/* * Copyright (C) 2011 Marvell International Ltd. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #ifndef __ASM_ARCH_REGS_USB_H #define __ASM_ARCH_REGS_USB_H #define PXA168_U2O_REGBASE (0xd4208000) #define PXA168_U2O_PHYBASE (0xd4207000) #define PXA168_U2H_REGBASE (0xd4209000) #define PXA168_U2H_PHYBASE (0xd4206000) #define MMP3_HSIC1_REGBASE (0xf0001000) #define MMP3_HSIC1_PHYBASE (0xf0001800) #define MMP3_HSIC2_REGBASE (0xf0002000) #define MMP3_HSIC2_PHYBASE (0xf0002800) #define MMP3_FSIC_REGBASE (0xf0003000) #define MMP3_FSIC_PHYBASE (0xf0003800) #define USB_REG_RANGE (0x1ff) #define USB_PHY_RANGE (0xff) /* registers */ #define U2x_CAPREGS_OFFSET 0x100 /* phy regs */ #define UTMI_REVISION 0x0 #define UTMI_CTRL 0x4 #define UTMI_PLL 0x8 #define UTMI_TX 0xc #define UTMI_RX 0x10 #define UTMI_IVREF 0x14 #define UTMI_T0 0x18 #define UTMI_T1 0x1c #define UTMI_T2 0x20 #define UTMI_T3 0x24 #define UTMI_T4 0x28 #define UTMI_T5 0x2c #define UTMI_RESERVE 0x30 #define UTMI_USB_INT 0x34 #define UTMI_DBG_CTL 0x38 #define UTMI_OTG_ADDON 0x3c /* For UTMICTRL Register */ #define UTMI_CTRL_USB_CLK_EN (1 << 31) /* pxa168 */ #define UTMI_CTRL_SUSPEND_SET1 (1 << 30) #define UTMI_CTRL_SUSPEND_SET2 (1 << 29) #define UTMI_CTRL_RXBUF_PDWN (1 << 24) #define UTMI_CTRL_TXBUF_PDWN (1 << 11) #define UTMI_CTRL_INPKT_DELAY_SHIFT 30 #define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT 28 #define UTMI_CTRL_PU_REF_SHIFT 20 #define UTMI_CTRL_ARC_PULLDN_SHIFT 12 #define UTMI_CTRL_PLL_PWR_UP_SHIFT 1 #define UTMI_CTRL_PWR_UP_SHIFT 0 /* For UTMI_PLL Register */ #define UTMI_PLL_PLLCALI12_SHIFT 29 #define UTMI_PLL_PLLCALI12_MASK (0x3 << 29) #define UTMI_PLL_PLLVDD18_SHIFT 27 #define UTMI_PLL_PLLVDD18_MASK (0x3 << 27) #define UTMI_PLL_PLLVDD12_SHIFT 25 #define UTMI_PLL_PLLVDD12_MASK (0x3 << 25) #define UTMI_PLL_CLK_BLK_EN_SHIFT 24 #define CLK_BLK_EN (0x1 << 24) #define PLL_READY (0x1 << 23) #define KVCO_EXT (0x1 << 22) #define VCOCAL_START (0x1 << 21) #define UTMI_PLL_KVCO_SHIFT 15 #define UTMI_PLL_KVCO_MASK (0x7 << 15) #define UTMI_PLL_ICP_SHIFT 12 #define UTMI_PLL_ICP_MASK (0x7 << 12) #define UTMI_PLL_FBDIV_SHIFT 4 #define UTMI_PLL_FBDIV_MASK (0xFF << 4) #define UTMI_PLL_REFDIV_SHIFT 0 #define UTMI_PLL_REFDIV_MASK (0xF << 0) /* For UTMI_TX Register */ #define UTMI_TX_REG_EXT_FS_RCAL_SHIFT 27 #define UTMI_TX_REG_EXT_FS_RCAL_MASK (0xf << 27) #define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT 26 #define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK (0x1 << 26) #define UTMI_TX_TXVDD12_SHIFT 22 #define UTMI_TX_TXVDD12_MASK (0x3 << 22) #define UTMI_TX_CK60_PHSEL_SHIFT 17 #define UTMI_TX_CK60_PHSEL_MASK (0xf << 17) #define UTMI_TX_IMPCAL_VTH_SHIFT 14 #define UTMI_TX_IMPCAL_VTH_MASK (0x7 << 14) #define REG_RCAL_START (0x1 << 12) #define UTMI_TX_LOW_VDD_EN_SHIFT 11 #define UTMI_TX_AMP_SHIFT 0 #define UTMI_TX_AMP_MASK (0x7 << 0) /* For UTMI_RX Register */ #define UTMI_REG_SQ_LENGTH_SHIFT 15 #define UTMI_REG_SQ_LENGTH_MASK (0x3 << 15) #define UTMI_RX_SQ_THRESH_SHIFT 4 #define UTMI_RX_SQ_THRESH_MASK (0xf << 4) #define UTMI_OTG_ADDON_OTG_ON (1 << 0) /* For MMP3 USB Phy */ #define USB2_PLL_REG0 0x4 #define USB2_PLL_REG1 0x8 #define USB2_TX_REG0 0x10 #define USB2_TX_REG1 0x14 #define USB2_TX_REG2 0x18 #define USB2_RX_REG0 0x20 #define USB2_RX_REG1 0x24 #define USB2_RX_REG2 0x28 #define USB2_ANA_REG0 