/* * Hardware definitions for HP iPAQ h5xxx Handheld Computers * * Copyright(20)02 Hewlett-Packard Company. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS * FITNESS FOR ANY PARTICULAR PURPOSE. * * Author: Jamey Hicks */ #ifndef __ASM_ARCH_H5000_H #define __ASM_ARCH_H5000_H #include "mfp-pxa25x.h" /* * CPU GPIOs */ #define H5000_GPIO_POWER_BUTTON (0) #define H5000_GPIO_RESET_BUTTON_N (1) #define H5000_GPIO_OPT_INT (2) #define H5000_GPIO_BACKUP_POWER (3) #define H5000_GPIO_ACTION_BUTTON (4) #define H5000_GPIO_COM_DCD_SOMETHING (5) /* what is this really ? */ /* 6 not connected */ #define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */ /* 8 not connected */ #define H5000_GPIO_RSO_N (9) /* reset output from max1702 which regulates 3.3 and 2.5 */ #define H5000_GPIO_ASIC_INT_N (10) /* from companion asic */ #define H5000_GPIO_BT_ENV_0 (11) /* to LMX9814, set to 1 according to regdump */ /*(12) not connected */ #define H5000_GPIO_BT_ENV_1 (13) /* to LMX9814, set to 1 according to regdump */ #define H5000_GPIO_BT_WU (14) /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */ /*(15) is CS1# */ /*(16) not connected */ /*(17) not connected */ /*(18) is pcmcia ready */ /*(19) is dreq1 */ /*(20) is dreq0 */ #define H5000_GPIO_OE_RD_NWR (21) /* output enable on rd/nwr signal to companion asic */ /*(22) is not connected */ #define H5000_GPIO_OPT_SPI_CLK (23) /* to extension pack */ #define H5000_GPIO_OPT_SPI_CS_N (24) /* to extension pack */ #define H5000_GPIO_OPT_SPI_DOUT (25) /* to extension pack */ #define H5000_GPIO_OPT_SPI_DIN (26) /* to extension pack */ /*(27) not connected */ #define H5000_GPIO_I2S_BITCLK (28) /* connected to AC97 codec */ #define H5000_GPIO_I2S_DATAOUT (29) /* connected to AC97 codec */ #define H5000_GPIO_I2S_DATAIN (30) /* connected to AC97 codec */ #define H5000_GPIO_I2S_LRCLK (31) /* connected to AC97 codec */ #define H5000_GPIO_I2S_SYSCLK (32) /* connected to AC97 codec */ /*(33) is CS5# */ #define H5000_GPIO_COM_RXD (34) /* connected to cradle/cable connector */ #define H5000_GPIO_COM_CTS (35) /* connected to cradle/cable connector */ #define H5000_GPIO_COM_DCD (36) /* connected to cradle/cable connector */ #define H5000_GPIO_COM_DSR (37) /* connected to cradle/cable connector */ #define H5000_GPIO_COM_RI (38) /* connected to cradle/cable connector */ #define H5000_GPIO_COM_TXD (39) /* connected to cradle/cable connector */ #define H5000_GPIO_COM_DTR (40) /* connected to cradle/cable connector */ #define H5000_GPIO_COM_RTS (41) /* connected to cradle/cable connector */ #define H5000_GPIO_BT_RXD (42) /* connected to BT (LMX9814) */ #define H5000_GPIO_BT_TXD (43) /* connected to BT (LMX9814) */ #define H5000_GPIO_BT_CTS (44) /* connected to BT (LMX9814) */ #define H5000_GPIO_BT_RTS (45) /* connected to BT (LMX9814) */ #define H5000_GPIO_IRDA_RXD (46) #define H5000_GPIO_IRDA_TXD (47) #define H5000_GPIO_POE_N (48) /* used for pcmcia */ #define H5000_GPIO_PWE_N (49) /* used for pcmcia */ #define H5000_GPIO_PIOR_N (50) /* used for pcmcia */ #define H5000_GPIO_PIOW_N (51) /* used for pcmcia */ #define H5000_GPIO_PCE1_N (52) /* used for pcmcia */ #define H5000_GPIO_PCE2_N (53) /* used for pcmcia */ #define H5000_GPIO_PSKTSEL (54) /* used for pcmcia */ #define H5000_GPIO_PREG_N (55) /* used for pcmcia */ #define H5000_GPIO_PWAIT_N (56) /* used for pcmcia */ #define H5000_GPIO_IOIS16_N (57) /* used for pcmcia */ #define H5000_GPIO_IRDA_SD (58) /* to hsdl3002 sd */ /*(59) not connected */ #define H5000_GPIO_POWER_SD_N (60) /* controls power to SD */ #define H5000_GPIO_POWER_RS232_N (61) /* inverted FORCEON to rs232 transceiver */ #define H5000_GPIO_POWER_ACCEL_N (62) /* controls power to accel */ /*(63) is not connected */ #define H5000_GPIO_OPT_NVRAM (64) /* controls power to expansion pack */ #define H5000_GPIO_CHG_EN (65) /* to sc801 en */ #define H5000_GPIO_USB_PULLUP (66) /* USB d+ pullup via 1.5K resistor */ #define H5000_GPIO_BT_2V8_N (67) /* 2.8V used by bluetooth */ #define H5000_GPIO_EXT_CHG_RATE (68) /* enables external charging rate */ /*(69) is not connected */ #define H5000_GPIO_CIR_RESET (70) /* consumer IR reset */ #define H5000_GPIO_POWER_LIGHT_SENSOR_N (71) #define H5000_GPIO_BT_M_RESET (72) #define H5000_GPIO_STD_CHG_RATE (73) #define H5000_GPIO_SD_WP_N (74) #define H5000_GPIO_MOTOR_ON_N (75) /* external pullup on this */ #define H5000_GPIO_HEADPHONE_DETECT (76) #define H5000_GPIO_USB_CHG_RATE (77) /* select rate for charging via usb */ /*(78) is CS2# */ /*(79) is CS3# */ /*(80) is CS4# */ #endif /* __ASM_ARCH_H5000_H */Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Anton Vorontsov | 334 | 99.70% | 1 | 50.00% |
| Arnd Bergmann | 1 | 0.30% | 1 | 50.00% |
| Total | 335 | 100.00% | 2 | 100.00% |