cregit-Linux how code gets into the kernel

Release 4.10 drivers/phy/phy-exynos4x12-usb2.c

Directory: drivers/phy
/*
 * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support
 *
 * Copyright (C) 2013 Samsung Electronics Co., Ltd.
 * Author: Kamil Debski <k.debski@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/delay.h>
#include <linux/io.h>
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include "phy-samsung-usb2.h"

/* Exynos USB PHY registers */

/* PHY power control */

#define EXYNOS_4x12_UPHYPWR			0x0


#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND	BIT(0)

#define EXYNOS_4x12_UPHYPWR_PHY0_PWR		BIT(3)

#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR	BIT(4)

#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP		BIT(5)

#define EXYNOS_4x12_UPHYPWR_PHY0 ( \
        EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \
        EXYNOS_4x12_UPHYPWR_PHY0_PWR | \
        EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \
        EXYNOS_4x12_UPHYPWR_PHY0_SLEEP)


#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND	BIT(6)

#define EXYNOS_4x12_UPHYPWR_PHY1_PWR		BIT(7)

#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP		BIT(8)

#define EXYNOS_4x12_UPHYPWR_PHY1 ( \
        EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \
        EXYNOS_4x12_UPHYPWR_PHY1_PWR | \
        EXYNOS_4x12_UPHYPWR_PHY1_SLEEP)


#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND	BIT(9)

#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR		BIT(10)

#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP		BIT(11)

#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \
        EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \
        EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \
        EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP)


#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND	BIT(12)

#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR		BIT(13)

#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP		BIT(14)

#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \
        EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \
        EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \
        EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP)

/* PHY clock control */

#define EXYNOS_4x12_UPHYCLK			0x4


#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK	(0x7 << 0)

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET	0

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6	(0x0 << 0)

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ	(0x1 << 0)

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ	(0x2 << 0)

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2	(0x3 << 0)

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ	(0x4 << 0)

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ	(0x5 << 0)

#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ	(0x7 << 0)


#define EXYNOS_3250_UPHYCLK_REFCLKSEL		(0x2 << 8)


#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP	BIT(3)

#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON	BIT(4)

#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON	BIT(7)


#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK	(0x7f << 10)

#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET  10

#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ	(0x24 << 10)

#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ	(0x1c << 10)

#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ	(0x1a << 10)

#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2	(0x15 << 10)

#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ	(0x14 << 10)

/* PHY reset control */

#define EXYNOS_4x12_UPHYRST			0x8


#define EXYNOS_4x12_URSTCON_PHY0		BIT(0)

#define EXYNOS_4x12_URSTCON_OTG_HLINK		BIT(1)

#define EXYNOS_4x12_URSTCON_OTG_PHYLINK		BIT(2)

#define EXYNOS_4x12_URSTCON_HOST_PHY		BIT(3)
/* The following bit defines are presented in the
 * order taken from the Exynos4412 reference manual.
 *
 * During experiments with the hardware and debugging
 * it was determined that the hardware behaves contrary
 * to the manual.
 *
 * The following bit values were chaned accordingly to the
 * results of real hardware experiments.
 */

#define EXYNOS_4x12_URSTCON_PHY1		BIT(4)

#define EXYNOS_4x12_URSTCON_HSIC0		BIT(6)

#define EXYNOS_4x12_URSTCON_HSIC1		BIT(5)

#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL	BIT(7)

#define EXYNOS_4x12_URSTCON_HOST_LINK_P0	BIT(10)

#define EXYNOS_4x12_URSTCON_HOST_LINK_P1	BIT(9)

#define EXYNOS_4x12_URSTCON_HOST_LINK_P2	BIT(8)

/* Isolation, configured in the power management unit */

#define EXYNOS_4x12_USB_ISOL_OFFSET		0x704

#define EXYNOS_4x12_USB_ISOL_OTG		BIT(0)

#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET	0x708

#define EXYNOS_4x12_USB_ISOL_HSIC0		BIT(0)

#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET	0x70c

#define EXYNOS_4x12_USB_ISOL_HSIC1		BIT(0)

/* Mode switching SUB Device <-> Host */

#define EXYNOS_4x12_MODE_SWITCH_OFFSET		0x21c

#define EXYNOS_4x12_MODE_SWITCH_MASK		1

#define EXYNOS_4x12_MODE_SWITCH_DEVICE		0

#define EXYNOS_4x12_MODE_SWITCH_HOST		1


enum exynos4x12_phy_id {
	
EXYNOS4x12_DEVICE,
	
EXYNOS4x12_HOST,
	
EXYNOS4x12_HSIC0,
	
EXYNOS4x12_HSIC1,
	
EXYNOS4x12_NUM_PHYS,
};

/*
 * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that
 * can be written to the phy register.
 */

static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg) { /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */ switch (rate) { case 9600 * KHZ: *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6; break; case 10 * MHZ: *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ; break; case 12 * MHZ: *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ; break; case 19200 * KHZ: *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2; break; case 20 * MHZ: *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ; break; case 24 * MHZ: *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ; break; case 50 * MHZ: *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ; break; default: return -EINVAL; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski106100.00%1100.00%
Total106100.00%1100.00%


static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on) { struct samsung_usb2_phy_driver *drv = inst->drv; u32 offset; u32 mask; switch (inst->cfg->id) { case EXYNOS4x12_DEVICE: case EXYNOS4x12_HOST: offset = EXYNOS_4x12_USB_ISOL_OFFSET; mask = EXYNOS_4x12_USB_ISOL_OTG; break; case EXYNOS4x12_HSIC0: offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET; mask = EXYNOS_4x12_USB_ISOL_HSIC0; break; case EXYNOS4x12_HSIC1: offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET; mask = EXYNOS_4x12_USB_ISOL_HSIC1; break; default: return; } regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); }

Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski97100.00%1100.00%
Total97100.00%1100.00%


static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst) { struct samsung_usb2_phy_driver *drv = inst->drv; u32 clk; clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK); clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK; if (drv->cfg->has_refclk_sel) clk = EXYNOS_3250_UPHYCLK_REFCLKSEL; clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET; clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON; writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK); }

Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski6283.78%266.67%
marek szyprowskimarek szyprowski1216.22%133.33%
Total74100.00%3100.00%


static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) { struct samsung_usb2_phy_driver *drv = inst->drv; u32 rstbits = 0; u32 phypwr = 0; u32 rst; u32 pwr; switch (inst->cfg->id) { case EXYNOS4x12_DEVICE: phypwr = EXYNOS_4x12_UPHYPWR_PHY0; rstbits = EXYNOS_4x12_URSTCON_PHY0; break; case EXYNOS4x12_HOST: phypwr = EXYNOS_4x12_UPHYPWR_PHY1; rstbits = EXYNOS_4x12_URSTCON_HOST_PHY | EXYNOS_4x12_URSTCON_PHY1 | EXYNOS_4x12_URSTCON_HOST_LINK_P0; break; case EXYNOS4x12_HSIC0: phypwr = EXYNOS_4x12_UPHYPWR_HSIC0; rstbits = EXYNOS_4x12_URSTCON_HSIC0 | EXYNOS_4x12_URSTCON_HOST_LINK_P1; break; case EXYNOS4x12_HSIC1: phypwr = EXYNOS_4x12_UPHYPWR_HSIC1; rstbits = EXYNOS_4x12_URSTCON_HSIC1 | EXYNOS_4x12_URSTCON_HOST_LINK_P1; break; } if (on) { pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); pwr &= ~phypwr; writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST); rst |= rstbits; writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); udelay(10); rst &= ~rstbits; writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); /* The following delay is necessary for the reset sequence to be * completed */ udelay(80); } else { pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); pwr |= phypwr; writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); } }

Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski220100.00%2100.00%
Total220100.00%2100.00%


static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst) { if (inst->int_cnt++ > 0) return; exynos4x12_setup_clk(inst); exynos4x12_isol(inst, 0); exynos4x12_phy_pwr(inst, 1); }

Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski40100.00%1100.00%
Total40100.00%1100.00%


static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst) { struct samsung_usb2_phy_driver *drv = inst->drv; if (inst->ext_cnt++ > 0) return 0; if (inst->cfg->id == EXYNOS4x12_HOST) { regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, EXYNOS_4x12_MODE_SWITCH_MASK, EXYNOS_4x12_MODE_SWITCH_HOST); exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); } if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, EXYNOS_4x12_MODE_SWITCH_MASK, EXYNOS_4x12_MODE_SWITCH_DEVICE); if (inst->cfg->id == EXYNOS4x12_HSIC0 || inst->cfg->id == EXYNOS4x12_HSIC1) { exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]); exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]); } exynos4x12_power_on_int(inst); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski14195.92%266.67%
marek szyprowskimarek szyprowski64.08%133.33%
Total147100.00%3100.00%


static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst) { if (inst->int_cnt-- > 1) return; exynos4x12_isol(inst, 1); exynos4x12_phy_pwr(inst, 0); }

Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski35100.00%2100.00%
Total35100.00%2100.00%


static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst) { struct samsung_usb2_phy_driver *drv = inst->drv; if (inst->ext_cnt-- > 1) return 0; if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch) regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET, EXYNOS_4x12_MODE_SWITCH_MASK, EXYNOS_4x12_MODE_SWITCH_HOST); if (inst->cfg->id == EXYNOS4x12_HOST) exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]); if (inst->cfg->id == EXYNOS4x12_HSIC0 || inst->cfg->id == EXYNOS4x12_HSIC1) { exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]); exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]); } exynos4x12_power_off_int(inst); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski12695.45%266.67%
marek szyprowskimarek szyprowski64.55%133.33%
Total132100.00%3100.00%

static const struct samsung_usb2_common_phy exynos4x12_phys[] = { { .label = "device", .id = EXYNOS4x12_DEVICE, .power_on = exynos4x12_power_on, .power_off = exynos4x12_power_off, }, { .label = "host", .id = EXYNOS4x12_HOST, .power_on = exynos4x12_power_on, .power_off = exynos4x12_power_off, }, { .label = "hsic0", .id = EXYNOS4x12_HSIC0, .power_on = exynos4x12_power_on, .power_off = exynos4x12_power_off, }, { .label = "hsic1", .id = EXYNOS4x12_HSIC1, .power_on = exynos4x12_power_on, .power_off = exynos4x12_power_off, }, }; const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = { .has_refclk_sel = 1, .num_phys = 1, .phys = exynos4x12_phys, .rate_to_clk = exynos4x12_rate_to_clk, }; const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { .has_mode_switch = 1, .num_phys = EXYNOS4x12_NUM_PHYS, .phys = exynos4x12_phys, .rate_to_clk = exynos4x12_rate_to_clk, };

Overall Contributors

PersonTokensPropCommitsCommitProp
kamil debskikamil debski122995.72%266.67%
marek szyprowskimarek szyprowski554.28%133.33%
Total1284100.00%3100.00%
Directory: drivers/phy
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.