cregit-Linux how code gets into the kernel

Release 4.10 drivers/spi/spi-sc18is602.c

Directory: drivers/spi
/*
 * NXP SC18IS602/603 SPI driver
 *
 * Copyright (C) Guenter Roeck <linux@roeck-us.net>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/platform_data/sc18is602.h>
#include <linux/gpio/consumer.h>





enum chips { sc18is602, sc18is602b, sc18is603 };


#define SC18IS602_BUFSIZ		200

#define SC18IS602_CLOCK			7372000


#define SC18IS602_MODE_CPHA		BIT(2)

#define SC18IS602_MODE_CPOL		BIT(3)

#define SC18IS602_MODE_LSB_FIRST	BIT(5)

#define SC18IS602_MODE_CLOCK_DIV_4	0x0

#define SC18IS602_MODE_CLOCK_DIV_16	0x1

#define SC18IS602_MODE_CLOCK_DIV_64	0x2

#define SC18IS602_MODE_CLOCK_DIV_128	0x3


struct sc18is602 {
	
struct spi_master	*master;
	
struct device		*dev;
	
u8			ctrl;
	
u32			freq;
	
u32			speed;

	/* I2C data */
	
struct i2c_client	*client;
	
enum chips		id;
	
u8			buffer[SC18IS602_BUFSIZ + 1];
	
int			tlen;	/* Data queued for tx in buffer */
	
int			rindex;	/* Receive data index in buffer */

	
struct gpio_desc	*reset;
};


static int sc18is602_wait_ready(struct sc18is602 *hw, int len) { int i, err; int usecs = 1000000 * len / hw->speed + 1; u8 dummy[1]; for (i = 0; i < 10; i++) { err = i2c_master_recv(hw->client, dummy, 1); if (err >= 0) return 0; usleep_range(usecs, usecs * 2); } return -ETIMEDOUT; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck88100.00%1100.00%
Total88100.00%1100.00%


static int sc18is602_txrx(struct sc18is602 *hw, struct spi_message *msg, struct spi_transfer *t, bool do_transfer) { unsigned int len = t->len; int ret; if (hw->tlen == 0) { /* First byte (I2C command) is chip select */ hw->buffer[0] = 1 << msg->spi->chip_select; hw->tlen = 1; hw->rindex = 0; } /* * We can not immediately send data to the chip, since each I2C message * resembles a full SPI message (from CS active to CS inactive). * Enqueue messages up to the first read or until do_transfer is true. */ if (t->tx_buf) { memcpy(&hw->buffer[hw->tlen], t->tx_buf, len); hw->tlen += len; if (t->rx_buf) do_transfer = true; else hw->rindex = hw->tlen - 1; } else if (t->rx_buf) { /* * For receive-only transfers we still need to perform a dummy * write to receive data from the SPI chip. * Read data starts at the end of transmit data (minus 1 to * account for CS). */ hw->rindex = hw->tlen - 1; memset(&hw->buffer[hw->tlen], 0, len); hw->tlen += len; do_transfer = true; } if (do_transfer && hw->tlen > 1) { ret = sc18is602_wait_ready(hw, SC18IS602_BUFSIZ); if (ret < 0) return ret; ret = i2c_master_send(hw->client, hw->buffer, hw->tlen); if (ret < 0) return ret; if (ret != hw->tlen) return -EIO; if (t->rx_buf) { int rlen = hw->rindex + len; ret = sc18is602_wait_ready(hw, hw->tlen); if (ret < 0) return ret; ret = i2c_master_recv(hw->client, hw->buffer, rlen); if (ret < 0) return ret; if (ret != rlen) return -EIO; memcpy(t->rx_buf, &hw->buffer[hw->rindex], len); } hw->tlen = 0; } return len; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck342100.00%1100.00%
Total342100.00%1100.00%


static int sc18is602_setup_transfer(struct sc18is602 *hw, u32 hz, u8 mode) { u8 ctrl = 0; int ret; if (mode & SPI_CPHA) ctrl |= SC18IS602_MODE_CPHA; if (mode & SPI_CPOL) ctrl |= SC18IS602_MODE_CPOL; if (mode & SPI_LSB_FIRST) ctrl |= SC18IS602_MODE_LSB_FIRST; /* Find the closest clock speed */ if (hz >= hw->freq / 4) { ctrl |= SC18IS602_MODE_CLOCK_DIV_4; hw->speed = hw->freq / 4; } else if (hz >= hw->freq / 16) { ctrl |= SC18IS602_MODE_CLOCK_DIV_16; hw->speed = hw->freq / 16; } else if (hz >= hw->freq / 64) { ctrl |= SC18IS602_MODE_CLOCK_DIV_64; hw->speed = hw->freq / 64; } else { ctrl |= SC18IS602_MODE_CLOCK_DIV_128; hw->speed = hw->freq / 128; } /* * Don't do anything if the control value did not change. The initial * value of 0xff for hw->ctrl ensures that the correct mode will be set * with the first call to this function. */ if (ctrl == hw->ctrl) return 0; ret = i2c_smbus_write_byte_data(hw->client, 0xf0, ctrl); if (ret < 0) return ret; hw->ctrl = ctrl; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck196100.00%1100.00%
Total196100.00%1100.00%


