cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-ixp4xx/include/mach/platform.h

/*
 * arch/arm/mach-ixp4xx/include/mach/platform.h
 *
 * Constants and functions that are useful to IXP4xx platform-specific code
 * and device drivers.
 *
 * Copyright (C) 2004 MontaVista Software, Inc.
 */

#ifndef __ASM_ARCH_HARDWARE_H__
#error "Do not include this directly, instead #include <mach/hardware.h>"
#endif

#ifndef __ASSEMBLY__

#include <linux/reboot.h>

#include <asm/types.h>

#ifndef	__ARMEB__

#define	REG_OFFSET	0
#else

#define	REG_OFFSET	3
#endif

/*
 * Expansion bus memory regions
 */

#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)

/*
 * The expansion bus on the IXP4xx can be configured for either 16 or
 * 32MB windows and the CS offset for each region changes based on the
 * current configuration. This means that we cannot simply hardcode
 * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
 * as setup by the bootloader to determine our window size.
 */
extern unsigned long ixp4xx_exp_bus_size;


#define	IXP4XX_EXP_BUS_BASE(region)\
		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))


#define IXP4XX_EXP_BUS_END(region)\
		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)

/* Those macros can be used to adjust timing and configure
 * other features for each region.
 */


#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)

#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)

#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)

#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)

#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)

#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)

#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)


#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)

#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)

#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)

#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)

#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)

#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)

#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)


#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00

#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01

#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02


#define IXP4XX_FLASH_WRITABLE	(0x2)

#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)

#define IXP4XX_FLASH_WRITE	(0xbcd23c42)

/*
 * Clock Speed Definitions.
 */

#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) 
/* 66MHzi APB BUS   */ 

#define IXP4XX_UART_XTAL        	14745600

/*
 * This structure provide a means for the board setup code
 * to give information to th pata_ixp4xx driver. It is
 * passed as platform_data.
 */

struct ixp4xx_pata_data {
	
volatile u32	*cs0_cfg;
	
volatile u32	*cs1_cfg;
	
unsigned long	cs0_bits;
	
unsigned long	cs1_bits;
	
void __iomem	*cs0;
	
void __iomem	*cs1;
};


#define IXP4XX_ETH_NPEA		0x00

#define IXP4XX_ETH_NPEB		0x10

#define IXP4XX_ETH_NPEC		0x20

/* Information about built-in Ethernet MAC interfaces */

struct eth_plat_info {
	
u8 phy;		/* MII PHY ID, 0 - 31 */
	
u8 rxq;		/* configurable, currently 0 - 31 only */
	
u8 txreadyq;
	
u8 hwaddr[6];
};

/* Information about built-in HSS (synchronous serial) interfaces */

struct hss_plat_info {
	
int (*set_clock)(int port, unsigned int clock_type);
	
int (*open)(int port, void *pdev,
		    void (*set_carrier_cb)(void *pdev, int carrier));
	
void (*close)(int port, void *pdev);
	
u8 txreadyq;
};

/*
 * Frequency of clock used for primary clocksource
 */
extern unsigned long ixp4xx_timer_freq;

/*
 * Functions used by platform-level setup code
 */
extern void ixp4xx_map_io(void);
extern void ixp4xx_init_early(void);
extern void ixp4xx_init_irq(void);
extern void ixp4xx_sys_init(void);
extern void ixp4xx_timer_init(void);
extern void ixp4xx_restart(enum reboot_mode, const char *);
extern void ixp4xx_pci_preinit(void);
struct pci_sys_data;
extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
extern struct pci_ops ixp4xx_ops;

#endif // __ASSEMBLY__


Overall Contributors

PersonTokensPropCommitsCommitProp
Alessandro Zummo13233.76%212.50%
Deepak Saxena11830.18%531.25%
Krzysztof Hałasa10025.58%16.25%
Russell King164.09%425.00%
Rob Herring71.79%16.25%
Michael-Luke Jones71.79%16.25%
Kevin Hilman61.53%16.25%
Robin Holt51.28%16.25%
Total391100.00%16100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.