Release 4.10 drivers/regulator/rn5t618-regulator.c

/*
 * Regulator driver for Ricoh RN5T618 PMIC
 *
 * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2 as published by the Free Software Foundation.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program. If not, see <http://www.gnu.org/licenses/>.
 */

#include <linux/mfd/rn5t618.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>


static struct regulator_ops rn5t618_reg_ops = {
	.enable			= regulator_enable_regmap,
	.disable		= regulator_disable_regmap,
	.is_enabled		= regulator_is_enabled_regmap,
	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
	.list_voltage		= regulator_list_voltage_linear,
};


#define REG(rid, ereg, emask, vreg, vmask, min, max, step)		\
	[RN5T618_##rid] = {                                             \
                .name           = #rid,                                 \
                .of_match       = of_match_ptr(#rid),                   \
                .regulators_node = of_match_ptr("regulators"),          \
                .id             = RN5T618_##rid,                        \
                .type           = REGULATOR_VOLTAGE,                    \
                .owner          = THIS_MODULE,                          \
                .ops            = &rn5t618_reg_ops,                     \
                .n_voltages     = ((max) - (min)) / (step) + 1,         \
                .min_uV         = (min),                                \
                .uV_step        = (step),                               \
                .enable_reg     = RN5T618_##ereg,                       \
                .enable_mask    = (emask),                              \
                .vsel_reg       = RN5T618_##vreg,                       \
                .vsel_mask      = (vmask),                              \
        }


static struct regulator_desc rn5t567_regulators[] = {
	/* DCDC */
	REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
	REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
	REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500),
	REG(DCDC4, DC4CTL, BIT(0), DC4DAC, 0xff, 600000, 3500000, 12500),
	/* LDO */
	REG(LDO1, LDOEN1, BIT(0), LDO1DAC, 0x7f, 900000, 3500000, 25000),
	REG(LDO2, LDOEN1, BIT(1), LDO2DAC, 0x7f, 900000, 3500000, 25000),
	REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000),
	REG(LDO4, LDOEN1, BIT(3), LDO4DAC, 0x7f, 900000, 3500000, 25000),
	REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
	/* LDO RTC */
	REG(LDORTC1, LDOEN2, BIT(4), LDORTCDAC, 0x7f, 1200000, 3500000, 25000),
	REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
};


static struct regulator_desc rn5t618_regulators[] = {
	/* DCDC */
	REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
	REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
	REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500),
	/* LDO */
	REG(LDO1, LDOEN1, BIT(0), LDO1DAC, 0x7f, 900000, 3500000, 25000),
	REG(LDO2, LDOEN1, BIT(1), LDO2DAC, 0x7f, 900000, 3500000, 25000),
	REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000),
	REG(LDO4, LDOEN1, BIT(3), LDO4DAC, 0x7f, 900000, 3500000, 25000),
	REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
	/* LDO RTC */
	REG(LDORTC1, LDOEN2, BIT(4), LDORTCDAC, 0x7f, 1700000, 3500000, 25000),
	REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
};



static int rn5t618_regulator_probe(struct platform_device *pdev)
{
	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
	struct regulator_config config = { };
	struct regulator_dev *rdev;
	struct regulator_desc *regulators;
	int i;

	switch (rn5t618->variant) {
	case RN5T567:
		regulators = rn5t567_regulators;
		break;
	case RN5T618:
		regulators = rn5t618_regulators;
		break;
	default:
		return -EINVAL;
	}

	config.dev = pdev->dev.parent;
	config.regmap = rn5t618->regmap;

	for (i = 0; i < RN5T618_REG_NUM; i++) {
		if (!regulators[i].name)
			continue;

		rdev = devm_regulator_register(&pdev->dev,
					       &regulators[i],
					       &config);
		if (IS_ERR(rdev)) {
			dev_err(&pdev->dev, "failed to register %s regulator\n",
				regulators[i].name);
			return PTR_ERR(rdev);
		}
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
beniamino galvani
beniamino galvani
111
64.91%
2
66.67%
stefan agner
stefan agner
60
35.09%
1
33.33%
Total
171
100.00%
3
100.00%


static struct platform_driver rn5t618_regulator_driver = {
	.probe = rn5t618_regulator_probe,
	.driver = {
		.name	= "rn5t618-regulator",
        },
};


module_platform_driver(rn5t618_regulator_driver);

MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
MODULE_DESCRIPTION("RN5T618 regulator driver");
MODULE_LICENSE("GPL v2");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
beniamino galvani
beniamino galvani
465
59.77%
2
66.67%
stefan agner
stefan agner
313
40.23%
1
33.33%
Total
778
100.00%
3
100.00%
Directory: drivers/regulator

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.