cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-omap2/prcm-common.h

#ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H

#define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H

/*
 * OMAP2/3 PRCM base and module definitions
 *
 * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
 * Copyright (C) 2007-2009 Nokia Corporation
 *
 * Written by Paul Walmsley
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/* Module offsets from both CM_BASE & PRM_BASE */

/*
 * Offsets that are the same on 24xx and 34xx
 *
 * Technically, in terms of the TRM, OCP_MOD is 34xx only; PLL_MOD is
 * CCR_MOD on 3430; and GFX_MOD only exists < 3430ES2.
 */

#define OCP_MOD						0x000

#define MPU_MOD						0x100

#define CORE_MOD					0x200

#define GFX_MOD						0x300

#define WKUP_MOD					0x400

#define PLL_MOD						0x500


/* Chip-specific module offsets */

#define OMAP24XX_GR_MOD					OCP_MOD

#define OMAP24XX_DSP_MOD				0x800


#define OMAP2430_MDM_MOD				0xc00

/* IVA2 module is < base on 3430 */

#define OMAP3430_IVA2_MOD				-0x800

#define OMAP3430ES2_SGX_MOD				GFX_MOD

#define OMAP3430_CCR_MOD				PLL_MOD

#define OMAP3430_DSS_MOD				0x600

#define OMAP3430_CAM_MOD				0x700

#define OMAP3430_PER_MOD				0x800

#define OMAP3430_EMU_MOD				0x900

#define OMAP3430_GR_MOD					0xa00

#define OMAP3430_NEON_MOD				0xb00

#define OMAP3430ES2_USBHOST_MOD				0xc00

/*
 * TI81XX PRM module offsets
 */

#define TI814X_PRM_DSP_MOD				0x0a00

#define TI814X_PRM_HDVICP_MOD				0x0c00

#define TI814X_PRM_ISP_MOD				0x0d00

#define TI814X_PRM_HDVPSS_MOD				0x0e00

#define TI814X_PRM_GFX_MOD				0x0f00


#define TI81XX_PRM_DEVICE_MOD			0x0000

#define TI816X_PRM_ACTIVE_MOD			0x0a00

#define TI81XX_PRM_DEFAULT_MOD			0x0b00

#define TI816X_PRM_IVAHD0_MOD			0x0c00

#define TI816X_PRM_IVAHD1_MOD			0x0d00

#define TI816X_PRM_IVAHD2_MOD			0x0e00

#define TI816X_PRM_SGX_MOD				0x0f00

#define TI81XX_PRM_ALWON_MOD			0x1800

/* 24XX register bits shared between CM & PRM registers */

/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */

#define OMAP2420_EN_MMC_SHIFT				26

#define OMAP2420_EN_MMC_MASK				(1 << 26)

#define OMAP24XX_EN_UART2_SHIFT				22

#define OMAP24XX_EN_UART2_MASK				(1 << 22)

#define OMAP24XX_EN_UART1_SHIFT				21

#define OMAP24XX_EN_UART1_MASK				(1 << 21)

#define OMAP24XX_EN_MCSPI2_SHIFT			18

#define OMAP24XX_EN_MCSPI2_MASK				(1 << 18)

#define OMAP24XX_EN_MCSPI1_SHIFT			17

#define OMAP24XX_EN_MCSPI1_MASK				(1 << 17)

#define OMAP24XX_EN_MCBSP2_SHIFT			16

#define OMAP24XX_EN_MCBSP2_MASK				(1 << 16)

#define OMAP24XX_EN_MCBSP1_SHIFT			15

#define OMAP24XX_EN_MCBSP1_MASK				(1 << 15)

#define OMAP24XX_EN_GPT12_SHIFT				14

#define OMAP24XX_EN_GPT12_MASK				(1 << 14)

#define OMAP24XX_EN_GPT11_SHIFT				13

#define OMAP24XX_EN_GPT11_MASK				(1 << 13)

#define OMAP24XX_EN_GPT10_SHIFT				12

#define OMAP24XX_EN_GPT10_MASK				(1 << 12)

#define OMAP24XX_EN_GPT9_SHIFT				11

#define OMAP24XX_EN_GPT9_MASK				(1 << 11)

