cregit-Linux how code gets into the kernel

Release 4.11 arch/m68k/coldfire/m5272.c

/***************************************************************************/

/*
 *      m5272.c  -- platform support for ColdFire 5272 based boards
 *
 *      Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
 *      Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
 */

/***************************************************************************/

#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfclk.h>

/***************************************************************************/

/*
 *      Some platforms need software versions of the GPIO data registers.
 */

unsigned short ppdata;

unsigned char ledbank = 0xff;

/***************************************************************************/

DEFINE_CLK(pll, "pll.0", MCF_CLK);
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
DEFINE_CLK(mcftmr0, "mcftmr.0", MCF_BUSCLK);
DEFINE_CLK(mcftmr1, "mcftmr.1", MCF_BUSCLK);
DEFINE_CLK(mcftmr2, "mcftmr.2", MCF_BUSCLK);
DEFINE_CLK(mcftmr3, "mcftmr.3", MCF_BUSCLK);
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);


struct clk *mcf_clks[] = {
	&clk_pll,
	&clk_sys,
	&clk_mcftmr0,
	&clk_mcftmr1,
	&clk_mcftmr2,
	&clk_mcftmr3,
	&clk_mcfuart0,
	&clk_mcfuart1,
	&clk_mcfqspi0,
	&clk_fec0,
	NULL
};

/***************************************************************************/


static void __init m5272_uarts_init(void) { u32 v; /* Enable the output lines for the serial ports */ v = readl(MCFSIM_PBCNT); v = (v & ~0x000000ff) | 0x00000055; writel(v, MCFSIM_PBCNT); v = readl(MCFSIM_PDCNT); v = (v & ~0x000003fc) | 0x000002a8; writel(v, MCFSIM_PDCNT); }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer63100.00%2100.00%
Total63100.00%2100.00%

/***************************************************************************/
static void m5272_cpu_reset(void) { local_irq_disable(); /* Set watchdog to reset, and enabled */ __raw_writew(0, MCFSIM_WIRR); __raw_writew(1, MCFSIM_WRRR); __raw_writew(0, MCFSIM_WCR); for (;;) /* wait for watchdog to timeout */; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer40100.00%1100.00%
Total40100.00%1100.00%

/***************************************************************************/
void __init config_BSP(char *commandp, int size) { #if defined (CONFIG_MOD5272) /* Set base of device vectors to be 64 */ writeb(0x40, MCFSIM_PIVR); #endif #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES) /* Copy command line from FLASH to local buffer... */ memcpy(commandp, (char *) 0xf0004000, size); commandp[size-1] = 0; #elif defined(CONFIG_CANCam) /* Copy command line from FLASH to local buffer... */ memcpy(commandp, (char *) 0xf0010000, size); commandp[size-1] = 0; #endif mach_reset = m5272_cpu_reset; mach_sched_init = hw_timer_init; }

Contributors

PersonTokensPropCommitsCommitProp
Alan Cox5553.92%114.29%
Greg Ungerer4746.08%685.71%
Total102100.00%7100.00%

/***************************************************************************/ /* * Some 5272 based boards have the FEC ethernet directly connected to * an ethernet switch. In this case we need to use the fixed phy type, * and we need to declare it early in boot. */ static struct fixed_phy_status nettel_fixed_phy_status __initdata = { .link = 1, .speed = 100, .duplex = 0, }; /***************************************************************************/
static int __init init_BSP(void) { m5272_uarts_init(); fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status, -1); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer2589.29%266.67%
Andrew Lunn310.71%133.33%
Total28100.00%3100.00%

arch_initcall(init_BSP); /***************************************************************************/

Overall Contributors

PersonTokensPropCommitsCommitProp
Greg Ungerer34978.08%1173.33%
Alan Cox8218.34%16.67%
Steven King122.68%16.67%
Andrew Lunn30.67%16.67%
Andrea Gelmini10.22%16.67%
Total447100.00%15100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.