Release 4.10 drivers/regulator/lp8788-ldo.c

Directory: drivers/regulator
/*
 * TI LP8788 MFD - ldo regulator driver
 *
 * Copyright 2012 Texas Instruments
 *
 * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/gpio.h>
#include <linux/mfd/lp8788.h>

/* register address */

#define LP8788_EN_LDO_A			0x0D	
/* DLDO 1 ~ 8 */

#define LP8788_EN_LDO_B			0x0E	
/* DLDO 9 ~ 12, ALDO 1 ~ 4 */

#define LP8788_EN_LDO_C			0x0F	
/* ALDO 5 ~ 10 */

#define LP8788_EN_SEL			0x10

#define LP8788_DLDO1_VOUT		0x2E

#define LP8788_DLDO2_VOUT		0x2F

#define LP8788_DLDO3_VOUT		0x30

#define LP8788_DLDO4_VOUT		0x31

#define LP8788_DLDO5_VOUT		0x32

#define LP8788_DLDO6_VOUT		0x33

#define LP8788_DLDO7_VOUT		0x34

#define LP8788_DLDO8_VOUT		0x35

#define LP8788_DLDO9_VOUT		0x36

#define LP8788_DLDO10_VOUT		0x37

#define LP8788_DLDO11_VOUT		0x38

#define LP8788_DLDO12_VOUT		0x39

#define LP8788_ALDO1_VOUT		0x3A

#define LP8788_ALDO2_VOUT		0x3B

#define LP8788_ALDO3_VOUT		0x3C

#define LP8788_ALDO4_VOUT		0x3D

#define LP8788_ALDO5_VOUT		0x3E

#define LP8788_ALDO6_VOUT		0x3F

#define LP8788_ALDO7_VOUT		0x40

#define LP8788_ALDO8_VOUT		0x41

#define LP8788_ALDO9_VOUT		0x42

#define LP8788_ALDO10_VOUT		0x43

#define LP8788_DLDO1_TIMESTEP		0x44

/* mask/shift bits */

#define LP8788_EN_DLDO1_M		BIT(0)	
/* Addr 0Dh ~ 0Fh */

#define LP8788_EN_DLDO2_M		BIT(1)

#define LP8788_EN_DLDO3_M		BIT(2)

#define LP8788_EN_DLDO4_M		BIT(3)

#define LP8788_EN_DLDO5_M		BIT(4)

#define LP8788_EN_DLDO6_M		BIT(5)

#define LP8788_EN_DLDO7_M		BIT(6)

#define LP8788_EN_DLDO8_M		BIT(7)

#define LP8788_EN_DLDO9_M		BIT(0)

#define LP8788_EN_DLDO10_M		BIT(1)

#define LP8788_EN_DLDO11_M		BIT(2)

#define LP8788_EN_DLDO12_M		BIT(3)

#define LP8788_EN_ALDO1_M		BIT(4)

#define LP8788_EN_ALDO2_M		BIT(5)

#define LP8788_EN_ALDO3_M		BIT(6)

#define LP8788_EN_ALDO4_M		BIT(7)

#define LP8788_EN_ALDO5_M		BIT(0)

#define LP8788_EN_ALDO6_M		BIT(1)

#define LP8788_EN_ALDO7_M		BIT(2)

#define LP8788_EN_ALDO8_M		BIT(3)

#define LP8788_EN_ALDO9_M		BIT(4)

#define LP8788_EN_ALDO10_M		BIT(5)

#define LP8788_EN_SEL_DLDO911_M		BIT(0)	
/* Addr 10h */

#define LP8788_EN_SEL_DLDO7_M		BIT(1)

#define LP8788_EN_SEL_ALDO7_M		BIT(2)

#define LP8788_EN_SEL_ALDO5_M		BIT(3)

#define LP8788_EN_SEL_ALDO234_M		BIT(4)

#define LP8788_EN_SEL_ALDO1_M		BIT(5)