#define OMAP24XX_EN_GPT8_SHIFT				10

#define OMAP24XX_EN_GPT8_MASK				(1 << 10)

#define OMAP24XX_EN_GPT7_SHIFT				9

#define OMAP24XX_EN_GPT7_MASK				(1 << 9)

#define OMAP24XX_EN_GPT6_SHIFT				8

#define OMAP24XX_EN_GPT6_MASK				(1 << 8)

#define OMAP24XX_EN_GPT5_SHIFT				7

#define OMAP24XX_EN_GPT5_MASK				(1 << 7)

#define OMAP24XX_EN_GPT4_SHIFT				6

#define OMAP24XX_EN_GPT4_MASK				(1 << 6)

#define OMAP24XX_EN_GPT3_SHIFT				5

#define OMAP24XX_EN_GPT3_MASK				(1 << 5)

#define OMAP24XX_EN_GPT2_SHIFT				4

#define OMAP24XX_EN_GPT2_MASK				(1 << 4)

#define OMAP2420_EN_VLYNQ_SHIFT				3

#define OMAP2420_EN_VLYNQ_MASK				(1 << 3)

/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */

#define OMAP2430_EN_GPIO5_SHIFT				10

#define OMAP2430_EN_GPIO5_MASK				(1 << 10)

#define OMAP2430_EN_MCSPI3_SHIFT			9

#define OMAP2430_EN_MCSPI3_MASK				(1 << 9)

#define OMAP2430_EN_MMCHS2_SHIFT			8

#define OMAP2430_EN_MMCHS2_MASK				(1 << 8)

#define OMAP2430_EN_MMCHS1_SHIFT			7

#define OMAP2430_EN_MMCHS1_MASK				(1 << 7)

#define OMAP24XX_EN_UART3_SHIFT				2

#define OMAP24XX_EN_UART3_MASK				(1 << 2)

#define OMAP24XX_EN_USB_SHIFT				0

#define OMAP24XX_EN_USB_MASK				(1 << 0)

/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */

#define OMAP2430_EN_MDM_INTC_SHIFT			11

#define OMAP2430_EN_MDM_INTC_MASK			(1 << 11)

#define OMAP2430_EN_USBHS_SHIFT				6

#define OMAP2430_EN_USBHS_MASK				(1 << 6)

#define OMAP24XX_EN_GPMC_SHIFT				1

#define OMAP24XX_EN_GPMC_MASK				(1 << 1)

/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */

#define OMAP2420_ST_MMC_SHIFT				26

#define OMAP2420_ST_MMC_MASK				(1 << 26)

#define OMAP24XX_ST_UART2_SHIFT				22

#define OMAP24XX_ST_UART2_MASK				(1 << 22)

#define OMAP24XX_ST_UART1_SHIFT				21

#define OMAP24XX_ST_UART1_MASK				(1 << 21)

#define OMAP24XX_ST_MCSPI2_SHIFT			18

#define OMAP24XX_ST_MCSPI2_MASK				(1 << 18)

#define OMAP24XX_ST_MCSPI1_SHIFT			17

#define OMAP24XX_ST_MCSPI1_MASK				(1 << 17)

#define OMAP24XX_ST_MCBSP2_SHIFT			16

#define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)

#define OMAP24XX_ST_MCBSP1_SHIFT			15

#define OMAP24XX_ST_MCBSP1_MASK				(1 << 15)

#define OMAP24XX_ST_GPT12_SHIFT				14

#define OMAP24XX_ST_GPT12_MASK				(1 << 14)

#define OMAP24XX_ST_GPT11_SHIFT				13

#define OMAP24XX_ST_GPT11_MASK				(1 << 13)

#define OMAP24XX_ST_GPT10_SHIFT				12

#define OMAP24XX_ST_GPT10_MASK				(1 << 12)

#define OMAP24XX_ST_GPT9_SHIFT				11

#define OMAP24XX_ST_GPT9_MASK				(1 << 11)

#define OMAP24XX_ST_GPT8_SHIFT				10

#define OMAP24XX_ST_GPT8_MASK				(1 << 10)

#define OMAP24XX_ST_GPT7_SHIFT				9

#define OMAP24XX_ST_GPT7_MASK				(1 << 9)

