cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-pxa/poodle.c

/*
 * linux/arch/arm/mach-pxa/poodle.c
 *
 *  Support for the SHARP Poodle Board.
 *
 * Based on:
 *  linux/arch/arm/mach-pxa/lubbock.c Author:   Nicolas Pitre
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  published by the Free Software Foundation.
 *
 * Change Log
 *  12-Dec-2002 Sharp Corporation for Poodle
 *  John Lenz <lenz@cs.wisc.edu> updates to 2.6
 */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/pm.h>
#include <linux/delay.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c/pxa-i2c.h>
#include <linux/regulator/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/memblock.h>

#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/setup.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include "pxa25x.h"
#include <linux/platform_data/mmc-pxamci.h>
#include "udc.h"
#include <linux/platform_data/irda-pxaficp.h>
#include <mach/poodle.h>
#include <linux/platform_data/video-pxafb.h>

#include <asm/hardware/scoop.h>
#include <asm/hardware/locomo.h>
#include <asm/mach/sharpsl_param.h>

#include "generic.h"
#include "devices.h"


static unsigned long poodle_pin_config[] __initdata = {
	/* I/O */
	GPIO79_nCS_3,
	GPIO80_nCS_4,
	GPIO18_RDY,

	/* Clock */
	GPIO12_32KHz,

	/* SSP1 */
	GPIO23_SSP1_SCLK,
	GPIO25_SSP1_TXD,
	GPIO26_SSP1_RXD,
	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */

	/* I2S */
	GPIO28_I2S_BITCLK_OUT,
	GPIO29_I2S_SDATA_IN,
	GPIO30_I2S_SDATA_OUT,
	GPIO31_I2S_SYNC,
	GPIO32_I2S_SYSCLK,

	/* Infra-Red */
	GPIO47_FICP_TXD,
	GPIO46_FICP_RXD,

	/* FFUART */
	GPIO40_FFUART_DTR,
	GPIO41_FFUART_RTS,
	GPIO39_FFUART_TXD,
	GPIO37_FFUART_DSR,
	GPIO34_FFUART_RXD,
	GPIO35_FFUART_CTS,

	/* LCD */
	GPIOxx_LCD_TFT_16BPP,

	/* PC Card */
	GPIO48_nPOE,
	GPIO49_nPWE,
	GPIO50_nPIOR,
	GPIO51_nPIOW,
	GPIO52_nPCE_1,
	GPIO53_nPCE_2,
	GPIO54_nPSKTSEL,
	GPIO55_nPREG,
	GPIO56_nPWAIT,
	GPIO57_nIOIS16,

	/* MMC */
	GPIO6_MMC_CLK,
	GPIO8_MMC_CS0,

	/* GPIO */
	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */

	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
};


static struct resource poodle_scoop_resources[] = {
	[0] = {
		.start		= 0x10800000,
		.end		= 0x10800fff,
		.flags		= IORESOURCE_MEM,
        },
};


static struct scoop_config poodle_scoop_setup = {
	.io_dir		= POODLE_SCOOP_IO_DIR,
	.io_out		= POODLE_SCOOP_IO_OUT,
	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
};


struct platform_device poodle_scoop_device = {
	.name		= "sharp-scoop",
	.id		= -1,
	.dev		= {
		.platform_data	= &poodle_scoop_setup,
        },
	.num_resources	= ARRAY_SIZE(poodle_scoop_resources),
	.resource	= poodle_scoop_resources,
};


static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
{
	.dev        = &poodle_scoop_device.dev,
	.irq        = POODLE_IRQ_GPIO_CF_IRQ,
	.cd_irq     = POODLE_IRQ_GPIO_CF_CD,
	.cd_irq_str = "PCMCIA0 CD",
},
};


static struct scoop_pcmcia_config poodle_pcmcia_config = {
	.devs         = &poodle_pcmcia_scoop[0],
	.num_devs     = 1,
};


EXPORT_SYMBOL(poodle_scoop_device);



static struct platform_device poodle_audio_device = {
	.name	= "poodle-audio",
	.id	= -1,
};

/* LoCoMo device */

static struct resource locomo_resources[] = {
	[0] = {
		.start		= 0x10000000,
		.end		= 0x10001fff,
		.flags		= IORESOURCE_MEM,
        },
	[1] = {
		.start		= PXA_GPIO_TO_IRQ(10),
		.end		= PXA_GPIO_TO_IRQ(10),
		.flags		= IORESOURCE_IRQ,
        },
};


static struct locomo_platform_data locomo_info = {
	.irq_base	= IRQ_BOARD_START,
};


struct platform_device poodle_locomo_device = {
	.name		= "locomo",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(locomo_resources),
	.resource	= locomo_resources,
	.dev		= {
		.platform_data	= &locomo_info,
        },
};