#define LP8788_VOUT_5BIT_M		0x1F	
/* Addr 2Eh ~ 43h */

#define LP8788_VOUT_4BIT_M		0x0F

#define LP8788_VOUT_3BIT_M		0x07

#define LP8788_VOUT_1BIT_M		0x01

#define LP8788_STARTUP_TIME_M		0xF8	
/* Addr 44h ~ 59h */

#define LP8788_STARTUP_TIME_S		3


#define ENABLE_TIME_USEC		32

#define ENABLE				GPIOF_OUT_INIT_HIGH

#define DISABLE				GPIOF_OUT_INIT_LOW


enum lp8788_ldo_id {
	
DLDO1,
	
DLDO2,
	
DLDO3,
	
DLDO4,
	
DLDO5,
	
DLDO6,
	
DLDO7,
	
DLDO8,
	
DLDO9,
	
DLDO10,
	
DLDO11,
	
DLDO12,
	
ALDO1,
	
ALDO2,
	
ALDO3,
	
ALDO4,
	
ALDO5,
	
ALDO6,
	
ALDO7,
	
ALDO8,
	
ALDO9,
	
ALDO10,
};


struct lp8788_ldo {
	
struct lp8788 *lp;
	
struct regulator_desc *desc;
	
struct regulator_dev *regulator;
	
struct lp8788_ldo_enable_pin *en_pin;
};

/* DLDO 1, 2, 3, 9 voltage table */

static const int lp8788_dldo1239_vtbl[] = {
	1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
	2600000, 2700000, 2800000, 2900000, 3000000, 2850000, 2850000, 2850000,
	2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
	2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
};

/* DLDO 4 voltage table */

static const int lp8788_dldo4_vtbl[] = { 1800000, 3000000 };

/* DLDO 5, 7, 8 and ALDO 6 voltage table */

static const int lp8788_dldo578_aldo6_vtbl[] = {
	1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
	2600000, 2700000, 2800000, 2900000, 3000000, 3000000, 3000000, 3000000,
};

/* DLDO 6 voltage table */

static const int lp8788_dldo6_vtbl[] = {
	3000000, 3100000, 3200000, 3300000, 3400000, 3500000, 3600000, 3600000,
};

/* DLDO 10, 11 voltage table */

static const int lp8788_dldo1011_vtbl[] = {
	1100000, 1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000,
	1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000, 1500000,
};

/* ALDO 1 voltage table */

static const int lp8788_aldo1_vtbl[] = { 1800000, 2850000 };

/* ALDO 7 voltage table */

static const int lp8788_aldo7_vtbl[] = {
	1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1800000,
};



static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
{
	struct lp8788_ldo *ldo = rdev_get_drvdata(rdev);
	enum lp8788_ldo_id id = rdev_get_id(rdev);
	u8 val, addr = LP8788_DLDO1_TIMESTEP + id;

	if (lp8788_read_byte(ldo->lp, addr, &val))
		return -EINVAL;

	val = (val & LP8788_STARTUP_TIME_M) >> LP8788_STARTUP_TIME_S;

	return ENABLE_TIME_USEC * val;
}

Contributors
Person Tokens Prop Commits CommitProp
kim milo kim milo 72 100.00% 1 100.00%
Total 72 100.00% 1 100.00%


static const struct regulator_ops lp8788_ldo_voltage_table_ops = {
	.list_voltage = regulator_list_voltage_table,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,
	.is_enabled = regulator_is_enabled_regmap,
	.enable_time = lp8788_ldo_enable_time,
};


static const struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
	.list_voltage = regulator_list_voltage_linear,
	.enable = regulator_enable_regmap,
	.disable = regulator_disable_regmap,
	.is_enabled = regulator_is_enabled_regmap,
	.enable_time = lp8788_ldo_enable_time,
};


