Release 4.11 arch/arm/mach-ux500/cpu-db8500.c

/*
 * Copyright (C) 2008-2009 ST-Ericsson SA
 *
 * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2, as
 * published by the Free Software Foundation.
 *
 */
#include <linux/types.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/arm-ux500-pm.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/perf/arm_pmu.h>
#include <linux/regulator/machine.h>

#include <asm/outercache.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>

#include "db8500-regs.h"



static int __init ux500_l2x0_unlock(void)
{
	int i;
	struct device_node *np;
	void __iomem *l2x0_base;

	np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache");
	l2x0_base = of_iomap(np, 0);
	of_node_put(np);
	if (!l2x0_base)
		return -ENODEV;

	/*
         * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions
         * apparently locks both caches before jumping to the kernel. The
         * l2x0 core will not touch the unlock registers if the l2x0 is
         * already enabled, so we do it right here instead. The PL310 has
         * 8 sets of registers, one per possible CPU.
         */
	for (i = 0; i < 8; i++) {
		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE +
			       i * L2X0_LOCKDOWN_STRIDE);
		writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE +
			       i * L2X0_LOCKDOWN_STRIDE);
	}
	iounmap(l2x0_base);
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Arnd Bergmann
106
100.00%
1
100.00%
Total
106
100.00%
1
100.00%



static void ux500_l2c310_write_sec(unsigned long val, unsigned reg)
{
	/*
         * We can't write to secure registers as we are in non-secure
         * mode, until we have some SMI service available.
         */
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Arnd Bergmann
14
100.00%
1
100.00%
Total
14
100.00%
1
100.00%

/*
 * FIXME: Should we set up the GPIO domain here?
 *
 * The problem is that we cannot put the interrupt resources into the platform
 * device until the irqdomain has been added. Right now, we set the GIC interrupt
 * domain from init_irq(), then load the gpio driver from
 * core_initcall(nmk_gpio_init) and add the platform devices from
 * arch_initcall(customize_machine).
 *
 * This feels fragile because it depends on the gpio device getting probed
 * _before_ any device uses the gpio interrupts.
*/


static void __init ux500_init_irq(void)
{
	struct device_node *np;
	struct resource r;

	irqchip_init();
	np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu");
	of_address_to_resource(np, 0, &r);
	of_node_put(np);
	if (!r.start) {
		pr_err("could not find PRCMU base resource\n");
		return;
	}
	prcmu_early_init(r.start, r.end-r.start);
	ux500_pm_init(r.start, r.end-r.start);

	/* Unlock before init */
	ux500_l2x0_unlock();
	outer_cache.write_sec = ux500_l2c310_write_sec;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Arnd Bergmann
102
100.00%
1
100.00%
Total
102
100.00%
1
100.00%



static void ux500_restart(enum reboot_mode mode, const char *cmd)
{
	local_irq_disable();
	local_fiq_disable();

	prcmu_system_reset(0);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Arnd Bergmann
26
100.00%
1
100.00%
Total
26
100.00%
1
100.00%

/*
 * The PMU IRQ lines of two cores are wired together into a single interrupt.
 * Bounce the interrupt to the other core if it's not ours.
 */


static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
{
	irqreturn_t ret = handler(irq, dev);
	int other = !smp_processor_id();

	if (ret == IRQ_NONE && cpu_online(other))
		irq_set_affinity(irq, cpumask_of(other));

	/*
         * We should be able to get away with the amount of IRQ_NONEs we give,
         * while still having the spurious IRQ detection code kick in if the
         * interrupt really starts hitting spuriously.
         */
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Rabin Vincent
58
100.00%
1
100.00%
Total
58
100.00%
1
100.00%


static struct arm_pmu_platdata db8500_pmu_platdata = {
	.handle_irq		= db8500_pmu_handler,
};


static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
	/* Requires call-back bindings. */
	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
	{},
};


static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = {
	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL),
	{},
};


static const struct of_device_id u8500_local_bus_nodes[] = {
	/* only create devices below soc node */
	{ .compatible = "stericsson,db8500", },
	{ .compatible = "stericsson,db8500-prcmu", },
	{ .compatible = "simple-bus"},
	{ },
};



static void __init u8500_init_machine(void)
{
	/* automatically probe child nodes of dbx5x0 devices */
	if (of_machine_is_compatible("st-ericsson,u8540"))
		of_platform_populate(NULL, u8500_local_bus_nodes,
				     u8540_auxdata_lookup, NULL);
	else
		of_platform_populate(NULL, u8500_local_bus_nodes,
				     u8500_auxdata_lookup, NULL);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Lee Jones
38
95.00%
2
66.67%
Arnd Bergmann
2
5.00%
1
33.33%
Total
40
100.00%
3
100.00%


static const char * stericsson_dt_platform_compat[] = {
	"st-ericsson,u8500",
	"st-ericsson,u8540",
	"st-ericsson,u9500",
	"st-ericsson,u9540",
	NULL,
};

DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
	.l2c_aux_val    = 0,
	.l2c_aux_mask	= ~0,
	.init_irq	= ux500_init_irq,
	.init_machine	= u8500_init_machine,
	.dt_compat      = stericsson_dt_platform_compat,
	.restart        = ux500_restart,
MACHINE_END
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Arnd Bergmann
287
50.98%
4
21.05%
Lee Jones
164
29.13%
6
31.58%
Rabin Vincent
78
13.85%
2
10.53%
Srinidhi Kasagar
22
3.91%
1
5.26%
Fabio Baltieri
5
0.89%
1
5.26%
Mark Rutland
2
0.36%
1
5.26%
Axel Lin
2
0.36%
1
5.26%
Linus Walleij
2
0.36%
2
10.53%
Sachin Kamat
1
0.18%
1
5.26%
Total
563
100.00%
19
100.00%
Directory: arch/arm/mach-ux500

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.