Release 4.11 arch/parisc/include/uapi/asm/pdc.h
#ifndef _UAPI_PARISC_PDC_H
#define _UAPI_PARISC_PDC_H
/*
* PDC return values ...
* All PDC calls return a subset of these errors.
*/
#define PDC_WARN 3
/* Call completed with a warning */
#define PDC_REQ_ERR_1 2
/* See above */
#define PDC_REQ_ERR_0 1
/* Call would generate a requestor error */
#define PDC_OK 0
/* Call completed successfully */
#define PDC_BAD_PROC -1
/* Called non-existent procedure*/
#define PDC_BAD_OPTION -2
/* Called with non-existent option */
#define PDC_ERROR -3
/* Call could not complete without an error */
#define PDC_NE_MOD -5
/* Module not found */
#define PDC_NE_CELL_MOD -7
/* Cell module not found */
#define PDC_INVALID_ARG -10
/* Called with an invalid argument */
#define PDC_BUS_POW_WARN -12
/* Call could not complete in allowed power budget */
#define PDC_NOT_NARROW -17
/* Narrow mode not supported */
/*
* PDC entry points...
*/
#define PDC_POW_FAIL 1
/* perform a power-fail */
#define PDC_POW_FAIL_PREPARE 0
/* prepare for powerfail */
#define PDC_CHASSIS 2
/* PDC-chassis functions */
#define PDC_CHASSIS_DISP 0
/* update chassis display */
#define PDC_CHASSIS_WARN 1
/* return chassis warnings */
#define PDC_CHASSIS_DISPWARN 2
/* update&return chassis status */
#define PDC_RETURN_CHASSIS_INFO 128
/* HVERSION dependent: return chassis LED/LCD info */
#define PDC_PIM 3
/* Get PIM data */
#define PDC_PIM_HPMC 0
/* Transfer HPMC data */
#define PDC_PIM_RETURN_SIZE 1
/* Get Max buffer needed for PIM*/
#define PDC_PIM_LPMC 2
/* Transfer HPMC data */
#define PDC_PIM_SOFT_BOOT 3
/* Transfer Soft Boot data */
#define PDC_PIM_TOC 4
/* Transfer TOC data */
#define PDC_MODEL 4
/* PDC model information call */
#define PDC_MODEL_INFO 0
/* returns information */
#define PDC_MODEL_BOOTID 1
/* set the BOOT_ID */
#define PDC_MODEL_VERSIONS 2
/* returns cpu-internal versions*/
#define PDC_MODEL_SYSMODEL 3
/* return system model info */
#define PDC_MODEL_ENSPEC 4
/* enable specific option */
#define PDC_MODEL_DISPEC 5
/* disable specific option */
#define PDC_MODEL_CPU_ID 6
/* returns cpu-id (only newer machines!) */
#define PDC_MODEL_CAPABILITIES 7
/* returns OS32/OS64-flags */
/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
#define PDC_MODEL_OS64 (1 << 0)
#define PDC_MODEL_OS32 (1 << 1)
#define PDC_MODEL_IOPDIR_FDC (1 << 2)
#define PDC_MODEL_NVA_MASK (3 << 4)
#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
#define PDC_MODEL_NVA_SLOW (1 << 4)
#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
#define PDC_MODEL_GET_BOOT__OP 8
/* returns boot test options */
#define PDC_MODEL_SET_BOOT__OP 9
/* set boot test options */
#define PA89_INSTRUCTION_SET 0x4
/* capabilities returned */
#define PA90_INSTRUCTION_SET 0x8
#define PDC_CACHE 5
/* return/set cache (& TLB) info*/
#define PDC_CACHE_INFO 0
/* returns information */
#define PDC_CACHE_SET_COH 1
/* set coherence state */
#define PDC_CACHE_RET_SPID 2
/* returns space-ID bits */
#define PDC_HPA 6
