%150.00%
guenter roeckguenter roeck24.55%150.00%
Total44100.00%2100.00%


static ssize_t set_type(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct lm63_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; unsigned long val; int ret; u8 reg; ret = kstrtoul(buf, 10, &val); if (ret < 0) return ret; if (val != 1 && val != 2) return -EINVAL; mutex_lock(&data->update_lock); data->trutherm = val == 1; reg = i2c_smbus_read_byte_data(client, LM96163_REG_TRUTHERM) & ~0x02; i2c_smbus_write_byte_data(client, LM96163_REG_TRUTHERM, reg | (data->trutherm ? 0x02 : 0x00)); data->valid = 0; mutex_unlock(&data->update_lock); return count; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck12682.89%266.67%
jean delvarejean delvare2617.11%133.33%
Total152100.00%3100.00%


static ssize_t show_alarms(struct device *dev, struct device_attribute *dummy, char *buf) { struct lm63_data *data = lm63_update_device(dev); return sprintf(buf, "%u\n", data->alarms); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare3890.48%266.67%
yani ioannouyani ioannou49.52%133.33%
Total42100.00%3100.00%


static ssize_t show_alarm(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct lm63_data *data = lm63_update_device(dev); int bitnr = attr->index; return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare65100.00%1100.00%
Total65100.00%1100.00%

static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan, set_fan, 1); static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 0); static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm1_enable, set_pwm1_enable); static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 1); static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 3); static SENSOR_DEVICE_ATTR(pwm1_auto_point1_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 3); static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 2); static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 4); static SENSOR_DEVICE_ATTR(pwm1_auto_point2_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 4); static SENSOR_DEVICE_ATTR(pwm1_auto_point3_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 3); static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 5); static SENSOR_DEVICE_ATTR(pwm1_auto_point3_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 5); static SENSOR_DEVICE_ATTR(pwm1_auto_point4_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 4); static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 6); static SENSOR_DEVICE_ATTR(pwm1_auto_point4_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 6); static SENSOR_DEVICE_ATTR(pwm1_auto_point5_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 5); static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 7); static SENSOR_DEVICE_ATTR(pwm1_auto_point5_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 7); static SENSOR_DEVICE_ATTR(pwm1_auto_point6_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 6); static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 8); static SENSOR_DEVICE_ATTR(pwm1_auto_point6_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 8); static SENSOR_DEVICE_ATTR(pwm1_auto_point7_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 7); static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 9); static SENSOR_DEVICE_ATTR(pwm1_auto_point7_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 9); static SENSOR_DEVICE_ATTR(pwm1_auto_point8_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 8); static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 10); static SENSOR_DEVICE_ATTR(pwm1_auto_point8_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 10); static SENSOR_DEVICE_ATTR(pwm1_auto_point9_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 9); static SENSOR_DEVICE_ATTR(pwm1_auto_point9_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 11); static SENSOR_DEVICE_ATTR(pwm1_auto_point9_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 11); static SENSOR_DEVICE_ATTR(pwm1_auto_point10_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 10); static SENSOR_DEVICE_ATTR(pwm1_auto_point10_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 12); static SENSOR_DEVICE_ATTR(pwm1_auto_point10_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 12); static SENSOR_DEVICE_ATTR(pwm1_auto_point11_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 11); static SENSOR_DEVICE_ATTR(pwm1_auto_point11_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 13); static SENSOR_DEVICE_ATTR(pwm1_auto_point11_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 13); static SENSOR_DEVICE_ATTR(pwm1_auto_point12_pwm, S_IWUSR | S_IRUGO, show_pwm1, set_pwm1, 12); static SENSOR_DEVICE_ATTR(pwm1_auto_point12_temp, S_IWUSR | S_IRUGO, show_lut_temp, set_temp8, 14); static SENSOR_DEVICE_ATTR(pwm1_auto_point12_temp_hyst, S_IRUGO, show_lut_temp_hyst, NULL, 14); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_local_temp8, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_local_temp8, set_temp8, 1); static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 0); static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 1); static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 2); static SENSOR_DEVICE_ATTR(temp2_offset, S_IWUSR | S_IRUGO, show_temp11, set_temp11, 3); static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_remote_temp8, set_temp8, 2); static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp2_crit_hyst, set_temp2_crit_hyst); static DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type); /* Individual alarm files */ static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, show_alarm, NULL, 0); static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); /* Raw alarm file for compatibility */ static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval, set_update_interval); static struct attribute *lm63_attributes[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &dev_attr_pwm1_enable.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point5_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point6_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point7_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point7_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point7_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point8_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point8_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point8_temp_hyst.dev_attr.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, &sensor_dev_attr_temp2_input.dev_attr.attr, &sensor_dev_attr_temp2_min.dev_attr.attr, &sensor_dev_attr_temp1_max.dev_attr.attr, &sensor_dev_attr_temp2_max.dev_attr.attr, &sensor_dev_attr_temp2_offset.dev_attr.attr, &sensor_dev_attr_temp2_crit.dev_attr.attr, &dev_attr_temp2_crit_hyst.attr, &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, &sensor_dev_attr_temp2_fault.dev_attr.attr, &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, &dev_attr_alarms.attr, &dev_attr_update_interval.attr, NULL }; static struct attribute *lm63_attributes_temp2_type[] = { &dev_attr_temp2_type.attr, NULL }; static const struct attribute_group lm63_group_temp2_type = { .attrs = lm63_attributes_temp2_type, }; static struct attribute *lm63_attributes_extra_lut[] = { &sensor_dev_attr_pwm1_auto_point9_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point9_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point9_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point10_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point10_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point10_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point11_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point11_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point11_temp_hyst.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point12_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point12_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point12_temp_hyst.dev_attr.attr, NULL }; static const struct attribute_group lm63_group_extra_lut = { .attrs = lm63_attributes_extra_lut, }; /* * On LM63, temp2_crit can be set only once, which should be job * of the bootloader. * On LM64, temp2_crit can always be set. * On LM96163, temp2_crit can be set if bit 1 of the configuration * register is true. */
static umode_t lm63_attribute_mode(struct kobject *kobj, struct attribute *attr, int index) { struct device *dev = container_of(kobj, struct device, kobj); struct lm63_data *data = dev_get_drvdata(dev); if (attr == &sensor_dev_attr_temp2_crit.dev_attr.attr && (data->kind == lm64 || (data->kind == lm96163 && (data->config & 0x02)))) return attr->mode | S_IWUSR; return attr->mode; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck91100.00%2100.00%
Total91100.00%2100.00%

