cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-s3c24xx/mach-anubis.c

/* linux/arch/arm/mach-s3c2440/mach-anubis.c
 *
 * Copyright 2003-2009 Simtec Electronics
 *      http://armlinux.simtec.co.uk/
 *      Ben Dooks <ben@simtec.co.uk>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>

#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>

#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>

#include <net/ax88796.h>

#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
#include <plat/samsung-time.h>

#include "anubis.h"
#include "common.h"
#include "simtec.h"


#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"


static struct map_desc anubis_iodesc[] __initdata = {
  /* ISA IO areas */

  {
	.virtual	= (u32)S3C24XX_VA_ISA_BYTE,
	.pfn		= __phys_to_pfn(0x0),
	.length		= SZ_4M,
	.type		= MT_DEVICE,
  }, {
	.virtual	= (u32)S3C24XX_VA_ISA_WORD,
	.pfn		= __phys_to_pfn(0x0),
	.length 	= SZ_4M,
	.type		= MT_DEVICE,
  },

  /* we could possibly compress the next set down into a set of smaller tables
   * pagetables, but that would mean using an L2 section, and it still means
   * we cannot actually feed the same register to an LDR due to 16K spacing
   */

  /* CPLD control registers */

  {
	.virtual	= (u32)ANUBIS_VA_CTRL1,
	.pfn		= __phys_to_pfn(ANUBIS_PA_CTRL1),
	.length		= SZ_4K,
	.type		= MT_DEVICE,
  }, {
	.virtual	= (u32)ANUBIS_VA_IDREG,
	.pfn		= __phys_to_pfn(ANUBIS_PA_IDREG),
	.length		= SZ_4K,
	.type		= MT_DEVICE,
  },
};


#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK

#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB

#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE


static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
	[0] = {
		.hwport	     = 0,
		.flags	     = 0,
		.ucon	     = UCON,
		.ulcon	     = ULCON,
		.ufcon	     = UFCON,
		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
        },
	[1] = {
		.hwport	     = 2,
		.flags	     = 0,
		.ucon	     = UCON,
		.ulcon	     = ULCON,
		.ufcon	     = UFCON,
		.clk_sel	= S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
        },
};

/* NAND Flash on Anubis board */


static int external_map[]   = { 2 };

static int chip0_map[]      = { 0 };

static int chip1_map[]      = { 1 };


static struct mtd_partition __initdata anubis_default_nand_part[] = {
	[0] = {
		.name	= "Boot Agent",
		.size	= SZ_16K,
		.offset	= 0,
        },
	[1] = {
		.name	= "/boot",
		.size	= SZ_4M - SZ_16K,
		.offset	= SZ_16K,
        },
	[2] = {
		.name	= "user1",
		.offset	= SZ_4M,
		.size	= SZ_32M - SZ_4M,
        },
	[3] = {
		.name	= "user2",
		.offset	= SZ_32M,
		.size	= MTDPART_SIZ_FULL,
        }
};


static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
	[0] = {
		.name	= "Boot Agent",
		.size	= SZ_128K,
		.offset	= 0,
        },
	[1] = {
		.name	= "/boot",
		.size	= SZ_4M - SZ_128K,
		.offset	= SZ_128K,
        },
	[2] = {
		.name	= "user1",
		.offset	= SZ_4M,
		.size	= SZ_32M - SZ_4M,
        },
	[3] = {
		.name	= "user2",
		.offset	= SZ_32M,
		.size	= MTDPART_SIZ_FULL,
        }
};

/* the Anubis has 3 selectable slots for nand-flash, the two
 * on-board chip areas, as well as the external slot.
 *
 * Note, there is no current hot-plug support for the External
 * socket.
*/


static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
	[1] = {
		.name		= "External",
		.nr_chips	= 1,
		.nr_map		= external_map,
		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
		.partitions	= anubis_default_nand_part,
        },
	[0] = {
		.name		= "chip0",
		.nr_chips	= 1,
		.nr_map		= chip0_map,
		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
		.partitions	= anubis_default_nand_part,
        },
	[2] = {
		.name		= "chip1",
		.nr_chips	= 1,
		.nr_map		= chip1_map,
		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
		.partitions	= anubis_default_nand_part,
        },
};


static void anubis_nand_select(struct s3c2410_nand_set *set, int slot) { unsigned int tmp; slot = set->nr_map[slot] & 3; pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n", slot, set, set->nr_map); tmp = __raw_readb(ANUBIS_VA_CTRL1); tmp &= ~ANUBIS_CTRL1_NANDSEL; tmp |= slot; pr_debug("anubis_nand: ctrl1 now %02x\n", tmp); __raw_writeb(tmp, ANUBIS_VA_CTRL1); }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks72100.00%1100.00%
Total72100.00%1100.00%