static struct regulator_desc lp8788_dldo_desc[] = {
	{
		.name = "dldo1",
		.id = DLDO1,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
		.volt_table = lp8788_dldo1239_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO1_VOUT,
		.vsel_mask = LP8788_VOUT_5BIT_M,
		.enable_reg = LP8788_EN_LDO_A,
		.enable_mask = LP8788_EN_DLDO1_M,
        },
	{
		.name = "dldo2",
		.id = DLDO2,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
		.volt_table = lp8788_dldo1239_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO2_VOUT,
		.vsel_mask = LP8788_VOUT_5BIT_M,
		.enable_reg = LP8788_EN_LDO_A,
		.enable_mask = LP8788_EN_DLDO2_M,
        },
	{
		.name = "dldo3",
		.id = DLDO3,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
		.volt_table = lp8788_dldo1239_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO3_VOUT,
		.vsel_mask = LP8788_VOUT_5BIT_M,
		.enable_reg = LP8788_EN_LDO_A,
		.enable_mask = LP8788_EN_DLDO3_M,
        },
	{
		.name = "dldo4",
		.id = DLDO4,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo4_vtbl),
		.volt_table = lp8788_dldo4_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO4_VOUT,
		.vsel_mask = LP8788_VOUT_1BIT_M,
		.enable_reg = LP8788_EN_LDO_A,
		.enable_mask = LP8788_EN_DLDO4_M,
        },
	{
		.name = "dldo5",
		.id = DLDO5,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
		.volt_table = lp8788_dldo578_aldo6_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO5_VOUT,
		.vsel_mask = LP8788_VOUT_4BIT_M,
		.enable_reg = LP8788_EN_LDO_A,
		.enable_mask = LP8788_EN_DLDO5_M,
        },
	{
		.name = "dldo6",
		.id = DLDO6,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo6_vtbl),
		.volt_table = lp8788_dldo6_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO6_VOUT,
		.vsel_mask = LP8788_VOUT_3BIT_M,
		.enable_reg = LP8788_EN_LDO_A,
		.enable_mask = LP8788_EN_DLDO6_M,
        },
	{
		.name = "dldo7",
		.id = DLDO7,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
		.volt_table = lp8788_dldo578_aldo6_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO7_VOUT,
		.vsel_mask = LP8788_VOUT_4BIT_M,
		.enable_reg = LP8788_EN_LDO_A,
		.enable_mask = LP8788_EN_DLDO7_M,
        },
	{
		.name = "dldo8",
		.id = DLDO8,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
		.volt_table = lp8788_dldo578_aldo6_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO8_VOUT,
		.vsel_mask = LP8788_VOUT_4BIT_M,
		.enable_reg = LP8788_EN_LDO_A,
		.enable_mask = LP8788_EN_DLDO8_M,
        },
	{
		.name = "dldo9",
		.id = DLDO9,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo1239_vtbl),
		.volt_table = lp8788_dldo1239_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO9_VOUT,
		.vsel_mask = LP8788_VOUT_5BIT_M,
		.enable_reg = LP8788_EN_LDO_B,
		.enable_mask = LP8788_EN_DLDO9_M,
        },
	{
		.name = "dldo10",
		.id = DLDO10,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
		.volt_table = lp8788_dldo1011_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO10_VOUT,
		.vsel_mask = LP8788_VOUT_4BIT_M,
		.enable_reg = LP8788_EN_LDO_B,
		.enable_mask = LP8788_EN_DLDO10_M,
        },
	{
		.name = "dldo11",
		.id = DLDO11,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo1011_vtbl),
		.volt_table = lp8788_dldo1011_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_DLDO11_VOUT,
		.vsel_mask = LP8788_VOUT_4BIT_M,
		.enable_reg = LP8788_EN_LDO_B,
		.enable_mask = LP8788_EN_DLDO11_M,
        },
	{
		.name = "dldo12",
		.id = DLDO12,
		.ops = &lp8788_ldo_voltage_fixed_ops,
		.n_voltages = 1,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.enable_reg = LP8788_EN_LDO_B,
		.enable_mask = LP8788_EN_DLDO12_M,
		.min_uV = 2500000,
        },
};