EXPORT_SYMBOL(poodle_locomo_device);

#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)

static struct pxa2xx_spi_master poodle_spi_info = {
	.num_chipselect	= 1,
};


static struct ads7846_platform_data poodle_ads7846_info = {
	.model			= 7846,
	.vref_delay_usecs	= 100,
	.x_plate_ohms		= 419,
	.y_plate_ohms		= 486,
	.gpio_pendown		= POODLE_GPIO_TP_INT,
};


static struct pxa2xx_spi_chip poodle_ads7846_chip = {
	.gpio_cs		= POODLE_GPIO_TP_CS,
};


static struct spi_board_info poodle_spi_devices[] = {
	{
		.modalias	= "ads7846",
		.max_speed_hz	= 10000,
		.bus_num	= 1,
		.platform_data	= &poodle_ads7846_info,
		.controller_data= &poodle_ads7846_chip,
		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
        },
};


static void __init poodle_init_spi(void) { pxa2xx_set_spi_info(1, &poodle_spi_info); spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices)); }

Contributors

PersonTokensPropCommitsCommitProp
Eric Miao25100.00%1100.00%
Total25100.00%1100.00%

#else
static inline void poodle_init_spi(void) {}

Contributors

PersonTokensPropCommitsCommitProp
Eric Miao8100.00%1100.00%
Total8100.00%1100.00%

#endif /* * MMC/SD Device * * The card detect interrupt isn't debounced so we delay it by 250ms * to give the card a chance to fully insert/eject. */
static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data) { int err; err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR"); if (err) goto err_free_2; err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1"); if (err) goto err_free_3; gpio_direction_output(POODLE_GPIO_SD_PWR, 0); gpio_direction_output(POODLE_GPIO_SD_PWR1, 0); return 0; err_free_3: gpio_free(POODLE_GPIO_SD_PWR); err_free_2: return err; }

Contributors

PersonTokensPropCommitsCommitProp
Eric Miao5060.98%120.00%
Richard Purdie3036.59%240.00%
Russell King11.22%120.00%
David Howells11.22%120.00%
Total82100.00%5100.00%


static int poodle_mci_setpower(struct device *dev, unsigned int vdd) { struct pxamci_platform_data* p_d = dev->platform_data; if ((1 << vdd) & p_d->ocr_mask) { gpio_set_value(POODLE_GPIO_SD_PWR, 1); mdelay(2); gpio_set_value(POODLE_GPIO_SD_PWR1, 1); } else { gpio_set_value(POODLE_GPIO_SD_PWR1, 0); gpio_set_value(POODLE_GPIO_SD_PWR, 0); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Richard Purdie6179.22%250.00%
Eric Miao1215.58%125.00%
Arnd Bergmann45.19%125.00%
Total77100.00%4100.00%


static void poodle_mci_exit(struct device *dev, void *data) { gpio_free(POODLE_GPIO_SD_PWR1); gpio_free(POODLE_GPIO_SD_PWR); }

Contributors

PersonTokensPropCommitsCommitProp
Richard Purdie1560.00%150.00%
Eric Miao1040.00%150.00%
Total25100.00%2100.00%

