cregit-Linux how code gets into the kernel

Release 4.11 drivers/ata/pata_isapnp.c

Directory: drivers/ata
/*
 *   pata-isapnp.c - ISA PnP PATA controller driver.
 *   Copyright 2005/2006 Red Hat Inc, all rights reserved.
 *
 *   Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru>
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/isapnp.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/libata.h>


#define DRV_NAME "pata_isapnp"

#define DRV_VERSION "0.2.5"


static struct scsi_host_template isapnp_sht = {
	ATA_PIO_SHT(DRV_NAME),
};


static struct ata_port_operations isapnp_port_ops = {
	.inherits	= &ata_sff_port_ops,
	.cable_detect	= ata_cable_40wire,
};


static struct ata_port_operations isapnp_noalt_port_ops = {
	.inherits	= &ata_sff_port_ops,
	.cable_detect	= ata_cable_40wire,
	/* No altstatus so we don't want to use the lost interrupt poll */
	.lost_interrupt = ATA_OP_NULL,
};

/**
 *      isapnp_init_one         -       attach an isapnp interface
 *      @idev: PnP device
 *      @dev_id: matching detect line
 *
 *      Register an ISA bus IDE interface. Such interfaces are PIO 0 and
 *      non shared IRQ.
 */


static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev_id) { struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; int irq = 0; irq_handler_t handler = NULL; if (pnp_port_valid(idev, 0) == 0) return -ENODEV; if (pnp_irq_valid(idev, 0)) { irq = pnp_irq(idev, 0); handler = ata_sff_interrupt; } /* allocate host */ host = ata_host_alloc(&idev->dev, 1); if (!host) return -ENOMEM; /* acquire resources and fill host */ cmd_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 0), 8); if (!cmd_addr) return -ENOMEM; ap = host->ports[0]; ap->ops = &isapnp_noalt_port_ops; ap->pio_mask = ATA_PIO0; ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = cmd_addr; if (pnp_port_valid(idev, 1)) { ctl_addr = devm_ioport_map(&idev->dev, pnp_port_start(idev, 1), 1); ap->ioaddr.altstatus_addr = ctl_addr; ap->ioaddr.ctl_addr = ctl_addr; ap->ops = &isapnp_port_ops; } ata_sff_std_ports(&ap->ioaddr); ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", (unsigned long long)pnp_port_start(idev, 0), (unsigned long long)pnp_port_start(idev, 1)); /* activate */ return ata_host_activate(host, irq, handler, 0, &isapnp_sht); }

Contributors

PersonTokensPropCommitsCommitProp
Tejun Heo16057.35%450.00%
Jeff Garzik8430.11%112.50%
Alan Cox3412.19%225.00%
Erik Inge Bolsö10.36%112.50%
Total279100.00%8100.00%

/** * isapnp_remove_one - unplug an isapnp interface * @idev: PnP device * * Remove a previously configured PnP ATA port. Called only on module * unload events as the core does not currently deal with ISAPnP docking. */
static void isapnp_remove_one(struct pnp_dev *idev) { struct device *dev = &idev->dev; struct ata_host *host = dev_get_drvdata(dev); ata_host_detach(host); }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik3597.22%150.00%
Tejun Heo12.78%150.00%
Total36100.00%2100.00%

static struct pnp_device_id isapnp_devices[] = { /* Generic ESDI/IDE/ATA compatible hard disk controller */ {.id = "PNP0600", .driver_data = 0}, {.id = ""} }; MODULE_DEVICE_TABLE(pnp, isapnp_devices); static struct pnp_driver isapnp_driver = { .name = DRV_NAME, .id_table = isapnp_devices, .probe = isapnp_init_one, .remove = isapnp_remove_one, }; module_pnp_driver(isapnp_driver); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for ISA PnP ATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION);

Overall Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik26453.44%320.00%
Tejun Heo16834.01%746.67%
Alan Cox6012.15%320.00%
Erik Inge Bolsö10.20%16.67%
Peter Hüwe10.20%16.67%
Total494100.00%15100.00%
Directory: drivers/ata
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.