static struct s3c2410_platform_nand __initdata anubis_nand_info = { .tacls = 25, .twrph0 = 55, .twrph1 = 40, .nr_sets = ARRAY_SIZE(anubis_nand_sets), .sets = anubis_nand_sets, .select_chip = anubis_nand_select, .ecc_mode = NAND_ECC_SOFT, }; /* IDE channels */ static struct pata_platform_info anubis_ide_platdata = { .ioport_shift = 5, }; static struct resource anubis_ide0_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32), [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32), [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0), }; static struct platform_device anubis_device_ide0 = { .name = "pata_platform", .id = 0, .num_resources = ARRAY_SIZE(anubis_ide0_resource), .resource = anubis_ide0_resource, .dev = { .platform_data = &anubis_ide_platdata, .coherent_dma_mask = ~0, }, }; static struct resource anubis_ide1_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32), [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32), [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0), }; static struct platform_device anubis_device_ide1 = { .name = "pata_platform", .id = 1, .num_resources = ARRAY_SIZE(anubis_ide1_resource), .resource = anubis_ide1_resource, .dev = { .platform_data = &anubis_ide_platdata, .coherent_dma_mask = ~0, }, }; /* Asix AX88796 10/100 ethernet controller */ static struct ax_plat_data anubis_asix_platdata = { .flags = AXFLG_MAC_FROMDEV, .wordlength = 2, .dcr_val = 0x48, .rcr_val = 0x40, }; static struct resource anubis_asix_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20), [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX), }; static struct platform_device anubis_device_asix = { .name = "ax88796", .id = 0, .num_resources = ARRAY_SIZE(anubis_asix_resource), .resource = anubis_asix_resource, .dev = { .platform_data = &anubis_asix_platdata, } }; /* SM501 */ static struct resource anubis_sm501_resource[] = { [0] = DEFINE_RES_MEM(S3C2410_CS2, SZ_8M), [1] = DEFINE_RES_MEM(S3C2410_CS2 + SZ_64M - SZ_2M, SZ_2M), [2] = DEFINE_RES_IRQ(IRQ_EINT0), }; static struct sm501_initdata anubis_sm501_initdata = { .gpio_high = { .set = 0x3F000000, /* 24bit panel */ .mask = 0x0, }, .misc_timing = { .set = 0x010100, /* SDRAM timing */ .mask = 0x1F1F00, }, .misc_control = { .set = SM501_MISC_PNL_24BIT, .mask = 0, }, .devices = SM501_USE_GPIO, /* set the SDRAM and bus clocks */ .mclk = 72 * MHZ, .m1xclk = 144 * MHZ, }; static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = { [0] = { .bus_num = 1, .pin_scl = 44, .pin_sda = 45, }, [1] = { .bus_num = 2, .pin_scl = 40, .pin_sda = 41, }, }; static struct sm501_platdata anubis_sm501_platdata = { .init = &anubis_sm501_initdata, .gpio_base = -1, .gpio_i2c = anubis_sm501_gpio_i2c, .gpio_i2c_nr = ARRAY_SIZE(anubis_sm501_gpio_i2c), }; static struct platform_device anubis_device_sm501 = { .name = "sm501", .id = 0, .num_resources = ARRAY_SIZE(anubis_sm501_resource), .resource = anubis_sm501_resource, .dev = { .platform_data = &anubis_sm501_platdata, }, }; /* Standard Anubis devices */ static struct platform_device *anubis_devices[] __initdata = { &s3c2410_device_dclk, &s3c_device_ohci, &s3c_device_wdt, &s3c_device_adc, &s3c_device_i2c0, &s3c_device_rtc, &s3c_device_nand, &anubis_device_ide0, &anubis_device_ide1, &anubis_device_asix, &anubis_device_sm501, }; /* I2C devices. */ static struct i2c_board_info anubis_i2c_devs[] __initdata = { { I2C_BOARD_INFO("tps65011", 0x48), .irq = IRQ_EINT20, } }; /* Audio setup */ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = { .have_mic = 1, .have_lout = 1, .output_cdclk = 1, .use_mpllin = 1, .amp_gpio = S3C2410_GPB(2), .amp_gain[0] = S3C2410_GPD(10), .amp_gain[1] = S3C2410_GPD(11), };
static void __init anubis_map_io(void) { s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc)); s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs)); samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4); /* check for the newer revision boards with large page nand */ if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) { printk(KERN_INFO "ANUBIS-B detected (revision %d)\n", __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK); anubis_nand_sets[0].partitions = anubis_default_nand_part_large; anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large); } else { /* ensure that the GPIO is setup */ gpio_request_one(S3C2410_GPA(0), GPIOF_OUT_INIT_HIGH, NULL); gpio_free(S3C2410_GPA(0)); } }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks9182.73%466.67%
Sylwester Nawrocki1210.91%116.67%
Romain Naour76.36%116.67%
Total110100.00%6100.00%


static void __init anubis_init_time(void) { s3c2440_init_clocks(12000000); samsung_timer_init(); }

Contributors

PersonTokensPropCommitsCommitProp
Heiko Stübner17100.00%1100.00%
Total17100.00%1100.00%


static void __init anubis_init(void) { s3c_i2c0_set_platdata(NULL); s3c_nand_set_platdata(&anubis_nand_info); simtec_audio_add(NULL, false, &anubis_audio); platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); i2c_register_board_info(0, anubis_i2c_devs, ARRAY_SIZE(anubis_i2c_devs)); }

Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks52100.00%5100.00%
Total52100.00%5100.00%

MACHINE_START(ANUBIS, "Simtec-Anubis") /* Maintainer: Ben Dooks <ben@simtec.co.uk> */ .atag_offset = 0x100, .map_io = anubis_map_io, .init_machine = anubis_init, .init_irq = s3c2440_init_irq, .init_time = anubis_init_time, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Ben Dooks153791.27%2656.52%
Tushar Behera633.74%24.35%
Heiko Stübner241.43%48.70%
Sylwester Nawrocki120.71%12.17%
Kukjin Kim100.59%24.35%
Romain Naour100.59%12.17%
Thomas Abraham80.48%12.17%
Russell King70.42%36.52%
Linus Walleij50.30%24.35%
Sergio Prado50.30%12.17%
Arnd Bergmann10.06%12.17%
Nico Pitre10.06%12.17%
Stephen Warren10.06%12.17%
Total1684100.00%46100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.