#define OMAP24XX_ST_GPT6_SHIFT				8

#define OMAP24XX_ST_GPT6_MASK				(1 << 8)

#define OMAP24XX_ST_GPT5_SHIFT				7

#define OMAP24XX_ST_GPT5_MASK				(1 << 7)

#define OMAP24XX_ST_GPT4_SHIFT				6

#define OMAP24XX_ST_GPT4_MASK				(1 << 6)

#define OMAP24XX_ST_GPT3_SHIFT				5

#define OMAP24XX_ST_GPT3_MASK				(1 << 5)

#define OMAP24XX_ST_GPT2_SHIFT				4

#define OMAP24XX_ST_GPT2_MASK				(1 << 4)

#define OMAP2420_ST_VLYNQ_SHIFT				3

#define OMAP2420_ST_VLYNQ_MASK				(1 << 3)

/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */

#define OMAP2430_ST_MDM_INTC_SHIFT			11

#define OMAP2430_ST_MDM_INTC_MASK			(1 << 11)

#define OMAP2430_ST_GPIO5_SHIFT				10

#define OMAP2430_ST_GPIO5_MASK				(1 << 10)

#define OMAP2430_ST_MCSPI3_SHIFT			9

#define OMAP2430_ST_MCSPI3_MASK				(1 << 9)

#define OMAP2430_ST_MMCHS2_SHIFT			8

#define OMAP2430_ST_MMCHS2_MASK				(1 << 8)

#define OMAP2430_ST_MMCHS1_SHIFT			7

#define OMAP2430_ST_MMCHS1_MASK				(1 << 7)

#define OMAP2430_ST_USBHS_SHIFT				6

#define OMAP2430_ST_USBHS_MASK				(1 << 6)

#define OMAP24XX_ST_UART3_SHIFT				2

#define OMAP24XX_ST_UART3_MASK				(1 << 2)

#define OMAP24XX_ST_USB_SHIFT				0

#define OMAP24XX_ST_USB_MASK				(1 << 0)

/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */

#define OMAP24XX_EN_GPIOS_SHIFT				2

#define OMAP24XX_EN_GPIOS_MASK				(1 << 2)

#define OMAP24XX_EN_GPT1_SHIFT				0

#define OMAP24XX_EN_GPT1_MASK				(1 << 0)

/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */

#define OMAP24XX_ST_GPIOS_SHIFT				2

#define OMAP24XX_ST_GPIOS_MASK				(1 << 2)

#define OMAP24XX_ST_32KSYNC_SHIFT			1

#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)

#define OMAP24XX_ST_GPT1_SHIFT				0

#define OMAP24XX_ST_GPT1_MASK				(1 << 0)

/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */

#define OMAP2430_ST_MDM_SHIFT				0

#define OMAP2430_ST_MDM_MASK				(1 << 0)


/* 3430 register bits shared between CM & PRM registers */

/* CM_REVISION, PRM_REVISION shared bits */

#define OMAP3430_REV_SHIFT				0

#define OMAP3430_REV_MASK				(0xff << 0)

/* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */

#define OMAP3430_AUTOIDLE_MASK				(1 << 0)

/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */

#define OMAP3430_EN_MMC3_MASK				(1 << 30)

#define OMAP3430_EN_MMC3_SHIFT				30

#define OMAP3430_EN_MMC2_MASK				(1 << 25)

#define OMAP3430_EN_MMC2_SHIFT				25

#define OMAP3430_EN_MMC1_MASK				(1 << 24)

#define OMAP3430_EN_MMC1_SHIFT				24

#define AM35XX_EN_UART4_MASK				(1 << 23)

#define AM35XX_EN_UART4_SHIFT				23

#define OMAP3430_EN_MCSPI4_MASK				(1 << 21)

#define OMAP3430_EN_MCSPI4_SHIFT			21

#define OMAP3430_EN_MCSPI3_MASK				(1 << 20)

#define OMAP3430_EN_MCSPI3_SHIFT			20

#define OMAP3430_EN_MCSPI2_MASK				(1 << 19)