/* return HPA of processor */
#define PDC_HPA_PROCESSOR 0
#define PDC_HPA_MODULES 1
#define PDC_COPROC 7
/* Co-Processor (usually FP unit(s)) */
#define PDC_COPROC_CFG 0
/* Co-Processor Cfg (FP unit(s) enabled?) */
#define PDC_IODC 8
/* talk to IODC */
#define PDC_IODC_READ 0
/* read IODC entry point */
/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */
#define PDC_IODC_RI_DATA_BYTES 0
/* IODC Data Bytes */
/* 1, 2 obsolete - HVERSION dependent*/
#define PDC_IODC_RI_INIT 3
/* Initialize module */
#define PDC_IODC_RI_IO 4
/* Module input/output */
#define PDC_IODC_RI_SPA 5
/* Module input/output */
#define PDC_IODC_RI_CONFIG 6
/* Module input/output */
/* 7 obsolete - HVERSION dependent */
#define PDC_IODC_RI_TEST 8
/* Module input/output */
#define PDC_IODC_RI_TLB 9
/* Module input/output */
#define PDC_IODC_NINIT 2
/* non-destructive init */
#define PDC_IODC_DINIT 3
/* destructive init */
#define PDC_IODC_MEMERR 4
/* check for memory errors */
#define PDC_IODC_INDEX_DATA 0
/* get first 16 bytes from mod IODC */
#define PDC_IODC_BUS_ERROR -4
/* bus error return value */
#define PDC_IODC_INVALID_INDEX -5
/* invalid index return value */
#define PDC_IODC_COUNT -6
/* count is too small */
#define PDC_TOD 9
/* time-of-day clock (TOD) */
#define PDC_TOD_READ 0
/* read TOD */
#define PDC_TOD_WRITE 1
/* write TOD */
#define PDC_STABLE 10
/* stable storage (sprockets) */
#define PDC_STABLE_READ 0
#define PDC_STABLE_WRITE 1
#define PDC_STABLE_RETURN_SIZE 2
#define PDC_STABLE_VERIFY_CONTENTS 3
#define PDC_STABLE_INITIALIZE 4
#define PDC_NVOLATILE 11
/* often not implemented */
#define PDC_ADD_VALID 12
/* Memory validation PDC call */
#define PDC_ADD_VALID_VERIFY 0
/* Make PDC_ADD_VALID verify region */
#define PDC_INSTR 15
/* get instr to invoke PDCE_CHECK() */
#define PDC_PROC 16
/* (sprockets) */
#define PDC_CONFIG 16
/* (sprockets) */
#define PDC_CONFIG_DECONFIG 0
#define PDC_CONFIG_DRECONFIG 1
#define PDC_CONFIG_DRETURN_CONFIG 2
#define PDC_BLOCK_TLB 18
/* manage hardware block-TLB */
#define PDC_BTLB_INFO 0
/* returns parameter */
#define PDC_BTLB_INSERT 1
/* insert BTLB entry */
#define PDC_BTLB_PURGE 2
/* purge BTLB entries */
#define PDC_BTLB_PURGE_ALL 3
/* purge all BTLB entries */
#define PDC_TLB 19
/* manage hardware TLB miss handling */
#define PDC_TLB_INFO 0
/* returns parameter */
#define PDC_TLB_SETUP 1
/* set up miss handling */
#define PDC_MEM 20
/* Manage memory */
#define PDC_MEM_MEMINFO 0
#define PDC_MEM_ADD_PAGE 1
#define PDC_MEM_CLEAR_PDT 2
#define PDC_MEM_READ_PDT 3
#define PDC_MEM_RESET_CLEAR 4
#define PDC_MEM_GOODMEM 5
#define PDC_MEM_TABLE 128
/* Non contig mem map (sprockets) */
#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE
#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131
#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132
#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
#define PDC_MEM_RET_SBE_REPLACED 5
/* PDC_MEM return values */
#define PDC_MEM_RET_DUPLICATE_ENTRY 4