static int sc18is602_check_transfer(struct spi_device *spi, struct spi_transfer *t, int tlen) { if (t && t->len + tlen > SC18IS602_BUFSIZ) return -EINVAL; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck38100.00%1100.00%
Total38100.00%1100.00%


static int sc18is602_transfer_one(struct spi_master *master, struct spi_message *m) { struct sc18is602 *hw = spi_master_get_devdata(master); struct spi_device *spi = m->spi; struct spi_transfer *t; int status = 0; hw->tlen = 0; list_for_each_entry(t, &m->transfers, transfer_list) { bool do_transfer; status = sc18is602_check_transfer(spi, t, hw->tlen); if (status < 0) break; status = sc18is602_setup_transfer(hw, t->speed_hz, spi->mode); if (status < 0) break; do_transfer = t->cs_change || list_is_last(&t->transfer_list, &m->transfers); if (t->len) { status = sc18is602_txrx(hw, m, t, do_transfer); if (status < 0) break; m->actual_length += status; } status = 0; if (t->delay_usecs) udelay(t->delay_usecs); } m->status = status; spi_finalize_current_message(master); return status; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck18798.42%150.00%
axel linaxel lin31.58%150.00%
Total190100.00%2100.00%


static int sc18is602_setup(struct spi_device *spi) { struct sc18is602 *hw = spi_master_get_devdata(spi->master); /* SC18IS602 does not support CS2 */ if (hw->id == sc18is602 && spi->chip_select == 2) return -ENXIO; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
axel linaxel lin45100.00%1100.00%
Total45100.00%1100.00%


static int sc18is602_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct device *dev = &client->dev; struct device_node *np = dev->of_node; struct sc18is602_platform_data *pdata = dev_get_platdata(dev); struct sc18is602 *hw; struct spi_master *master; int error; if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) return -EINVAL; master = spi_alloc_master(dev, sizeof(struct sc18is602)); if (!master) return -ENOMEM; hw = spi_master_get_devdata(master); i2c_set_clientdata(client, hw); /* assert reset and then release */ hw->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(hw->reset)) return PTR_ERR(hw->reset); gpiod_set_value_cansleep(hw->reset, 0); hw->master = master; hw->client = client; hw->dev = dev; hw->ctrl = 0xff; hw->id = id->driver_data; switch (hw->id) { case sc18is602: case sc18is602b: master->num_chipselect = 4; hw->freq = SC18IS602_CLOCK; break; case sc18is603: master->num_chipselect = 2; if (pdata) { hw->freq = pdata->clock_frequency; } else { const __be32 *val; int len; val = of_get_property(np, "clock-frequency", &len); if (val && len >= sizeof(__be32)) hw->freq = be32_to_cpup(val); } if (!hw->freq) hw->freq = SC18IS602_CLOCK; break; } master->bus_num = np ? -1 : client->adapter->nr; master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_LSB_FIRST; master->bits_per_word_mask = SPI_BPW_MASK(8); master->setup = sc18is602_setup; master->transfer_one_message = sc18is602_transfer_one; master->dev.of_node = np; master->min_speed_hz = hw->freq / 128; master->max_speed_hz = hw->freq / 4; error = devm_spi_register_master(dev, master); if (error) goto error_reg; return 0; error_reg: spi_master_put(master); return error; }

Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck31980.76%333.33%
phil reidphil reid4010.13%222.22%
axel linaxel lin338.35%333.33%
jingoo hanjingoo han30.76%111.11%
Total395100.00%9100.00%

static const struct i2c_device_id sc18is602_id[] = { { "sc18is602", sc18is602 }, { "sc18is602b", sc18is602b }, { "sc18is603", sc18is603 }, { } }; MODULE_DEVICE_TABLE(i2c, sc18is602_id); static struct i2c_driver sc18is602_driver = { .driver = { .name = "sc18is602", }, .probe = sc18is602_probe, .id_table = sc18is602_id, }; module_i2c_driver(sc18is602_driver); MODULE_DESCRIPTION("SC18IC602/603 SPI Master Driver"); MODULE_AUTHOR("Guenter Roeck"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
guenter roeckguenter roeck137691.19%330.00%
axel linaxel lin815.37%330.00%
phil reidphil reid483.18%220.00%
jingoo hanjingoo han30.20%110.00%
jarkko nikulajarkko nikula10.07%110.00%
Total1509100.00%10100.00%
Directory: drivers/spi
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.