#define OMAP3430_EN_MCSPI2_SHIFT			19

#define OMAP3430_EN_MCSPI1_MASK				(1 << 18)

#define OMAP3430_EN_MCSPI1_SHIFT			18

#define OMAP3430_EN_I2C3_MASK				(1 << 17)

#define OMAP3430_EN_I2C3_SHIFT				17

#define OMAP3430_EN_I2C2_MASK				(1 << 16)

#define OMAP3430_EN_I2C2_SHIFT				16

#define OMAP3430_EN_I2C1_MASK				(1 << 15)

#define OMAP3430_EN_I2C1_SHIFT				15

#define OMAP3430_EN_UART2_MASK				(1 << 14)

#define OMAP3430_EN_UART2_SHIFT				14

#define OMAP3430_EN_UART1_MASK				(1 << 13)

#define OMAP3430_EN_UART1_SHIFT				13

#define OMAP3430_EN_GPT11_MASK				(1 << 12)

#define OMAP3430_EN_GPT11_SHIFT				12

#define OMAP3430_EN_GPT10_MASK				(1 << 11)

#define OMAP3430_EN_GPT10_SHIFT				11

#define OMAP3430_EN_MCBSP5_MASK				(1 << 10)

#define OMAP3430_EN_MCBSP5_SHIFT			10

#define OMAP3430_EN_MCBSP1_MASK				(1 << 9)

#define OMAP3430_EN_MCBSP1_SHIFT			9

#define OMAP3430_EN_FSHOSTUSB_MASK			(1 << 5)

#define OMAP3430_EN_FSHOSTUSB_SHIFT			5

#define OMAP3430_EN_D2D_MASK				(1 << 3)

#define OMAP3430_EN_D2D_SHIFT				3

/* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */

#define OMAP3430_EN_HSOTGUSB_MASK			(1 << 4)

#define OMAP3430_EN_HSOTGUSB_SHIFT			4

/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */

#define OMAP3430_ST_MMC3_SHIFT				30

#define OMAP3430_ST_MMC3_MASK				(1 << 30)

#define OMAP3430_ST_MMC2_SHIFT				25

#define OMAP3430_ST_MMC2_MASK				(1 << 25)

#define OMAP3430_ST_MMC1_SHIFT				24

#define OMAP3430_ST_MMC1_MASK				(1 << 24)

#define OMAP3430_ST_MCSPI4_SHIFT			21

#define OMAP3430_ST_MCSPI4_MASK				(1 << 21)

#define OMAP3430_ST_MCSPI3_SHIFT			20

#define OMAP3430_ST_MCSPI3_MASK				(1 << 20)

#define OMAP3430_ST_MCSPI2_SHIFT			19

#define OMAP3430_ST_MCSPI2_MASK				(1 << 19)

#define OMAP3430_ST_MCSPI1_SHIFT			18

#define OMAP3430_ST_MCSPI1_MASK				(1 << 18)

#define OMAP3430_ST_I2C3_SHIFT				17

#define OMAP3430_ST_I2C3_MASK				(1 << 17)

#define OMAP3430_ST_I2C2_SHIFT				16

#define OMAP3430_ST_I2C2_MASK				(1 << 16)

#define OMAP3430_ST_I2C1_SHIFT				15

#define OMAP3430_ST_I2C1_MASK				(1 << 15)

#define OMAP3430_ST_UART2_SHIFT				14

#define OMAP3430_ST_UART2_MASK				(1 << 14)

#define OMAP3430_ST_UART1_SHIFT				13

#define OMAP3430_ST_UART1_MASK				(1 << 13)

#define OMAP3430_ST_GPT11_SHIFT				12

#define OMAP3430_ST_GPT11_MASK				(1 << 12)

#define OMAP3430_ST_GPT10_SHIFT				11

#define OMAP3430_ST_GPT10_MASK				(1 << 11)

#define OMAP3430_ST_MCBSP5_SHIFT			10

#define OMAP3430_ST_MCBSP5_MASK				(1 << 10)

#define OMAP3430_ST_MCBSP1_SHIFT			9

#define OMAP3430_ST_MCBSP1_MASK				(1 << 9)

#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT			5

#define OMAP3430ES1_ST_FSHOSTUSB_MASK			(1 << 5)