static const struct attribute_group lm63_group = { .is_visible = lm63_attribute_mode, .attrs = lm63_attributes, }; static struct attribute *lm63_attributes_fan1[] = { &sensor_dev_attr_fan1_input.dev_attr.attr, &sensor_dev_attr_fan1_min.dev_attr.attr, &sensor_dev_attr_fan1_min_alarm.dev_attr.attr, NULL }; static const struct attribute_group lm63_group_fan1 = { .attrs = lm63_attributes_fan1, }; /* * Real code */ /* Return 0 if detection is successful, -ENODEV otherwise */
static int lm63_detect(struct i2c_client *client, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; u8 man_id, chip_id, reg_config1, reg_config2; u8 reg_alert_status, reg_alert_mask; int address = client->addr; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; man_id = i2c_smbus_read_byte_data(client, LM63_REG_MAN_ID); chip_id = i2c_smbus_read_byte_data(client, LM63_REG_CHIP_ID); reg_config1 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); reg_config2 = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG2); reg_alert_status = i2c_smbus_read_byte_data(client, LM63_REG_ALERT_STATUS); reg_alert_mask = i2c_smbus_read_byte_data(client, LM63_REG_ALERT_MASK); if (man_id != 0x01 /* National Semiconductor */ || (reg_config1 & 0x18) != 0x00 || (reg_config2 & 0xF8) != 0x00 || (reg_alert_status & 0x20) != 0x00 || (reg_alert_mask & 0xA4) != 0xA4) { dev_dbg(&adapter->dev, "Unsupported chip (man_id=0x%02X, chip_id=0x%02X)\n", man_id, chip_id); return -ENODEV; } if (chip_id == 0x41 && address == 0x4c) strlcpy(info->type, "lm63", I2C_NAME_SIZE); else if (chip_id == 0x51 && (address == 0x18 || address == 0x4e)) strlcpy(info->type, "lm64", I2C_NAME_SIZE); else if (chip_id == 0x49 && address == 0x4c) strlcpy(info->type, "lm96163", I2C_NAME_SIZE); else return -ENODEV; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare18171.83%466.67%
matthew garrettmatthew garrett4919.44%116.67%
guenter roeckguenter roeck228.73%116.67%
Total252100.00%6100.00%

