Release 4.11 arch/arm/mach-omap2/omap-pm-noop.c
/*
* omap-pm-noop.c - OMAP power management interface - dummy version
*
* This code implements the OMAP power management interface to
* drivers, CPUIdle, CPUFreq, and DSP Bridge. It is strictly for
* debug/demonstration use, as it does nothing but printk() whenever a
* function is called (when DEBUG is defined, below)
*
* Copyright (C) 2008-2009 Texas Instruments, Inc.
* Copyright (C) 2008-2009 Nokia Corporation
* Paul Walmsley
*
* Interface developed by (in alphabetical order):
* Karthik Dasu, Tony Lindgren, Rajendra Nayak, Sakari Poussa, Veeramanikandan
* Raju, Anand Sawant, Igor Stoppa, Paul Walmsley, Richard Woodruff
*/
#undef DEBUG
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include "omap_device.h"
#include "omap-pm.h"
static bool off_mode_enabled;
static int dummy_context_loss_counter;
/*
* Device-driver-originated constraints (via board-*.c files)
*/
int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
}
if (t == -1)
pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n",
dev_name(dev));
else
pr_debug("OMAP PM: add max MPU wakeup latency constraint: dev %s, t = %ld usec\n",
dev_name(dev), t);
/*
* For current Linux, this needs to map the MPU to a
* powerdomain, then go through the list of current max lat
* constraints on the MPU and find the smallest. If
* the latency constraint has changed, the code should
* recompute the state to enter for the next powerdomain
* state.
*
* TI CDP code can call constraint_set here.
*/
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Paul Walmsley | 72 | 100.00% | 3 | 100.00% |
| Total | 72 | 100.00% | 3 | 100.00% |
int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
{
if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
agent_id != OCP_TARGET_AGENT)) {
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
}
if (r == 0)
pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n",
dev_name(dev), agent_id);
else
pr_debug("OMAP PM: add min bus tput constraint: dev %s for agent_id %d: rate %ld KiB\n",
dev_name(dev), agent_id, r);
/*
* This code should model the interconnect and compute the
* required clock frequency, convert that to a VDD2 OPP ID, then
* set the VDD2 OPP appropriately.
*
* TI CDP code can call constraint_set here on the VDD2 OPP.
*/
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Paul Walmsley | 84 | 100.00% | 3 | 100.00% |
| Total | 84 | 100.00% | 3 | 100.00% |
/*
* DSP Bridge-specific constraints
*/
/**
* omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled
*
* Intended for use only by OMAP PM core code to notify this layer
* that off mode has been enabled.
*/
void omap_pm_enable_off_mode(void)
{
off_mode_enabled = true;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Kevin Hilman | 11 | 100.00% | 1 | 100.00% |
| Total | 11 | 100.00% | 1 | 100.00% |
/**
* omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled
*
* Intended for use only by OMAP PM core code to notify this layer
* that off mode has been disabled.
*/
void omap_pm_disable_off_mode(void)
{
off_mode_enabled = false;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Kevin Hilman | 11 | 100.00% | 1 | 100.00% |
| Total | 11 | 100.00% | 1 | 100.00% |
/*
* Device context loss tracking
*/
#ifdef CONFIG_ARCH_OMAP2PLUS
int omap_pm_get_dev_context_loss_count(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
int count;
if (WARN_ON(!dev))
return -ENODEV;
if (dev->pm_domain == &omap_device_pm_domain) {
count = omap_device_get_context_loss_count(pdev);
} else {
WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
dev_name(dev));
count = dummy_context_loss_counter;
if (off_mode_enabled) {
count++;
/*
* Context loss count has to be a non-negative value.
* Clear the sign bit to get a value range from 0 to
* INT_MAX.
*/
count &= INT_MAX;
dummy_context_loss_counter = count;
}
}
pr_debug("OMAP PM: context loss count for dev %s = %d\n",
dev_name(dev), count);
return count;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Kevin Hilman | 60 | 57.14% | 3 | 60.00% |
| Paul Walmsley | 28 | 26.67% | 1 | 20.00% |
| Tomi Valkeinen | 17 | 16.19% | 1 | 20.00% |
| Total | 105 | 100.00% | 5 | 100.00% |
#else
int omap_pm_get_dev_context_loss_count(struct device *dev)
{
return dummy_context_loss_counter;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Kevin Hilman | 12 | 92.31% | 1 | 50.00% |
| Tomi Valkeinen | 1 | 7.69% | 1 | 50.00% |
| Total | 13 | 100.00% | 2 | 100.00% |
#endif
/* Should be called before clk framework init */
int __init omap_pm_if_early_init(void)
{
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Paul Walmsley | 10 | 90.91% | 1 | 50.00% |
| Kevin Hilman | 1 | 9.09% | 1 | 50.00% |
| Total | 11 | 100.00% | 2 | 100.00% |
/* Must be called after clock framework is initialized */
int __init omap_pm_if_init(void)
{
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Paul Walmsley | 11 | 100.00% | 1 | 100.00% |
| Total | 11 | 100.00% | 1 | 100.00% |
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Paul Walmsley | 225 | 62.15% | 3 | 33.33% |
| Kevin Hilman | 116 | 32.04% | 4 | 44.44% |
| Tomi Valkeinen | 19 | 5.25% | 1 | 11.11% |
| Tony Lindgren | 2 | 0.55% | 1 | 11.11% |
| Total | 362 | 100.00% | 9 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.