cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-omap2/voltage.h

/*
 * OMAP Voltage Management Routines
 *
 * Author: Thara Gopinath       <thara@ti.com>
 *
 * Copyright (C) 2009 Texas Instruments, Inc.
 * Thara Gopinath <thara@ti.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H

#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H

#include <linux/err.h>

#include <linux/platform_data/voltage-omap.h>

#include "vc.h"
#include "vp.h"

struct powerdomain;

/*
 * OMAP3 GENERIC setup times. Revisit to see if these needs to be
 * passed from board or PMIC file
 */

#define OMAP3_CLKSETUP		0xff

#define OMAP3_VOLTOFFSET	0xff

#define OMAP3_VOLTSETUP2	0xff

/**
 * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield
 * data
 * @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
 * @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
 * @voltsetup_off_reg: register offset of PRM_VOLTSETUP_OFF from PRM base
 *
 * XXX What about VOLTOFFSET/VOLTCTRL?
 */

struct omap_vfsm_instance {
	
u32 voltsetup_mask;
	
u8 voltsetup_reg;
	
u8 voltsetup_off_reg;
};

/**
 * struct voltagedomain - omap voltage domain global structure.
 * @name: Name of the voltage domain which can be used as a unique identifier.
 * @scalable: Whether or not this voltage domain is scalable
 * @node: list_head linking all voltage domains
 * @vc: pointer to VC channel associated with this voltagedomain
 * @vp: pointer to VP associated with this voltagedomain
 * @read: read a VC/VP register
 * @write: write a VC/VP register
 * @read: read-modify-write a VC/VP register
 * @sys_clk: system clock name/frequency, used for various timing calculations
 * @scale: function used to scale the voltage of the voltagedomain
 * @nominal_volt: current nominal voltage for this voltage domain
 * @volt_data: voltage table having the distinct voltages supported
 *             by the domain and other associated per voltage data.
 */

struct voltagedomain {
	
char *name;
	
bool scalable;
	
struct list_head node;
	
struct omap_vc_channel *vc;
	
const struct omap_vfsm_instance *vfsm;
	
struct omap_vp_instance *vp;
	
struct omap_voltdm_pmic *pmic;
	
struct omap_vp_param *vp_param;
	
struct omap_vc_param *vc_param;

	/* VC/VP register access functions: SoC specific */
	
u32 (*read) (u8 offset);
	
void (*write) (u32 val, u8 offset);
	
u32 (*rmw)(u32 mask, u32 bits, u8 offset);

	union {
		
const char *name;
		
u32 rate;
	} 
sys_clk;

	
int (*scale) (struct voltagedomain *voltdm,
		      unsigned long target_volt);

	
u32 nominal_volt;
	
struct omap_volt_data *volt_data;
};

/* Min and max voltages from OMAP perspective */

#define OMAP3430_VP1_VLIMITTO_VDDMIN	850000

#define OMAP3430_VP1_VLIMITTO_VDDMAX	1425000

#define OMAP3430_VP2_VLIMITTO_VDDMIN	900000

#define OMAP3430_VP2_VLIMITTO_VDDMAX	1150000


#define OMAP3630_VP1_VLIMITTO_VDDMIN	900000

#define OMAP3630_VP1_VLIMITTO_VDDMAX	1350000

#define OMAP3630_VP2_VLIMITTO_VDDMIN	900000

#define OMAP3630_VP2_VLIMITTO_VDDMAX	1200000


#define OMAP4_VP_MPU_VLIMITTO_VDDMIN	830000

#define OMAP4_VP_MPU_VLIMITTO_VDDMAX	1410000

#define OMAP4_VP_IVA_VLIMITTO_VDDMIN	830000

#define OMAP4_VP_IVA_VLIMITTO_VDDMAX	1260000

#define OMAP4_VP_CORE_VLIMITTO_VDDMIN	830000

#define OMAP4_VP_CORE_VLIMITTO_VDDMAX	1200000

/**
 * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
 * @slew_rate:  PMIC slew rate (in uv/us)
 * @step_size:  PMIC voltage step size (in uv)
 * @i2c_slave_addr: I2C slave address of PMIC
 * @volt_reg_addr: voltage configuration register address
 * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
 * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC
 * @i2c_mcode: master code value for I2C high-speed preamble transmission
 * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV.
 * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value.
 */

struct omap_voltdm_pmic {
	
int slew_rate;
	
int step_size;
	
u16 i2c_slave_addr;
	
u16 volt_reg_addr;
	
u16 cmd_reg_addr;
	
u8 vp_erroroffset;
	
u8 vp_vstepmin;
	
u8 vp_vstepmax;
	
u32 vddmin;
	
u32 vddmax;
	
u8 vp_timeout_us;
	
bool i2c_high_speed;
	
u32 i2c_pad_load;
	
u8 i2c_mcode;
	
unsigned long (*vsel_to_uv) (const u8 vsel);
	
u8 (*uv_to_vsel) (unsigned long uV);
};


struct omap_vp_param {
	
u32 vddmax;
	
u32 vddmin;
};


struct omap_vc_param {
	
u32 on;
	
u32 onlp;
	
u32 ret;
	
u32 off;
};

void omap_voltage_get_volttable(struct voltagedomain *voltdm,
		struct omap_volt_data **volt_data);
struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
		unsigned long volt);
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
			       struct omap_voltdm_pmic *pmic);
int omap_voltage_late_init(void);

extern void omap2xxx_voltagedomains_init(void);
extern void omap3xxx_voltagedomains_init(void);
extern void omap44xx_voltagedomains_init(void);
extern void omap54xx_voltagedomains_init(void);

struct voltagedomain *voltdm_lookup(const char *name);
void voltdm_init(struct voltagedomain **voltdm_list);
int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm);
int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
void voltdm_reset(struct voltagedomain *voltdm);
unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
#endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Kevin Hilman20843.51%1959.38%
Thara Gopinath12626.36%13.12%
Nishanth Menon5912.34%13.12%
Tero Kristo479.83%412.50%
Santosh Shilimkar183.77%39.38%
Paul Walmsley163.35%13.12%
J Keerthy20.42%13.12%
Rickard Strandqvist10.21%13.12%
Arnd Bergmann10.21%13.12%
Total478100.00%32100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.