static struct pxamci_platform_data poodle_mci_platform_data = { .detect_delay_ms = 250, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .init = poodle_mci_init, .setpower = poodle_mci_setpower, .exit = poodle_mci_exit, .gpio_card_detect = POODLE_GPIO_nSD_DETECT, .gpio_card_ro = POODLE_GPIO_nSD_WP, .gpio_power = -1, }; /* * Irda */ static struct pxaficp_platform_data poodle_ficp_platform_data = { .gpio_pwdown = POODLE_GPIO_IR_ON, .transceiver_cap = IR_SIRMODE | IR_OFF, }; /* * USB Device Controller */ static struct pxa2xx_udc_mach_info udc_info __initdata = { /* no connect GPIO; poodle can't tell connection status */ .gpio_pullup = POODLE_GPIO_USB_PULLUP, }; /* PXAFB device */ static struct pxafb_mode_info poodle_fb_mode = { .pixclock = 144700, .xres = 320, .yres = 240, .bpp = 16, .hsync_len = 7, .left_margin = 11, .right_margin = 30, .vsync_len = 2, .upper_margin = 2, .lower_margin = 0, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, }; static struct pxafb_mach_info poodle_fb_info = { .modes = &poodle_fb_mode, .num_modes = 1, .lcd_conn = LCD_COLOR_TFT_16BPP, }; static struct mtd_partition sharpsl_nand_partitions[] = { { .name = "System Area", .offset = 0, .size = 7 * 1024 * 1024, }, { .name = "Root Filesystem", .offset = 7 * 1024 * 1024, .size = 22 * 1024 * 1024, }, { .name = "Home Filesystem", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, }; static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; static struct nand_bbt_descr sharpsl_bbt = { .options = 0, .offs = 4, .len = 2, .pattern = scan_ff_pattern }; static struct sharpsl_nand_platform_data sharpsl_nand_platform_data = { .badblock_pattern = &sharpsl_bbt, .partitions = sharpsl_nand_partitions, .nr_partitions = ARRAY_SIZE(sharpsl_nand_partitions), }; static struct resource sharpsl_nand_resources[] = { { .start = 0x0C000000, .end = 0x0C000FFF, .flags = IORESOURCE_MEM, }, }; static struct platform_device sharpsl_nand_device = { .name = "sharpsl-nand", .id = -1, .resource = sharpsl_nand_resources, .num_resources = ARRAY_SIZE(sharpsl_nand_resources), .dev.platform_data = &sharpsl_nand_platform_data, }; static struct mtd_partition sharpsl_rom_parts[] = { { .name ="Boot PROM Filesystem", .offset = 0x00120000, .size = MTDPART_SIZ_FULL, }, }; static struct physmap_flash_data sharpsl_rom_data = { .width = 2, .nr_parts = ARRAY_SIZE(sharpsl_rom_parts), .parts = sharpsl_rom_parts, }; static struct resource sharpsl_rom_resources[] = { { .start = 0x00000000, .end = 0x007fffff, .flags = IORESOURCE_MEM, }, }; static struct platform_device sharpsl_rom_device = { .name = "physmap-flash", .id = -1, .resource = sharpsl_rom_resources, .num_resources = ARRAY_SIZE(sharpsl_rom_resources), .dev.platform_data = &sharpsl_rom_data, }; static struct platform_device *devices[] __initdata = { &poodle_locomo_device, &poodle_scoop_device, &poodle_audio_device, &sharpsl_nand_device, &sharpsl_rom_device, }; static struct i2c_board_info __initdata poodle_i2c_devices[] = { { I2C_BOARD_INFO("wm8731", 0x1b) }, };
static void poodle_poweroff(void) { pxa_restart(REBOOT_HARD, NULL); }

Contributors

PersonTokensPropCommitsCommitProp
Richard Purdie1173.33%125.00%
Russell King320.00%250.00%
Robin Holt16.67%125.00%
Total15100.00%4100.00%


static void __init poodle_init(void) { int ret = 0; pm_power_off = poodle_poweroff; PCFR |= PCFR_OPDE; pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); platform_scoop_config = &poodle_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) pr_warn("poodle: Unable to register LoCoMo device\n"); pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info); pxa_set_udc_info(&udc_info); pxa_set_mci_info(&poodle_mci_platform_data); pxa_set_ficp_info(&poodle_ficp_platform_data); pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(poodle_i2c_devices)); poodle_init_spi(); regulator_has_full_constraints(); }

Contributors

PersonTokensPropCommitsCommitProp
Eric Miao3528.93%320.00%
Richard Purdie3125.62%533.33%
John Lenz1915.70%16.67%
Russell King1714.05%213.33%
Mark Brown1512.40%213.33%
Dmitry Baryshkov32.48%16.67%
Joe Perches10.83%16.67%
Total121100.00%15100.00%


static void __init fixup_poodle(struct tag *tags, char **cmdline) { sharpsl_save_param(); memblock_add(0xa0000000, SZ_32M); }

Contributors

PersonTokensPropCommitsCommitProp
Richard Purdie2281.48%266.67%
Laura Abbott518.52%133.33%
Total27100.00%3100.00%

MACHINE_START(POODLE, "SHARP Poodle") .fixup = fixup_poodle, .map_io = pxa25x_map_io, .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */ .init_irq = pxa25x_init_irq, .handle_irq = pxa25x_handle_irq, .init_time = pxa_timer_init, .init_machine = poodle_init, .restart = pxa_restart, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Richard Purdie38924.78%1118.33%
Eric Miao35722.74%1423.33%
John Lenz32920.96%11.67%
Dmitry Baryshkov32920.96%35.00%
Russell King442.80%915.00%
Mark Brown362.29%23.33%
Axel Lin211.34%11.67%
Robert Jarzmik150.96%11.67%
Arnd Bergmann90.57%35.00%
Haojian Zhuang90.57%35.00%
Laura Abbott80.51%11.67%
Sebastian Andrzej Siewior60.38%23.33%
Marek Vašut60.38%23.33%
Paul Gortmaker30.19%11.67%
Stephen Warren20.13%11.67%
Mike Rapoport20.13%11.67%
David Woodhouse20.13%11.67%
Joe Perches10.06%11.67%
David Howells10.06%11.67%
Robin Holt10.06%11.67%
Total1570100.00%60100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.