#define PDC_MEM_RET_BUF_SIZE_SMALL 1
#define PDC_MEM_RET_PDT_FULL -11
#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
#define PDC_PSW 21
/* Get/Set default System Mask */
#define PDC_PSW_MASK 0
/* Return mask */
#define PDC_PSW_GET_DEFAULTS 1
/* Return defaults */
#define PDC_PSW_SET_DEFAULTS 2
/* Set default */
#define PDC_PSW_ENDIAN_BIT 1
/* set for big endian */
#define PDC_PSW_WIDE_BIT 2
/* set for wide mode */
#define PDC_SYSTEM_MAP 22
/* find system modules */
#define PDC_FIND_MODULE 0
#define PDC_FIND_ADDRESS 1
#define PDC_TRANSLATE_PATH 2
#define PDC_SOFT_POWER 23
/* soft power switch */
#define PDC_SOFT_POWER_INFO 0
/* return info about the soft power switch */
#define PDC_SOFT_POWER_ENABLE 1
/* enable/disable soft power switch */
/* HVERSION dependent */
/* The PDC_MEM_MAP calls */
#define PDC_MEM_MAP 128
/* on s700: return page info */
#define PDC_MEM_MAP_HPA 0
/* returns hpa of a module */
#define PDC_EEPROM 129
/* EEPROM access */
#define PDC_EEPROM_READ_WORD 0
#define PDC_EEPROM_WRITE_WORD 1
#define PDC_EEPROM_READ_BYTE 2
#define PDC_EEPROM_WRITE_BYTE 3
#define PDC_EEPROM_EEPROM_PASSWORD -1000
#define PDC_NVM 130
/* NVM (non-volatile memory) access */
#define PDC_NVM_READ_WORD 0
#define PDC_NVM_WRITE_WORD 1
#define PDC_NVM_READ_BYTE 2
#define PDC_NVM_WRITE_BYTE 3
#define PDC_SEED_ERROR 132
/* (sprockets) */
#define PDC_IO 135
/* log error info, reset IO system */
#define PDC_IO_READ_AND_CLEAR_ERRORS 0
#define PDC_IO_RESET 1
#define PDC_IO_RESET_DEVICES 2
/* sets bits 6&7 (little endian) of the HcControl Register */
#define PDC_IO_USB_SUSPEND 0xC000000000000000
#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5
/* return value */
#define PDC_IO_NO_SUSPEND -6
/* return value */
#define PDC_BROADCAST_RESET 136
/* reset all processors */
#define PDC_DO_RESET 0
/* option: perform a broadcast reset */
#define PDC_DO_FIRM_TEST_RESET 1
/* Do broadcast reset with bitmap */
#define PDC_BR_RECONFIGURATION 2
/* reset w/reconfiguration */
#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL
/* for this reboot only */
#define PDC_LAN_STATION_ID 138
/* Hversion dependent mechanism for */
#define PDC_LAN_STATION_ID_READ 0
/* getting the lan station address */
#define PDC_LAN_STATION_ID_SIZE 6
#define PDC_CHECK_RANGES 139
/* (sprockets) */
#define PDC_NV_SECTIONS 141
/* (sprockets) */
#define PDC_PERFORMANCE 142
/* performance monitoring */
#define PDC_SYSTEM_INFO 143
/* system information */
#define PDC_SYSINFO_RETURN_INFO_SIZE 0
#define PDC_SYSINFO_RRETURN_SYS_INFO 1
#define PDC_SYSINFO_RRETURN_ERRORS 2
#define PDC_SYSINFO_RRETURN_WARNINGS 3
#define PDC_SYSINFO_RETURN_REVISIONS 4
#define PDC_SYSINFO_RRETURN_DIAGNOSE 5
#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005
#define PDC_RDR 144
/* (sprockets) */
#define PDC_RDR_READ_BUFFER 0
#define PDC_RDR_READ_SINGLE 1
#define PDC_RDR_WRITE_SINGLE 2
#define PDC_INTRIGUE 145
/* (sprockets) */
#define PDC_INTRIGUE_WRITE_BUFFER 0
