Release 4.11 arch/arm/mach-pxa/cm-x2xx-pci.c
/*
* linux/arch/arm/mach-pxa/cm-x2xx-pci.c
*
* PCI bios-type initialisation for PCI machines
*
* Bits taken from various places.
*
* Copyright (C) 2007, 2008 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
void __iomem *it8152_base_address;
static int cmx2xx_it8152_irq_gpio;
static void cmx2xx_it8152_irq_demux(struct irq_desc *desc)
{
/* clear our parent irq */
desc->irq_data.chip->irq_ack(&desc->irq_data);
it8152_irq_demux(desc);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 20 | 64.52% | 2 | 50.00% |
Lennert Buytenhek | 7 | 22.58% | 1 | 25.00% |
Eric Miao | 4 | 12.90% | 1 | 25.00% |
Total | 31 | 100.00% | 4 | 100.00% |
void __cmx2xx_pci_init_irq(int irq_gpio)
{
it8152_init_irq();
cmx2xx_it8152_irq_gpio = irq_gpio;
irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
irq_set_chained_handler(gpio_to_irq(irq_gpio),
cmx2xx_it8152_irq_demux);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 32 | 91.43% | 3 | 60.00% |
Thomas Gleixner | 2 | 5.71% | 1 | 20.00% |
Dmitry Baryshkov | 1 | 2.86% | 1 | 20.00% |
Total | 35 | 100.00% | 5 | 100.00% |
#ifdef CONFIG_PM
static unsigned long sleep_save_ite[10];
void __cmx2xx_pci_suspend(void)
{
/* save ITE state */
sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
/* Clear ITE IRQ's */
__raw_writel((0), IT8152_INTC_PDCNIRR);
__raw_writel((0), IT8152_INTC_LPCNIRR);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 57 | 100.00% | 2 | 100.00% |
Total | 57 | 100.00% | 2 | 100.00% |
void __cmx2xx_pci_resume(void)
{
/* restore IT8152 state */
__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
__raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 44 | 100.00% | 2 | 100.00% |
Total | 44 | 100.00% | 2 | 100.00% |
#else
void cmx2xx_pci_suspend(void) {}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 6 | 100.00% | 2 | 100.00% |
Total | 6 | 100.00% | 2 | 100.00% |
void cmx2xx_pci_resume(void) {}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 6 | 100.00% | 2 | 100.00% |
Total | 6 | 100.00% | 2 | 100.00% |
#endif
/* PCI IRQ mapping*/
static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int irq;
dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
irq = it8152_pci_map_irq(dev, slot, pin);
if (irq)
return irq;
/*
Here comes the ugly part. The routing is baseboard specific,
but defining a platform for each possible base of CM-X2XX is
unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
*/
/* ATXBASE PCI slot */
if (slot == 7)
return IT8152_PCI_INTA;
/* ATXBase/SB-X2XX CardBus */
if (slot == 8 || slot == 0)
return IT8152_PCI_INTB;
/* ATXBase Ethernet */
if (slot == 9)
return IT8152_PCI_INTA;
/* CM-x255 Onboard Ethernet */
if (slot == 15)
return IT8152_PCI_INTC;
/* SB-x2xx Ethernet */
if (slot == 16)
return IT8152_PCI_INTA;
/* PC104+ interrupt routing */
if ((slot == 17) || (slot == 19))
return IT8152_PCI_INTA;
if ((slot == 18) || (slot == 20))
return IT8152_PCI_INTB;
return(0);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 149 | 98.68% | 4 | 66.67% |
Ralf Bächle | 1 | 0.66% | 1 | 16.67% |
Harvey Harrison | 1 | 0.66% | 1 | 16.67% |
Total | 151 | 100.00% | 6 | 100.00% |
static void cmx2xx_pci_preinit(void)
{
pr_info("Initializing CM-X2XX PCI subsystem\n");
pcibios_min_io = 0;
pcibios_min_mem = 0;
__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
pr_info("PCI Bridge found.\n");
/* set PCI I/O base at 0 */
writel(0x848, IT8152_PCI_CFG_ADDR);
writel(0, IT8152_PCI_CFG_DATA);
/* set PCI memory base at 0 */
writel(0x840, IT8152_PCI_CFG_ADDR);
writel(0, IT8152_PCI_CFG_DATA);
writel(0x20, IT8152_GPIO_GPDR);
/* CardBus Controller on ATXbase baseboard */
writel(0x4000, IT8152_PCI_CFG_ADDR);
if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
pr_info("CardBus Bridge found.\n");
/* Configure socket 0 */
writel(0x408C, IT8152_PCI_CFG_ADDR);
writel(0x1022, IT8152_PCI_CFG_DATA);
writel(0x4080, IT8152_PCI_CFG_ADDR);
writel(0x3844d060, IT8152_PCI_CFG_DATA);
writel(0x4090, IT8152_PCI_CFG_ADDR);
writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
0x60440000),
IT8152_PCI_CFG_DATA);
writel(0x4018, IT8152_PCI_CFG_ADDR);
writel(0xb0000000, IT8152_PCI_CFG_DATA);
/* Configure socket 1 */
writel(0x418C, IT8152_PCI_CFG_ADDR);
writel(0x1022, IT8152_PCI_CFG_DATA);
writel(0x4180, IT8152_PCI_CFG_ADDR);
writel(0x3844d060, IT8152_PCI_CFG_DATA);
writel(0x4190, IT8152_PCI_CFG_ADDR);
writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
0x60440000),
IT8152_PCI_CFG_DATA);
writel(0x4118, IT8152_PCI_CFG_ADDR);
writel(0xb0000000, IT8152_PCI_CFG_DATA);
}
}
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 233 | 96.68% | 3 | 75.00% |
Rob Herring | 8 | 3.32% | 1 | 25.00% |
Total | 241 | 100.00% | 4 | 100.00% |
static struct hw_pci cmx2xx_pci __initdata = {
.map_irq = cmx2xx_pci_map_irq,
.nr_controllers = 1,
.ops = &it8152_ops,
.setup = it8152_pci_setup,
.preinit = cmx2xx_pci_preinit,
};
static int __init cmx2xx_init_pci(void)
{
if (machine_is_armcore())
pci_common_init(&cmx2xx_pci);
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 23 | 100.00% | 2 | 100.00% |
Total | 23 | 100.00% | 2 | 100.00% |
subsys_initcall(cmx2xx_init_pci);
Overall Contributors
Person | Tokens | Prop | Commits | CommitProp |
Mike Rapoport | 657 | 95.36% | 5 | 35.71% |
Rob Herring | 8 | 1.16% | 1 | 7.14% |
Lennert Buytenhek | 7 | 1.02% | 1 | 7.14% |
Russell King | 5 | 0.73% | 1 | 7.14% |
Eric Miao | 4 | 0.58% | 1 | 7.14% |
Arnd Bergmann | 3 | 0.44% | 1 | 7.14% |
Thomas Gleixner | 2 | 0.29% | 1 | 7.14% |
Harvey Harrison | 1 | 0.15% | 1 | 7.14% |
Dmitry Baryshkov | 1 | 0.15% | 1 | 7.14% |
Ralf Bächle | 1 | 0.15% | 1 | 7.14% |
Total | 689 | 100.00% | 14 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.