cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-mvebu/kirkwood.c

/*
 * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
 *
 * arch/arm/mach-mvebu/kirkwood.c
 *
 * Flattened Device Tree board initialization
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <asm/hardware/cache-feroceon-l2.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "kirkwood.h"
#include "kirkwood-pm.h"
#include "common.h"


static struct resource kirkwood_cpufreq_resources[] = {
	[0] = {
		.start  = CPU_CONTROL_PHYS,
		.end    = CPU_CONTROL_PHYS + 3,
		.flags  = IORESOURCE_MEM,
        },
};


static struct platform_device kirkwood_cpufreq_device = {
	.name		= "kirkwood-cpufreq",
	.id		= -1,
	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
	.resource	= kirkwood_cpufreq_resources,
};


static void __init kirkwood_cpufreq_init(void) { platform_device_register(&kirkwood_cpufreq_device); }

Contributors

PersonTokensPropCommitsCommitProp
Andrew Lunn15100.00%1100.00%
Total15100.00%1100.00%

static struct resource kirkwood_cpuidle_resource[] = { { .flags = IORESOURCE_MEM, .start = DDR_OPERATION_BASE, .end = DDR_OPERATION_BASE + 3, }, }; static struct platform_device kirkwood_cpuidle = { .name = "kirkwood_cpuidle", .id = -1, .resource = kirkwood_cpuidle_resource, .num_resources = 1, };
static void __init kirkwood_cpuidle_init(void) { platform_device_register(&kirkwood_cpuidle); }

Contributors

PersonTokensPropCommitsCommitProp
Andrew Lunn15100.00%1100.00%
Total15100.00%1100.00%

#define MV643XX_ETH_MAC_ADDR_LOW 0x0414 #define MV643XX_ETH_MAC_ADDR_HIGH 0x0418
static void __init kirkwood_dt_eth_fixup(void) { struct device_node *np; /* * The ethernet interfaces forget the MAC address assigned by u-boot * if the clocks are turned off. Usually, u-boot on kirkwood boards * has no DT support to properly set local-mac-address property. * As a workaround, we get the MAC address from mv643xx_eth registers * and update the port device node if no valid MAC address is set. */ for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") { struct device_node *pnp = of_get_parent(np); struct clk *clk; struct property *pmac; void __iomem *io; u8 *macaddr; u32 reg; if (!pnp) continue; /* skip disabled nodes or nodes with valid MAC address*/ if (!of_device_is_available(pnp) || of_get_mac_address(np)) goto eth_fixup_skip; clk = of_clk_get(pnp, 0); if (IS_ERR(clk)) goto eth_fixup_skip; io = of_iomap(pnp, 0); if (!io) goto eth_fixup_no_map; /* ensure port clock is not gated to not hang CPU */ clk_prepare_enable(clk); /* store MAC address register contents in local-mac-address */ pr_err(FW_INFO "%s: local-mac-address is not set\n", np->full_name); pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL); if (!pmac) goto eth_fixup_no_mem; pmac->value = pmac + 1; pmac->length = 6; pmac->name = kstrdup("local-mac-address", GFP_KERNEL); if (!pmac->name) { kfree(pmac); goto eth_fixup_no_mem; } macaddr = pmac->value; reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH); macaddr[0] = (reg >> 24) & 0xff; macaddr[1] = (reg >> 16) & 0xff; macaddr[2] = (reg >> 8) & 0xff; macaddr[3] = reg & 0xff; reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW); macaddr[4] = (reg >> 8) & 0xff; macaddr[5] = reg & 0xff; of_update_property(np, pmac); eth_fixup_no_mem: iounmap(io); clk_disable_unprepare(clk); eth_fixup_no_map: clk_put(clk); eth_fixup_skip: of_node_put(pnp); } }

Contributors

PersonTokensPropCommitsCommitProp
Andrew Lunn325100.00%1100.00%
Total325100.00%1100.00%

/* * Disable propagation of mbus errors to the CPU local bus, as this * causes mbus errors (which can occur for example for PCI aborts) to * throw CPU aborts, which we're not set up to deal with. */
static void kirkwood_disable_mbus_error_propagation(void) { void __iomem *cpu_config; cpu_config = ioremap(CPU_CONFIG_PHYS, 4); writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config); }

Contributors

PersonTokensPropCommitsCommitProp
Andrew Lunn3497.14%150.00%
Ben Dooks12.86%150.00%
Total35100.00%2100.00%

static struct of_dev_auxdata auxdata[] __initdata = { OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000, "mvebu-audio", NULL), { /* sentinel */ } };
static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); #endif kirkwood_cpufreq_init(); kirkwood_cpuidle_init(); kirkwood_pm_init(); kirkwood_dt_eth_fixup(); of_platform_default_populate(NULL, auxdata, NULL); }

Contributors

PersonTokensPropCommitsCommitProp
Andrew Lunn4591.84%250.00%
Thomas Petazzoni36.12%125.00%
Kefeng Wang12.04%125.00%
Total49100.00%4100.00%

static const char * const kirkwood_dt_board_compat[] __initconst = { "marvell,kirkwood", NULL }; DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ .init_machine = kirkwood_dt_init, .restart = mvebu_restart, .dt_compat = kirkwood_dt_board_compat, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Andrew Lunn66799.11%450.00%
Thomas Petazzoni40.59%225.00%
Kefeng Wang10.15%112.50%
Ben Dooks10.15%112.50%
Total673100.00%8100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.