#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
#define PDC_INTRIGUE_START_CPU_COUNTERS 2
#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3
#define PDC_STI 146
/* STI access */
/* same as PDC_PCI_XXX values (see below) */
/* Legacy PDC definitions for same stuff */
#define PDC_PCI_INDEX 147
#define PDC_PCI_INTERFACE_INFO 0
#define PDC_PCI_SLOT_INFO 1
#define PDC_PCI_INFLIGHT_BYTES 2
#define PDC_PCI_READ_CONFIG 3
#define PDC_PCI_WRITE_CONFIG 4
#define PDC_PCI_READ_PCI_IO 5
#define PDC_PCI_WRITE_PCI_IO 6
#define PDC_PCI_READ_CONFIG_DELAY 7
#define PDC_PCI_UPDATE_CONFIG_DELAY 8
#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9
#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10
#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11
#define PDC_PCI_PCI_RESERVED 12
#define PDC_PCI_PCI_INT_ROUTE_SIZE 13
#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE
#define PDC_PCI_PCI_INT_ROUTE 14
#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE
#define PDC_PCI_READ_MON_TYPE 15
#define PDC_PCI_WRITE_MON_TYPE 16
/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */
#define PDC_INITIATOR 163
#define PDC_GET_INITIATOR 0
#define PDC_SET_INITIATOR 1
#define PDC_DELETE_INITIATOR 2
#define PDC_RETURN_TABLE_SIZE 3
#define PDC_RETURN_TABLE 4
#define PDC_LINK 165
/* (sprockets) */
#define PDC_LINK_PCI_ENTRY_POINTS 0
/* list (Arg1) = 0 */
#define PDC_LINK_USB_ENTRY_POINTS 1
/* list (Arg1) = 1 */
/* cl_class
* page 3-33 of IO-Firmware ARS
* IODC ENTRY_INIT(Search first) RET[1]
*/
#define CL_NULL 0
/* invalid */
#define CL_RANDOM 1
/* random access (as disk) */
#define CL_SEQU 2
/* sequential access (as tape) */
#define CL_DUPLEX 7
/* full-duplex point-to-point (RS-232, Net) */
#define CL_KEYBD 8
/* half-duplex console (HIL Keyboard) */
#define CL_DISPL 9
/* half-duplex console (display) */
#define CL_FC 10
/* FiberChannel access media */
/* IODC ENTRY_INIT() */
#define ENTRY_INIT_SRCH_FRST 2
#define ENTRY_INIT_SRCH_NEXT 3
#define ENTRY_INIT_MOD_DEV 4
#define ENTRY_INIT_DEV 5
#define ENTRY_INIT_MOD 6
#define ENTRY_INIT_MSG 9
/* IODC ENTRY_IO() */
#define ENTRY_IO_BOOTIN 0
#define ENTRY_IO_BOOTOUT 1
#define ENTRY_IO_CIN 2
#define ENTRY_IO_COUT 3
#define ENTRY_IO_CLOSE 4
#define ENTRY_IO_GETMSG 9
#define ENTRY_IO_BBLOCK_IN 16
#define ENTRY_IO_BBLOCK_OUT 17
/* IODC ENTRY_SPA() */
/* IODC ENTRY_CONFIG() */
/* IODC ENTRY_TEST() */
/* IODC ENTRY_TLB() */
/* constants for OS (NVM...) */
#define OS_ID_NONE 0
/* Undefined OS ID */
#define OS_ID_HPUX 1
/* HP-UX OS */
#define OS_ID_MPEXL 2
/* MPE XL OS */
#define OS_ID_OSF 3
/* OSF OS */
#define OS_ID_HPRT 4
/* HP-RT OS */
#define OS_ID_NOVEL 5
/* NOVELL OS */
#define OS_ID_LINUX 6
/* Linux */
/* constants for PDC_CHASSIS */
#define OSTAT_OFF 0
#define OSTAT_FLT 1
#define OSTAT_TEST 2
#define OSTAT_INIT 3
#define OSTAT_SHUT 4
#define OSTAT_WARN 5
#define OSTAT_RUN 6
#define OSTAT_ON 7
/* Page Zero constant offsets used by the HPMC handler */