static struct regulator_desc lp8788_aldo_desc[] = {
	{
		.name = "aldo1",
		.id = ALDO1,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_aldo1_vtbl),
		.volt_table = lp8788_aldo1_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_ALDO1_VOUT,
		.vsel_mask = LP8788_VOUT_1BIT_M,
		.enable_reg = LP8788_EN_LDO_B,
		.enable_mask = LP8788_EN_ALDO1_M,
        },
	{
		.name = "aldo2",
		.id = ALDO2,
		.ops = &lp8788_ldo_voltage_fixed_ops,
		.n_voltages = 1,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.enable_reg = LP8788_EN_LDO_B,
		.enable_mask = LP8788_EN_ALDO2_M,
		.min_uV = 2850000,
        },
	{
		.name = "aldo3",
		.id = ALDO3,
		.ops = &lp8788_ldo_voltage_fixed_ops,
		.n_voltages = 1,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.enable_reg = LP8788_EN_LDO_B,
		.enable_mask = LP8788_EN_ALDO3_M,
		.min_uV = 2850000,
        },
	{
		.name = "aldo4",
		.id = ALDO4,
		.ops = &lp8788_ldo_voltage_fixed_ops,
		.n_voltages = 1,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.enable_reg = LP8788_EN_LDO_B,
		.enable_mask = LP8788_EN_ALDO4_M,
		.min_uV = 2850000,
        },
	{
		.name = "aldo5",
		.id = ALDO5,
		.ops = &lp8788_ldo_voltage_fixed_ops,
		.n_voltages = 1,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.enable_reg = LP8788_EN_LDO_C,
		.enable_mask = LP8788_EN_ALDO5_M,
		.min_uV = 2850000,
        },
	{
		.name = "aldo6",
		.id = ALDO6,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_dldo578_aldo6_vtbl),
		.volt_table = lp8788_dldo578_aldo6_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_ALDO6_VOUT,
		.vsel_mask = LP8788_VOUT_4BIT_M,
		.enable_reg = LP8788_EN_LDO_C,
		.enable_mask = LP8788_EN_ALDO6_M,
        },
	{
		.name = "aldo7",
		.id = ALDO7,
		.ops = &lp8788_ldo_voltage_table_ops,
		.n_voltages = ARRAY_SIZE(lp8788_aldo7_vtbl),
		.volt_table = lp8788_aldo7_vtbl,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.vsel_reg = LP8788_ALDO7_VOUT,
		.vsel_mask = LP8788_VOUT_3BIT_M,
		.enable_reg = LP8788_EN_LDO_C,
		.enable_mask = LP8788_EN_ALDO7_M,
        },
	{
		.name = "aldo8",
		.id = ALDO8,
		.ops = &lp8788_ldo_voltage_fixed_ops,
		.n_voltages = 1,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.enable_reg = LP8788_EN_LDO_C,
		.enable_mask = LP8788_EN_ALDO8_M,
		.min_uV = 2500000,
        },
	{
		.name = "aldo9",
		.id = ALDO9,
		.ops = &lp8788_ldo_voltage_fixed_ops,
		.n_voltages = 1,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.enable_reg = LP8788_EN_LDO_C,
		.enable_mask = LP8788_EN_ALDO9_M,
		.min_uV = 2500000,
        },
	{
		.name = "aldo10",
		.id = ALDO10,
		.ops = &lp8788_ldo_voltage_fixed_ops,
		.n_voltages = 1,
		.type = REGULATOR_VOLTAGE,
		.owner = THIS_MODULE,
		.enable_reg = LP8788_EN_LDO_C,
		.enable_mask = LP8788_EN_ALDO10_M,
		.min_uV = 1100000,
        },
};



static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
					struct lp8788_ldo *ldo,
					enum lp8788_ldo_id id)
{
	struct lp8788 *lp = ldo->lp;
	struct lp8788_platform_data *pdata = lp->pdata;
	enum lp8788_ext_ldo_en_id enable_id;
	u8 en_mask[] = {
		[EN_ALDO1]   = LP8788_EN_SEL_ALDO1_M,
		[EN_ALDO234] = LP8788_EN_SEL_ALDO234_M,
		[EN_ALDO5]   = LP8788_EN_SEL_ALDO5_M,
		[EN_ALDO7]   = LP8788_EN_SEL_ALDO7_M,
		[EN_DLDO7]   = LP8788_EN_SEL_DLDO7_M,
		[EN_DLDO911] = LP8788_EN_SEL_DLDO911_M,
        };

	switch (id) {
	case DLDO7:
		enable_id = EN_DLDO7;
		break;
	case DLDO9:
	case DLDO11:
		enable_id = EN_DLDO911;
		break;
	case ALDO1:
		enable_id = EN_ALDO1;
		break;
	case ALDO2 ... ALDO4:
		enable_id = EN_ALDO234;
		break;
	case ALDO5:
		enable_id = EN_ALDO5;
		break;
	case ALDO7:
		enable_id = EN_ALDO7;
		break;
	default:
		return 0;
	}

	/* if no platform data for ldo pin, then set default enable mode */
	if (!pdata || !pdata->ldo_pin || !pdata->ldo_pin[enable_id])
		goto set_default_ldo_enable_mode;

	ldo->en_pin = pdata->ldo_pin[enable_id];
	return 0;

set_default_ldo_enable_mode:
	return lp8788_update_bits(lp, LP8788_EN_SEL, en_mask[enable_id], 0);
}

Contributors
Person Tokens Prop Commits CommitProp
kim milo kim milo 199 99.50% 3 75.00%
axel lin axel lin 1 0.50% 1 25.00%
Total 200 100.00% 4 100.00%



static int lp8788_dldo_probe(struct platform_device *pdev)
{
	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
	int id = pdev->id;
	struct lp8788_ldo *ldo;
	struct regulator_config cfg = { };
	struct regulator_dev *rdev;
	int ret;

	ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
	if (!ldo)
		return -ENOMEM;

	ldo->lp = lp;
	ret = lp8788_config_ldo_enable_mode(pdev, ldo, id);
	if (ret)
		return ret;

	if (ldo->en_pin) {
		cfg.ena_gpio = ldo->en_pin->gpio;
		cfg.ena_gpio_flags = ldo->en_pin->init_state;
	}

	cfg.dev = pdev->dev.parent;
	cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL;
	cfg.driver_data = ldo;
	cfg.regmap = lp->regmap;

	rdev = devm_regulator_register(&pdev->dev, &lp8788_dldo_desc[id], &cfg);
	if (IS_ERR(rdev)) {
		ret = PTR_ERR(rdev);
		dev_err(&pdev->dev, "DLDO%d regulator register err = %d\n",
				id + 1, ret);
		return ret;
	}

	ldo->regulator = rdev;
	platform_set_drvdata(pdev, ldo);

	return 0;
}

Contributors
Person Tokens Prop Commits CommitProp
kim milo kim milo 237 97.53% 4 80.00%
jingoo han jingoo han 6 2.47% 1 20.00%
Total 243 100.00% 5 100.00%


static struct platform_driver lp8788_dldo_driver = {
	.probe = lp8788_dldo_probe,
	.driver = {
		.name = LP8788_DEV_DLDO,
        },
};



static int lp8788_aldo_probe(struct platform_device *pdev)
{
	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
	int id = pdev->id;
	struct lp8788_ldo *ldo;
	struct regulator_config cfg = { };
	struct regulator_dev *rdev;
	int ret;

	ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL);
	if (!ldo)
		return -ENOMEM;

	ldo->lp = lp;
	ret = lp8788_config_ldo_enable_mode(pdev, ldo, id + ALDO1);
	if (ret)
		return ret;

	if (ldo->en_pin) {
		cfg.ena_gpio = ldo->en_pin->gpio;
		cfg.ena_gpio_flags = ldo->en_pin->init_state;
	}

	cfg.dev = pdev->dev.parent;
	cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL;
	cfg.driver_data = ldo;
	cfg.regmap = lp->regmap;

	rdev = devm_regulator_register(&pdev->dev, &lp8788_aldo_desc[id], &cfg);
	if (IS_ERR(rdev)) {
		ret = PTR_ERR(rdev);
		dev_err(&pdev->dev, "ALDO%d regulator register err = %d\n",
				id + 1, ret);
		return ret;
	}

	ldo->regulator = rdev;
	platform_set_drvdata(pdev, ldo);

	return 0;
}

Contributors
Person Tokens Prop Commits CommitProp
kim milo kim milo 237 96.73% 4 66.67%
jingoo han jingoo han 6 2.45% 1 16.67%
axel lin axel lin 2 0.82% 1 16.67%
Total 245 100.00% 6 100.00%


static struct platform_driver lp8788_aldo_driver = {
	.probe = lp8788_aldo_probe,
	.driver = {
		.name = LP8788_DEV_ALDO,
        },
};


static struct platform_driver * const drivers[] = {
	&lp8788_dldo_driver,
	&lp8788_aldo_driver,
};



static int __init lp8788_ldo_init(void)
{
	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
}
Contributors
Person Tokens Prop Commits CommitProp
kim milo kim milo 13 65.00% 1 50.00%
thierry reding thierry reding 7 35.00% 1 50.00%
Total 20 100.00% 2 100.00%


subsys_initcall(lp8788_ldo_init);



static void __exit lp8788_ldo_exit(void)
{
	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
}
Contributors
Person Tokens Prop Commits CommitProp
kim milo kim milo 13 68.42% 1 50.00%
thierry reding thierry reding 6 31.58% 1 50.00%
Total 19 100.00% 2 100.00%


module_exit(lp8788_ldo_exit);

MODULE_DESCRIPTION("TI LP8788 LDO Driver");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:lp8788-dldo");
MODULE_ALIAS("platform:lp8788-aldo");
Overall Contributors
Person Tokens Prop Commits CommitProp
kim milo kim milo 2686 95.42% 4 33.33%
axel lin axel lin 85 3.02% 4 33.33%
thierry reding thierry reding 29 1.03% 1 8.33%
jingoo han jingoo han 12 0.43% 1 8.33%
julia lawall julia lawall 2 0.07% 1 8.33%
mark brown mark brown 1 0.04% 1 8.33%
Total 2815 100.00% 12 100.00%
Directory: drivers/regulator

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
	Person	Tokens	Prop	Commits	CommitProp
kim milo	kim milo	72	100.00%	1	100.00%
	Total	72	100.00%	1	100.00%
cregit-Linux how code gets into the kernel

Release 4.10 drivers/regulator/lp8788-ldo.c

Contributors

Contributors

Contributors

Contributors

Contributors

Contributors

Overall Contributors