#define OMAP3430ES1_ST_HSOTGUSB_SHIFT			4

#define OMAP3430ES1_ST_HSOTGUSB_MASK			(1 << 4)

#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT		5

#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK		(1 << 5)

#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT		4

#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK		(1 << 4)

#define OMAP3430_ST_D2D_SHIFT				3

#define OMAP3430_ST_D2D_MASK				(1 << 3)

/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */

#define OMAP3430_EN_GPIO1_MASK				(1 << 3)

#define OMAP3430_EN_GPIO1_SHIFT				3

#define OMAP3430_EN_GPT12_MASK				(1 << 1)

#define OMAP3430_EN_GPT12_SHIFT				1

#define OMAP3430_EN_GPT1_MASK				(1 << 0)

#define OMAP3430_EN_GPT1_SHIFT				0

/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */

#define OMAP3430_EN_SR2_MASK				(1 << 7)

#define OMAP3430_EN_SR2_SHIFT				7

#define OMAP3430_EN_SR1_MASK				(1 << 6)

#define OMAP3430_EN_SR1_SHIFT				6

/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */

#define OMAP3430_EN_GPT12_MASK				(1 << 1)

#define OMAP3430_EN_GPT12_SHIFT				1

/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */

#define OMAP3430_ST_SR2_SHIFT				7

#define OMAP3430_ST_SR2_MASK				(1 << 7)

#define OMAP3430_ST_SR1_SHIFT				6

#define OMAP3430_ST_SR1_MASK				(1 << 6)

#define OMAP3430_ST_GPIO1_SHIFT				3

#define OMAP3430_ST_GPIO1_MASK				(1 << 3)

#define OMAP3430_ST_32KSYNC_SHIFT			2

#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)

#define OMAP3430_ST_GPT12_SHIFT				1

#define OMAP3430_ST_GPT12_MASK				(1 << 1)

#define OMAP3430_ST_GPT1_SHIFT				0

#define OMAP3430_ST_GPT1_MASK				(1 << 0)

/*
 * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
 * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
 * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
 */

#define OMAP3430_EN_MPU_MASK				(1 << 1)

#define OMAP3430_EN_MPU_SHIFT				1

/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */


#define OMAP3630_EN_UART4_MASK				(1 << 18)

#define OMAP3630_EN_UART4_SHIFT				18

#define OMAP3430_EN_GPIO6_MASK				(1 << 17)

#define OMAP3430_EN_GPIO6_SHIFT				17

#define OMAP3430_EN_GPIO5_MASK				(1 << 16)

#define OMAP3430_EN_GPIO5_SHIFT				16

#define OMAP3430_EN_GPIO4_MASK				(1 << 15)

#define OMAP3430_EN_GPIO4_SHIFT				15

#define OMAP3430_EN_GPIO3_MASK				(1 << 14)

#define OMAP3430_EN_GPIO3_SHIFT				14

#define OMAP3430_EN_GPIO2_MASK				(1 << 13)

#define OMAP3430_EN_GPIO2_SHIFT				13

#define OMAP3430_EN_UART3_MASK				(1 << 11)

#define OMAP3430_EN_UART3_SHIFT				11

#define OMAP3430_EN_GPT9_MASK				(1 << 10)

#define OMAP3430_EN_GPT9_SHIFT				10

#define OMAP3430_EN_GPT8_MASK				(1 << 9)

#define OMAP3430_EN_GPT8_SHIFT				9

#define OMAP3430_EN_GPT7_MASK				(1 << 8)

#define OMAP3430_EN_GPT7_SHIFT				8

#define OMAP3430_EN_GPT6_MASK				(1 << 7)

#define OMAP3430_EN_GPT6_SHIFT				7

#define OMAP3430_EN_GPT5_MASK				(1 << 6)

#define OMAP3430_EN_GPT5_SHIFT				6

#define OMAP3430_EN_GPT4_MASK				(1 << 5)

#define OMAP3430_EN_GPT4_SHIFT				5

#define OMAP3430_EN_GPT3_MASK				(1 << 4)

#define OMAP3430_EN_GPT3_SHIFT				4

#define OMAP3430_EN_GPT2_MASK				(1 << 3)