#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
/* size of the pdc_result buffer for firmware.c */
#define NUM_PDC_RESULT 32
#if !defined(__ASSEMBLY__)
#include <linux/types.h>
/* flags of the device_path */
#define PF_AUTOBOOT 0x80
#define PF_AUTOSEARCH 0x40
#define PF_TIMER 0x0F
struct device_path { /* page 1-69 */
unsigned char flags; /* flags see above! */
unsigned char bc[6]; /* bus converter routing info */
unsigned char mod;
unsigned int layers[6];/* device-specific layer-info */
} __attribute__((aligned(8))) ;
struct pz_device {
struct device_path dp; /* see above */
/* struct iomod *hpa; */
unsigned int hpa; /* HPA base address */
/* char *spa; */
unsigned int spa; /* SPA base address */
/* int (*iodc_io)(struct iomod*, ...); */
unsigned int iodc_io; /* device entry point */
short pad; /* reserved */
unsigned short cl_class;/* see below */
} __attribute__((aligned(8))) ;
struct zeropage {
/* [0x000] initialize vectors (VEC) */
unsigned int vec_special; /* must be zero */
/* int (*vec_pow_fail)(void);*/
unsigned int vec_pow_fail; /* power failure handler */
/* int (*vec_toc)(void); */
unsigned int vec_toc;
unsigned int vec_toclen;
/* int (*vec_rendz)(void); */
unsigned int vec_rendz;
int vec_pow_fail_flen;
int vec_pad[10];
/* [0x040] reserved processor dependent */
int pad0[112];
/* [0x200] reserved */
int pad1[84];
/* [0x350] memory configuration (MC) */
int memc_cont; /* contiguous mem size (bytes) */
int memc_phsize; /* physical memory size */
int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */
unsigned int mem_pdc_hi; /* used for 64-bit */
/* [0x360] various parameters for the boot-CPU */
/* unsigned int *mem_booterr[8]; */
unsigned int mem_booterr[8]; /* ptr to boot errors */
unsigned int mem_free; /* first location, where OS can be loaded */
/* struct iomod *mem_hpa; */
unsigned int mem_hpa; /* HPA of the boot-CPU */
/* int (*mem_pdc)(int, ...); */
unsigned int mem_pdc; /* PDC entry point */
unsigned int mem_10msec; /* number of clock ticks in 10msec */
/* [0x390] initial memory module (IMM) */
/* struct iomod *imm_hpa; */
unsigned int imm_hpa; /* HPA of the IMM */
int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */
unsigned int imm_spa_size; /* SPA size of the IMM in bytes */
unsigned int imm_max_mem; /* bytes of mem in IMM */
/* [0x3A0] boot console, display device and keyboard */
struct pz_device mem_cons; /* description of console device */
struct pz_device mem_boot; /* description of boot device */
struct pz_device mem_kbd; /* description of keyboard device */
/* [0x430] reserved */
int pad430[116];
/* [0x600] processor dependent */
__u32 pad600[1];
__u32 proc_sti; /* pointer to STI ROM */
__u32 pad608[126];
};
#endif /* !defined(__ASSEMBLY__) */
#endif /* _UAPI_PARISC_PDC_H */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| David Howells | 1418 | 99.93% | 1 | 50.00% |
| Andrea Gelmini | 1 | 0.07% | 1 | 50.00% |
| Total | 1419 | 100.00% | 2 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.