/* * Ideally we shouldn't have to initialize anything, since the BIOS * should have taken care of everything */
static void lm63_init_client(struct lm63_data *data) { struct i2c_client *client = data->client; struct device *dev = &client->dev; u8 convrate; data->config = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG1); data->config_fan = i2c_smbus_read_byte_data(client, LM63_REG_CONFIG_FAN); /* Start converting if needed */ if (data->config & 0x40) { /* standby */ dev_dbg(dev, "Switching to operational mode\n"); data->config &= 0xA7; i2c_smbus_write_byte_data(client, LM63_REG_CONFIG1, data->config); } /* Tachometer is always enabled on LM64 */ if (data->kind == lm64) data->config |= 0x04; /* We may need pwm1_freq before ever updating the client data */ data->pwm1_freq = i2c_smbus_read_byte_data(client, LM63_REG_PWM_FREQ); if (data->pwm1_freq == 0) data->pwm1_freq = 1; switch (data->kind) { case lm63: case lm64: data->max_convrate_hz = LM63_MAX_CONVRATE_HZ; data->lut_size = 8; break; case lm96163: data->max_convrate_hz = LM96163_MAX_CONVRATE_HZ; data->lut_size = 12; data->trutherm = i2c_smbus_read_byte_data(client, LM96163_REG_TRUTHERM) & 0x02; break; } convrate = i2c_smbus_read_byte_data(client, LM63_REG_CONVRATE); if (unlikely(convrate > LM63_MAX_CONVRATE)) convrate = LM63_MAX_CONVRATE; data->update_interval = UPDATE_INTERVAL(data->max_convrate_hz, convrate); /* * For LM96163, check if high resolution PWM * and unsigned temperature format is enabled. */ if (data->kind == lm96163) { u8 config_enhanced = i2c_smbus_read_byte_data(client, LM96163_REG_CONFIG_ENHANCED); if (config_enhanced & 0x20) data->lut_temp_highres = true; if ((config_enhanced & 0x10) && !(data->config_fan & 0x08) && data->pwm1_freq == 8) data->pwm_highres = true; if (config_enhanced & 0x08) data->remote_unsigned = true; } /* Show some debug info about the LM63 configuration */ if (data->kind == lm63) dev_dbg(dev, "Alert/tach pin configured for %s\n", (data->config & 0x04) ? "tachometer input" : "alert output"); dev_dbg(dev, "PWM clock %s kHz, output frequency %u Hz\n", (data->config_fan & 0x08) ? "1.4" : "360", ((data->config_fan & 0x08) ? 700 : 180000) / data->pwm1_freq); dev_dbg(dev, "PWM output active %s, %s mode\n", (data->config_fan & 0x10) ? "low" : "high", (data->config_fan & 0x20) ? "manual" : "auto"); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare34688.04%650.00%
guenter roeckguenter roeck348.65%433.33%
dirk eibachdirk eibach102.54%18.33%
mark m. hoffmanmark m. hoffman30.76%18.33%
Total393100.00%12100.00%


static int lm63_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; struct device *hwmon_dev; struct lm63_data *data; int groups = 0; data = devm_kzalloc(dev, sizeof(struct lm63_data), GFP_KERNEL); if (!data) return -ENOMEM; data->client = client; mutex_init(&data->update_lock); /* Set the device type */ data->kind = id->driver_data; if (data->kind == lm64) data->temp2_offset = 16000; /* Initialize chip */ lm63_init_client(data); /* Register sysfs hooks */ data->groups[groups++] = &lm63_group; if (data->config & 0x04) /* tachometer enabled */ data->groups[groups++] = &lm63_group_fan1; if (data->kind == lm96163) { data->groups[groups++] = &lm63_group_temp2_type; data->groups[groups++] = &lm63_group_extra_lut; } hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, data, data->groups); return PTR_ERR_OR_ZERO(hwmon_dev); }

Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare9850.00%428.57%
guenter roeckguenter roeck9548.47%857.14%
mark m. hoffmanmark m. hoffman21.02%17.14%
tony jonestony jones10.51%17.14%
Total196100.00%14100.00%

/* * Driver data (common to all clients) */ static const struct i2c_device_id lm63_id[] = { { "lm63", lm63 }, { "lm64", lm64 }, { "lm96163", lm96163 }, { } }; MODULE_DEVICE_TABLE(i2c, lm63_id); static struct i2c_driver lm63_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "lm63", }, .probe = lm63_probe, .id_table = lm63_id, .detect = lm63_detect, .address_list = normal_i2c, }; module_i2c_driver(lm63_driver); MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); MODULE_DESCRIPTION("LM63 driver"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
jean delvarejean delvare468480.18%1742.50%
guenter roeckguenter roeck98216.81%1435.00%
dirk eibachdirk eibach711.22%12.50%
matthew garrettmatthew garrett611.04%12.50%
mark m. hoffmanmark m. hoffman150.26%25.00%
ingo molnaringo molnar110.19%12.50%
yani ioannouyani ioannou100.17%12.50%
alexey dobriyanalexey dobriyan60.10%12.50%
axel linaxel lin10.02%12.50%
tony jonestony jones10.02%12.50%
Total5842100.00%40100.00%
Directory: drivers/hwmon
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.