#define OMAP3430_EN_GPT2_SHIFT				3

/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
/* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
 * be ST_* bits instead? */

#define OMAP3430_EN_MCBSP4_MASK				(1 << 2)

#define OMAP3430_EN_MCBSP4_SHIFT			2

#define OMAP3430_EN_MCBSP3_MASK				(1 << 1)

#define OMAP3430_EN_MCBSP3_SHIFT			1

#define OMAP3430_EN_MCBSP2_MASK				(1 << 0)

#define OMAP3430_EN_MCBSP2_SHIFT			0

/* CM_IDLEST_PER, PM_WKST_PER shared bits */

#define OMAP3630_ST_UART4_SHIFT				18

#define OMAP3630_ST_UART4_MASK				(1 << 18)

#define OMAP3430_ST_GPIO6_SHIFT				17

#define OMAP3430_ST_GPIO6_MASK				(1 << 17)

#define OMAP3430_ST_GPIO5_SHIFT				16

#define OMAP3430_ST_GPIO5_MASK				(1 << 16)

#define OMAP3430_ST_GPIO4_SHIFT				15

#define OMAP3430_ST_GPIO4_MASK				(1 << 15)

#define OMAP3430_ST_GPIO3_SHIFT				14

#define OMAP3430_ST_GPIO3_MASK				(1 << 14)

#define OMAP3430_ST_GPIO2_SHIFT				13

#define OMAP3430_ST_GPIO2_MASK				(1 << 13)

#define OMAP3430_ST_UART3_SHIFT				11

#define OMAP3430_ST_UART3_MASK				(1 << 11)

#define OMAP3430_ST_GPT9_SHIFT				10

#define OMAP3430_ST_GPT9_MASK				(1 << 10)

#define OMAP3430_ST_GPT8_SHIFT				9

#define OMAP3430_ST_GPT8_MASK				(1 << 9)

#define OMAP3430_ST_GPT7_SHIFT				8

#define OMAP3430_ST_GPT7_MASK				(1 << 8)

#define OMAP3430_ST_GPT6_SHIFT				7

#define OMAP3430_ST_GPT6_MASK				(1 << 7)

#define OMAP3430_ST_GPT5_SHIFT				6

#define OMAP3430_ST_GPT5_MASK				(1 << 6)

#define OMAP3430_ST_GPT4_SHIFT				5

#define OMAP3430_ST_GPT4_MASK				(1 << 5)

#define OMAP3430_ST_GPT3_SHIFT				4

#define OMAP3430_ST_GPT3_MASK				(1 << 4)

#define OMAP3430_ST_GPT2_SHIFT				3

#define OMAP3430_ST_GPT2_MASK				(1 << 3)

/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */

#define OMAP3430_EN_CORE_SHIFT				0

#define OMAP3430_EN_CORE_MASK				(1 << 0)



/*
 * Maximum time(us) it takes to output the signal WUCLKOUT of the last
 * pad of the I/O ring after asserting WUCLKIN high.  Tero measured
 * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4
 * microseconds on OMAP4, so this timeout may be too high.
 */

#define MAX_IOPAD_LATCH_TIME			100
# ifndef __ASSEMBLER__

#include <linux/delay.h>

/**
 * omap_test_timeout - busy-loop, testing a condition
 * @cond: condition to test until it evaluates to true
 * @timeout: maximum number of microseconds in the timeout
 * @index: loop index (integer)
 *
 * Loop waiting for @cond to become true or until at least @timeout
 * microseconds have passed.  To use, define some integer @index in the
 * calling code.  After running, if @index == @timeout, then the loop has
 * timed out.
 */

#define omap_test_timeout(cond, timeout, index)			\
({                                                              \
        for (index = 0; index < timeout; index++) {             \
                if (cond)                                       \
                        break;                                  \
                udelay(1);                                      \
        }                                                       \
})

