cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-omap1/board-palmz71.c

/*
 * linux/arch/arm/mach-omap1/board-palmz71.c
 *
 * Modified from board-generic.c
 *
 * Support for the Palm Zire71 PDA.
 *
 * Original version : Laurent Gonzalez
 *
 * Modified for zire71 : Marek Vasut
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/notifier.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/omapfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include "flash.h"
#include <mach/mux.h>
#include <linux/omap-dma.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>

#include <mach/hardware.h>
#include <mach/usb.h>

#include "common.h"


#define PALMZ71_USBDETECT_GPIO	0

#define PALMZ71_PENIRQ_GPIO	6

#define PALMZ71_MMC_WP_GPIO	8

#define PALMZ71_HDQ_GPIO 	11


#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)

#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)

#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)

#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)


static const unsigned int palmz71_keymap[] = {
	KEY(0, 0, KEY_F1),
	KEY(1, 0, KEY_F2),
	KEY(2, 0, KEY_F3),
	KEY(3, 0, KEY_F4),
	KEY(4, 0, KEY_POWER),
	KEY(0, 1, KEY_LEFT),
	KEY(1, 1, KEY_DOWN),
	KEY(2, 1, KEY_UP),
	KEY(3, 1, KEY_RIGHT),
	KEY(4, 1, KEY_ENTER),
	KEY(0, 2, KEY_CAMERA),
};


static const struct matrix_keymap_data palmz71_keymap_data = {
	.keymap		= palmz71_keymap,
	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
};


static struct omap_kp_platform_data palmz71_kp_data = {
	.rows	= 8,
	.cols	= 8,
	.keymap_data	= &palmz71_keymap_data,
	.rep	= true,
	.delay	= 80,
};


static struct resource palmz71_kp_resources[] = {
	[0] = {
		.start	= INT_KEYBOARD,
		.end	= INT_KEYBOARD,
		.flags	= IORESOURCE_IRQ,
        },
};


static struct platform_device palmz71_kp_device = {
	.name	= "omap-keypad",
	.id	= -1,
	.dev	= {
		.platform_data = &palmz71_kp_data,
        },
	.num_resources	= ARRAY_SIZE(palmz71_kp_resources),
	.resource	= palmz71_kp_resources,
};


static struct mtd_partition palmz71_rom_partitions[] = {
	/* PalmOS "Small ROM", contains the bootloader and the debugger */
	{
		.name		= "smallrom",
		.offset		= 0,
		.size		= 0xa000,
		.mask_flags	= MTD_WRITEABLE,
        },
	/* PalmOS "Big ROM", a filesystem with all the OS code and data */
	{
		.name	= "bigrom",
		.offset	= SZ_128K,
		/*
                 * 0x5f0000 bytes big in the multi-language ("EFIGS") version,
                 * 0x7b0000 bytes in the English-only ("enUS") version.
                 */
		.size		= 0x7b0000,
		.mask_flags	= MTD_WRITEABLE,
        },
};


static struct physmap_flash_data palmz71_rom_data = {
	.width		= 2,
	.set_vpp	= omap1_set_vpp,
	.parts		= palmz71_rom_partitions,
	.nr_parts	= ARRAY_SIZE(palmz71_rom_partitions),
};


static struct resource palmz71_rom_resource = {
	.start	= OMAP_CS0_PHYS,
	.end	= OMAP_CS0_PHYS + SZ_8M - 1,
	.flags	= IORESOURCE_MEM,
};


static struct platform_device palmz71_rom_device = {
	.name	= "physmap-flash",
	.id	= -1,
	.dev = {
		.platform_data = &palmz71_rom_data,
        },
	.num_resources	= 1,
	.resource	= &palmz71_rom_resource,
};


static struct platform_device palmz71_lcd_device = {
	.name	= "lcd_palmz71",
	.id	= -1,
};


static struct platform_device palmz71_spi_device = {
	.name	= "spi_palmz71",
	.id	= -1,
};


static struct omap_backlight_config palmz71_backlight_config = {
	.default_intensity	= 0xa0,
};


static struct platform_device palmz71_backlight_device = {
	.name	= "omap-bl",
	.id	= -1,
	.dev	= {
		.platform_data = &palmz71_backlight_config,
        },
};


static struct platform_device *devices[] __initdata = {
	&palmz71_rom_device,
	&palmz71_kp_device,
	&palmz71_lcd_device,
	&palmz71_spi_device,
	&palmz71_backlight_device,
};


static int palmz71_get_pendown_state(void) { return !gpio_get_value(PALMZ71_PENIRQ_GPIO); }

Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut1493.33%150.00%
David Brownell16.67%150.00%
Total15100.00%2100.00%

static const struct ads7846_platform_data palmz71_ts_info = { .model = 7846, .vref_delay_usecs = 100, /* internal, no capacitor */ .x_plate_ohms = 419, .y_plate_ohms = 486, .get_pendown_state = palmz71_get_pendown_state, }; static struct spi_board_info __initdata palmz71_boardinfo[] = { { /* MicroWire (bus 2) CS0 has an ads7846e */ .modalias = "ads7846", .platform_data = &palmz71_ts_info, .max_speed_hz = 120000 /* max sample rate at 3V */ * 26 /* command + data + overhead */, .bus_num = 2, .chip_select = 0, } }; static struct omap_usb_config palmz71_usb_config __initdata = { .register_dev = 1, /* Mini-B only receptacle */ .hmc_mode = 0, .pins[0] = 2, }; static struct omap_lcd_config palmz71_lcd_config __initdata = { .ctrl_name = "internal", };
static irqreturn_t palmz71_powercable(int irq, void *dev_id) { if (gpio_get_value(PALMZ71_USBDETECT_GPIO)) { printk(KERN_INFO "PM: Power cable connected\n"); irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), IRQ_TYPE_EDGE_FALLING); } else { printk(KERN_INFO "PM: Power cable disconnected\n"); irq_set_irq_type(gpio_to_irq(PALMZ71_USBDETECT_GPIO), IRQ_TYPE_EDGE_RISING); } return IRQ_HANDLED; }

Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut5388.33%120.00%
David Brownell35.00%240.00%
Dmitry Baryshkov23.33%120.00%
Thomas Gleixner23.33%120.00%
Total60100.00%5100.00%


static void __init omap_mpu_wdt_mode(int mode) { if (mode) omap_writew(0x8000, OMAP_WDT_TIMER_MODE); else { omap_writew(0x00f5, OMAP_WDT_TIMER_MODE); omap_writew(0x00a0, OMAP_WDT_TIMER_MODE); } }

Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut38100.00%1100.00%
Total38100.00%1100.00%


static void __init palmz71_gpio_setup(int early) { if (early) { /* Only set GPIO1 so we have a working serial */ gpio_direction_output(1, 1); } else { /* Set MMC/SD host WP pin as input */ if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) { printk(KERN_ERR "Could not reserve WP GPIO!\n"); return; } gpio_direction_input(PALMZ71_MMC_WP_GPIO); /* Monitor the Power-cable-connected signal */ if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) { printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); return; } gpio_direction_input(PALMZ71_USBDETECT_GPIO); if (request_irq(gpio_to_irq(PALMZ71_USBDETECT_GPIO), palmz71_powercable, 0, "palmz71-cable", NULL)) printk(KERN_ERR "IRQ request for power cable failed!\n"); palmz71_powercable(gpio_to_irq(PALMZ71_USBDETECT_GPIO), NULL); } }

Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut9584.07%114.29%
Jarkko Nikula108.85%114.29%
David Brownell54.42%342.86%
Paul Walmsley21.77%114.29%
Theodore Y. Ts'o10.88%114.29%
Total113100.00%7100.00%


static void __init omap_palmz71_init(void) { /* mux pins for uarts */ omap_cfg_reg(UART1_TX); omap_cfg_reg(UART1_RTS); omap_cfg_reg(UART2_TX); omap_cfg_reg(UART2_RTS); omap_cfg_reg(UART3_TX); omap_cfg_reg(UART3_RX); palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); platform_add_devices(devices, ARRAY_SIZE(devices)); palmz71_boardinfo[0].irq = gpio_to_irq(PALMZ71_PENIRQ_GPIO); spi_register_board_info(palmz71_boardinfo, ARRAY_SIZE(palmz71_boardinfo)); omap1_usb_init(&palmz71_usb_config); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); palmz71_gpio_setup(0); omapfb_set_lcd_config(&palmz71_lcd_config); }

Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut4741.59%114.29%
Janusz Krzysztofik3127.43%114.29%
Tarun Kanti DebBarma1210.62%114.29%
Jarkko Nikula119.73%114.29%
Tomi Valkeinen65.31%114.29%
Felipe Balbi54.42%114.29%
Tony Lindgren10.88%114.29%
Total113100.00%7100.00%

MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .atag_offset = 0x100, .map_io = omap15xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, .handle_irq = omap1_handle_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, .restart = omap1_restart, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut88379.55%12.86%
Janusz Krzysztofik756.76%25.71%
Tony Lindgren575.14%925.71%
Jarkko Nikula211.89%25.71%
Tarun Kanti DebBarma121.08%12.86%
Ladislav Michl90.81%12.86%
Tomi Valkeinen90.81%12.86%
David Brownell90.81%411.43%
Russell King80.72%25.71%
Felipe Balbi50.45%12.86%
Shawn Guo50.45%12.86%
Igor Grinberg30.27%12.86%
Thomas Gleixner20.18%12.86%
Paul Walmsley20.18%12.86%
Stephen Warren20.18%12.86%
Dmitry Baryshkov20.18%12.86%
Arnd Bergmann20.18%25.71%
Nico Pitre20.18%12.86%
Theodore Y. Ts'o10.09%12.86%
Eduardo Valentin10.09%12.86%
Total1110100.00%35100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.