cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-pxa/colibri-pxa320.c

/*
 *  arch/arm/mach-pxa/colibri-pxa320.c
 *
 *  Support for Toradex PXA320/310 based Colibri module
 *
 *  Daniel Mack <daniel@caiaq.de>
 *  Matthias Meier <matthias.j.meier@gmx.net>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  published by the Free Software Foundation.
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/usb/gpio_vbus.h>

#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>

#include "pxa320.h"
#include "colibri.h"
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <mach/audio.h>
#include "pxa27x-udc.h"
#include "udc.h"

#include "generic.h"
#include "devices.h"

#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD

static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
	/* MMC */
	GPIO22_MMC1_CLK,
	GPIO23_MMC1_CMD,
	GPIO18_MMC1_DAT0,
	GPIO19_MMC1_DAT1,
	GPIO20_MMC1_DAT2,
	GPIO21_MMC1_DAT3,
	GPIO28_GPIO,	/* SD detect */

	/* UART 1 configuration (may be set by bootloader) */
	GPIO99_UART1_CTS,
	GPIO104_UART1_RTS,
	GPIO97_UART1_RXD,
	GPIO98_UART1_TXD,
	GPIO101_UART1_DTR,
	GPIO103_UART1_DSR,
	GPIO100_UART1_DCD,
	GPIO102_UART1_RI,

	/* UART 2 configuration */
	GPIO109_UART2_CTS,
	GPIO112_UART2_RTS,
	GPIO110_UART2_RXD,
	GPIO111_UART2_TXD,

	/* UART 3 configuration */
	GPIO30_UART3_RXD,
	GPIO31_UART3_TXD,

	/* UHC */
	GPIO2_2_USBH_PEN,
	GPIO3_2_USBH_PWR,

	/* I2C */
	GPIO32_I2C_SCL,
	GPIO33_I2C_SDA,

	/* PCMCIA */
	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
	GPIO27_GPIO,		/* RDnWR ; input/tristate */
	GPIO50_GPIO,		/* PREG ; input/tristate */
	GPIO2_RDY,
	GPIO5_NPIOR,
	GPIO6_NPIOW,
	GPIO7_NPIOS16,
	GPIO8_NPWAIT,
	GPIO29_GPIO,		/* PRDY (READY GPIO) */
	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
	GPIO77_GPIO,		/* PRST (RESET GPIO) */
	GPIO53_GPIO,		/* PBVD1 */
	GPIO79_GPIO,		/* PBVD2 */
	GPIO54_GPIO,		/* POE */
};
#else

static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
#endif

#if defined(CONFIG_AX88796)

#define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
/*
 * Asix AX88796 Ethernet
 */

static struct ax_plat_data colibri_asix_platdata = {
	.flags		= 0, /* defined later */
	.wordlength	= 2,
};


static struct resource colibri_asix_resource[] = {
	[0] = {
		.start = PXA3xx_CS2_PHYS,
		.end   = PXA3xx_CS2_PHYS + (0x20 * 2) - 1,
		.flags = IORESOURCE_MEM,
        },
	[1] = {
		.start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
		.end   = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
        }
};


static struct platform_device asix_device = {
	.name		= "ax88796",
	.id		= 0,
	.num_resources 	= ARRAY_SIZE(colibri_asix_resource),
	.resource	= colibri_asix_resource,
	.dev		= {
		.platform_data = &colibri_asix_platdata
	}
};


static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = {
	GPIO3_nCS2,			/* AX88796 chip select */
	GPIO36_GPIO | MFP_PULL_HIGH	/* AX88796 IRQ */
};


static void __init colibri_pxa320_init_eth(void) { colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config)); platform_device_register(&asix_device); }

Contributors

PersonTokensPropCommitsCommitProp
Daniel Mack29100.00%2100.00%
Total29100.00%2100.00%

#else
static inline void __init colibri_pxa320_init_eth(void) {}

Contributors

PersonTokensPropCommitsCommitProp
Daniel Mack9100.00%1100.00%
Total9100.00%1100.00%

#endif /* CONFIG_AX88796 */ #if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE) static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = { .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96), .gpio_pullup = -1, }; static struct platform_device colibri_pxa320_gpio_vbus = { .name = "gpio-vbus", .id = -1, .dev = { .platform_data = &colibri_pxa320_gpio_vbus_info, }, };
static void colibri_pxa320_udc_command(int cmd) { if (cmd == PXA2XX_UDC_CMD_CONNECT) UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) UP2OCR = UP2OCR_HXOE; }

Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut32100.00%1100.00%
Total32100.00%1100.00%

static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = { .udc_command = colibri_pxa320_udc_command, .gpio_pullup = -1, };
static void __init colibri_pxa320_init_udc(void) { pxa_set_udc_info(&colibri_pxa320_udc_info); platform_device_register(&colibri_pxa320_gpio_vbus); }

Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut21100.00%1100.00%
Total21100.00%1100.00%

#else
static inline void colibri_pxa320_init_udc(void) {}

Contributors

PersonTokensPropCommitsCommitProp
Marek Vašut8100.00%1100.00%
Total8100.00%1100.00%

#endif #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = { GPIO6_2_LCD_LDD_0, GPIO7_2_LCD_LDD_1, GPIO8_2_LCD_LDD_2, GPIO9_2_LCD_LDD_3, GPIO10_2_LCD_LDD_4, GPIO11_2_LCD_LDD_5, GPIO12_2_LCD_LDD_6, GPIO13_2_LCD_LDD_7, GPIO63_LCD_LDD_8, GPIO64_LCD_LDD_9, GPIO65_LCD_LDD_10, GPIO66_LCD_LDD_11, GPIO67_LCD_LDD_12, GPIO68_LCD_LDD_13, GPIO69_LCD_LDD_14, GPIO70_LCD_LDD_15, GPIO71_LCD_LDD_16, GPIO72_LCD_LDD_17, GPIO73_LCD_CS_N, GPIO74_LCD_VSYNC, GPIO14_2_LCD_FCLK, GPIO15_2_LCD_LCLK, GPIO16_2_LCD_PCLK, GPIO17_2_LCD_BIAS, };
static void __init colibri_pxa320_init_lcd(void) { pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_lcd_pin_config)); }

Contributors

PersonTokensPropCommitsCommitProp
Daniel Mack17100.00%1100.00%
Total17100.00%1100.00%

#else
static inline void colibri_pxa320_init_lcd(void) {}

Contributors

PersonTokensPropCommitsCommitProp
Daniel Mack8100.00%1100.00%
Total8100.00%1100.00%

#endif #if defined(CONFIG_SND_AC97_CODEC) || \ defined(CONFIG_SND_AC97_CODEC_MODULE) static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = { GPIO34_AC97_SYSCLK, GPIO35_AC97_SDATA_IN_0, GPIO37_AC97_SDATA_OUT, GPIO38_AC97_SYNC, GPIO39_AC97_BITCLK, GPIO40_AC97_nACRESET };
static inline void __init colibri_pxa320_init_ac97(void) { pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_ac97_pin_config)); pxa_set_ac97_info(NULL); }

Contributors

PersonTokensPropCommitsCommitProp
Daniel Mack23100.00%1100.00%
Total23100.00%1100.00%

#else
static inline void colibri_pxa320_init_ac97(void) {}

Contributors

PersonTokensPropCommitsCommitProp
Daniel Mack8100.00%1100.00%
Total8100.00%1100.00%

#endif
void __init colibri_pxa320_init(void) { colibri_pxa320_init_eth(); colibri_pxa3xx_init_nand(); colibri_pxa320_init_lcd(); colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO)); colibri_pxa320_init_ac97(); colibri_pxa320_init_udc(); /* Evalboard init */ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config)); colibri_evalboard_init(); }

Contributors

PersonTokensPropCommitsCommitProp
Daniel Mack3479.07%562.50%
Marek Vašut920.93%337.50%
Total43100.00%8100.00%

MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") .atag_offset = 0x100, .init_machine = colibri_pxa320_init, .map_io = pxa3xx_map_io, .nr_irqs = PXA_NR_IRQS, .init_irq = pxa3xx_init_irq, .handle_irq = pxa3xx_handle_irq, .init_time = pxa_timer_init, .restart = pxa_restart, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Daniel Mack46156.91%730.43%
Marek Vašut32139.63%730.43%
Arnd Bergmann60.74%28.70%
Rob Herring50.62%14.35%
Russell King50.62%14.35%
Eric Miao50.62%14.35%
Haojian Zhuang40.49%28.70%
Stephen Warren20.25%14.35%
Nico Pitre10.12%14.35%
Total810100.00%23100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.