cregit-Linux how code gets into the kernel

Release 4.11 arch/arm/mach-sa1100/h3100.c

/*
 * Support for Compaq iPAQ H3100 handheld computer
 *
 * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
 * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/gpio.h>

#include <video/sa1100fb.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/platform_data/irda-sa11x0.h>

#include <mach/h3xxx.h>
#include <mach/irqs.h>

#include "generic.h"

/*
 * helper for sa1100fb
 */

static struct gpio h3100_lcd_gpio[] = {
	{ H3100_GPIO_LCD_3V_ON, GPIOF_OUT_INIT_LOW, "LCD 3V" },
	{ H3XXX_EGPIO_LCD_ON, GPIOF_OUT_INIT_LOW, "LCD ON" },
};


static bool h3100_lcd_request(void) { static bool h3100_lcd_ok; int rc; if (h3100_lcd_ok) return true; rc = gpio_request_array(h3100_lcd_gpio, ARRAY_SIZE(h3100_lcd_gpio)); if (rc) pr_err("%s: can't request GPIOs\n", __func__); else h3100_lcd_ok = true; return h3100_lcd_ok; }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Baryshkov53100.00%1100.00%
Total53100.00%1100.00%


static void h3100_lcd_power(int enable) { if (!h3100_lcd_request()) return; gpio_set_value(H3100_GPIO_LCD_3V_ON, enable); gpio_set_value(H3XXX_EGPIO_LCD_ON, enable); }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Artamonow2686.67%150.00%
Dmitry Baryshkov413.33%150.00%
Total30100.00%2100.00%

static struct sa1100fb_mach_info h3100_lcd_info = { .pixclock = 406977, .bpp = 4, .xres = 320, .yres = 240, .hsync_len = 26, .vsync_len = 41, .left_margin = 4, .upper_margin = 0, .right_margin = 4, .lower_margin = 0, .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, .cmap_greyscale = 1, .cmap_inverse = 1, .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas, .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), .lcd_power = h3100_lcd_power, };
static void __init h3100_map_io(void) { h3xxx_map_io(); /* Older bootldrs put GPIO2-9 in alternate mode on the assumption that they are used for video */ GAFR &= ~0x000001fb; }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Artamonow18100.00%1100.00%
Total18100.00%1100.00%

/* * This turns the IRDA power on or off on the Compaq H3100 */ static struct gpio h3100_irda_gpio[] = { { H3100_GPIO_IR_ON, GPIOF_OUT_INIT_LOW, "IrDA power" }, { H3100_GPIO_IR_FSEL, GPIOF_OUT_INIT_LOW, "IrDA fsel" }, };
static int h3100_irda_set_power(struct device *dev, unsigned int state) { gpio_set_value(H3100_GPIO_IR_ON, state); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Artamonow25100.00%1100.00%
Total25100.00%1100.00%


static void h3100_irda_set_speed(struct device *dev, unsigned int speed) { gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000)); }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Artamonow27100.00%1100.00%
Total27100.00%1100.00%


static int h3100_irda_startup(struct device *dev) { return gpio_request_array(h3100_irda_gpio, sizeof(h3100_irda_gpio)); }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Baryshkov22100.00%1100.00%
Total22100.00%1100.00%


static void h3100_irda_shutdown(struct device *dev) { return gpio_free_array(h3100_irda_gpio, sizeof(h3100_irda_gpio)); }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Baryshkov22100.00%1100.00%
Total22100.00%1100.00%

static struct irda_platform_data h3100_irda_data = { .set_power = h3100_irda_set_power, .set_speed = h3100_irda_set_speed, .startup = h3100_irda_startup, .shutdown = h3100_irda_shutdown, };
static void __init h3100_mach_init(void) { h3xxx_mach_init(); sa11x0_register_lcd(&h3100_lcd_info); sa11x0_register_irda(&h3100_irda_data); }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Artamonow1875.00%150.00%
Russell King625.00%150.00%
Total24100.00%2100.00%

MACHINE_START(H3100, "Compaq iPAQ H3100") .atag_offset = 0x100, .map_io = h3100_map_io, .nr_irqs = SA1100_NR_IRQS, .init_irq = sa1100_init_irq, .init_time = sa1100_timer_init, .init_machine = h3100_mach_init, .init_late = sa11x0_init_late, .restart = sa11x0_restart, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Dmitry Artamonow18538.70%216.67%
Dmitry Baryshkov16033.47%325.00%
Russell King11624.27%325.00%
Rob Herring81.67%18.33%
Shawn Guo51.05%18.33%
Stephen Warren20.42%18.33%
Nico Pitre20.42%18.33%
Total478100.00%12100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.