/**
 * struct omap_prcm_irq - describes a PRCM interrupt bit
 * @name: a short name describing the interrupt type, e.g. "wkup" or "io"
 * @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs
 * @priority: should this interrupt be handled before @priority=false IRQs?
 *
 * Describes interrupt bits inside the PRM_IRQ{ENABLE,STATUS}_MPU* registers.
 * On systems with multiple PRM MPU IRQ registers, the bitfields read from
 * the registers are concatenated, so @offset could be > 31 on these systems -
 * see omap_prm_irq_handler() for more details.  I/O ring interrupts should
 * have @priority set to true.
 */

struct omap_prcm_irq {
	
const char *name;
	
unsigned int offset;
	
bool priority;
};

/**
 * struct omap_prcm_irq_setup - PRCM interrupt controller details
 * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register
 * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register
 * @pm_ctrl: PRM register offset for the PRM_IO_PMCTRL register
 * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers
 * @nr_irqs: number of entries in the @irqs array
 * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs)
 * @irq: MPU IRQ asserted when a PRCM interrupt arrives
 * @read_pending_irqs: fn ptr to determine if any PRCM IRQs are pending
 * @ocp_barrier: fn ptr to force buffered PRM writes to complete
 * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
 * @restore_irqen: fn ptr to save and clear IRQENABLE regs
 * @reconfigure_io_chain: fn ptr to reconfigure IO chain
 * @saved_mask: IRQENABLE regs are saved here during suspend
 * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true
 * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init
 * @suspended: set to true after Linux suspend code has called our ->prepare()
 * @suspend_save_flag: set to true after IRQ masks have been saved and disabled
 *
 * @saved_mask, @priority_mask, @base_irq, @suspended, and
 * @suspend_save_flag are populated dynamically, and are not to be
 * specified in static initializers.
 */

struct omap_prcm_irq_setup {
	
u16 ack;
	
u16 mask;
	
u16 pm_ctrl;
	
u8 nr_regs;
	
u8 nr_irqs;
	
const struct omap_prcm_irq *irqs;
	
int irq;
	
unsigned int (*xlate_irq)(unsigned int);
	
void (*read_pending_irqs)(unsigned long *events);
	
void (*ocp_barrier)(void);
	
void (*save_and_clear_irqen)(u32 *saved_mask);
	
void (*restore_irqen)(u32 *saved_mask);
	
void (*reconfigure_io_chain)(void);
	
u32 *saved_mask;
	
u32 *priority_mask;
	
int base_irq;
	
bool suspended;
	
bool suspend_save_flag;
};

/* OMAP_PRCM_IRQ: convenience macro for creating struct omap_prcm_irq records */

#define OMAP_PRCM_IRQ(_name, _offset, _priority) {       \
        .name = _name,                                  \
        .offset = _offset,                              \
        .priority = _priority                           \
        }

/**
 * struct omap_prcm_init_data - PRCM driver init data
 * @index: clock memory mapping index to be used
 * @mem: IO mem pointer for this module
 * @offset: module base address offset from the IO base
 * @flags: PRCM module init flags
 * @device_inst_offset: device instance offset within the module address space
 * @init: low level PRCM init function for this module
 * @np: device node for this PRCM module
 */

struct omap_prcm_init_data {
	
int index;
	
void __iomem *mem;
	
s16 offset;
	
u16 flags;
	
s32 device_inst_offset;
	
int (*init)(const struct omap_prcm_init_data *data);
	
struct device_node *np;
};

extern void omap_prcm_irq_cleanup(void);
extern int omap_prcm_register_chain_handler(
	struct omap_prcm_irq_setup *irq_setup);
extern int omap_prcm_event_to_irq(const char *event);
extern void omap_prcm_irq_prepare(void);
extern void omap_prcm_irq_complete(void);

# endif

#endif


Overall Contributors

PersonTokensPropCommitsCommitProp
Paul Walmsley124977.15%825.81%
Tero Kristo22413.84%929.03%
Aida Mynzhasova332.04%26.45%
Tony Lindgren241.48%26.45%
Varadarajan, Charulatha160.99%13.23%
Vaibhav Hiremath160.99%13.23%
Kevin Hilman150.93%26.45%
Marc Zyngier110.68%13.23%
Govindraj Raja80.49%13.23%
Afzal Mohammed80.49%13.23%
Kyle Manna60.37%13.23%
Vishwanath Sripathy50.31%13.23%
J Keerthy40.25%13.23%
Total1619100.00%31100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.