0x30 #define USB2_ANA_REG1 0x34 #define USB2_ANA_REG2 0x38 #define USB2_DIG_REG0 0x3C #define USB2_DIG_REG1 0x40 #define USB2_DIG_REG2 0x44 #define USB2_DIG_REG3 0x48 #define USB2_TEST_REG0 0x4C #define USB2_TEST_REG1 0x50 #define USB2_TEST_REG2 0x54 #define USB2_CHARGER_REG0 0x58 #define USB2_OTG_REG0 0x5C #define USB2_PHY_MON0 0x60 #define USB2_RESETVE_REG0 0x64 #define USB2_ICID_REG0 0x78 #define USB2_ICID_REG1 0x7C /* USB2_PLL_REG0 */ /* This is for Ax stepping */ #define USB2_PLL_FBDIV_SHIFT_MMP3 0 #define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0) #define USB2_PLL_REFDIV_SHIFT_MMP3 8 #define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8) #define USB2_PLL_VDD12_SHIFT_MMP3 12 #define USB2_PLL_VDD18_SHIFT_MMP3 14 /* This is for B0 stepping */ #define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0 #define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9 #define USB2_PLL_VDD18_SHIFT_MMP3_B0 14 #define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF #define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00 #define USB2_PLL_CAL12_SHIFT_MMP3 0 #define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0) #define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2 #define USB2_PLL_KVCO_SHIFT_MMP3 4 #define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4) #define USB2_PLL_ICP_SHIFT_MMP3 8 #define USB2_PLL_ICP_MASK_MMP3 (0x7<<8) #define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12 #define USB2_PLL_PU_PLL_SHIFT_MMP3 13 #define USB2_PLL_PU_PLL_MASK (0x1 << 13) #define USB2_PLL_READY_MASK_MMP3 (0x1 << 15) /* USB2_TX_REG0 */ #define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8 #define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8) #define USB2_TX_RCAL_START_SHIFT_MMP3 13 /* USB2_TX_REG1 */ #define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0 #define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0) #define USB2_TX_AMP_SHIFT_MMP3 4 #define USB2_TX_AMP_MASK_MMP3 (0x7 << 4) #define USB2_TX_VDD12_SHIFT_MMP3 8 #define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8) /* USB2_TX_REG2 */ #define USB2_TX_DRV_SLEWRATE_SHIFT 10 /* USB2_RX_REG0 */ #define USB2_RX_SQ_THRESH_SHIFT_MMP3 4 #define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4) #define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10 #define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10) /* USB2_ANA_REG1*/ #define USB2_ANA_PU_ANA_SHIFT_MMP3 14 /* USB2_OTG_REG0 */ #define USB2_OTG_PU_OTG_SHIFT_MMP3 3 /* fsic registers */ #define FSIC_MISC 0x4 #define FSIC_INT 0x28 #define FSIC_CTRL 0x30 /* HSIC registers */ #define HSIC_PAD_CTRL 0x4 #define HSIC_CTRL 0x8 #define HSIC_CTRL_HSIC_ENABLE (1<<7) #define HSIC_CTRL_PLL_BYPASS (1<<4) #define TEST_GRP_0 0xc #define TEST_GRP_1 0x10 #define HSIC_INT 0x14 #define HSIC_INT_READY_INT_EN (1<<10) #define HSIC_INT_CONNECT_INT_EN (1<<9) #define HSIC_INT_CORE_INT_EN (1<<8) #define HSIC_INT_HS_READY (1<<2) #define HSIC_INT_CONNECT (1<<1) #define HSIC_INT_CORE (1<<0) #define HSIC_CONFIG 0x18 #define USBHSIC_CTRL 0x20 #define HSIC_USB_CTRL 0x28 #define HSIC_USB_CTRL_CLKEN 1 #define HSIC_USB_CLK_PHY 0x0 #define HSIC_USB_CLK_PMU 0x1 #endif /* __ASM_ARCH_PXA_U2O_H */Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Neil Zhang | 677 | 100.00% | 1 | 100.00% |
| Total | 677 | 100.00% | 1 | 100.00% |