cregit-Linux how code gets into the kernel

Release 4.11 drivers/ata/pata_pcmcia.c

Directory: drivers/ata
/*
 *   pata_pcmcia.c - PCMCIA PATA controller driver.
 *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
 *   PCMCIA ident update Copyright 2006 Marcin Juszkiewicz
 *                                              <openembedded@hrw.one.pl>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2, or (at your option)
 *  any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; see the file COPYING.  If not, write to
 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *   Heavily based upon ide-cs.c
 *   The initial developer of the original code is David A. Hinds
 *   <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
 *   are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
#include <linux/libata.h>

#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>



#define DRV_NAME "pata_pcmcia"

#define DRV_VERSION "0.3.5"

/**
 *      pcmcia_set_mode -       PCMCIA specific mode setup
 *      @link: link
 *      @r_failed_dev: Return pointer for failed device
 *
 *      Perform the tuning and setup of the devices and timings, which
 *      for PCMCIA is the same as any other controller. We wrap it however
 *      as we need to spot hardware with incorrect or missing master/slave
 *      decode, which alas is embarrassingly common in the PC world
 */


static int pcmcia_set_mode(struct ata_link *link, struct ata_device **r_failed_dev) { struct ata_device *master = &link->device[0]; struct ata_device *slave = &link->device[1]; if (!ata_dev_enabled(master) || !ata_dev_enabled(slave)) return ata_do_set_mode(link, r_failed_dev); if (memcmp(master->id + ATA_ID_FW_REV, slave->id + ATA_ID_FW_REV, ATA_ID_FW_REV_LEN + ATA_ID_PROD_LEN) == 0) { /* Suspicious match, but could be two cards from the same vendor - check serial */ if (memcmp(master->id + ATA_ID_SERNO, slave->id + ATA_ID_SERNO, ATA_ID_SERNO_LEN) == 0 && master->id[ATA_ID_SERNO] >> 8) { ata_dev_warn(slave, "is a ghost device, ignoring\n"); ata_dev_disable(slave); } } return ata_do_set_mode(link, r_failed_dev); }

Contributors

PersonTokensPropCommitsCommitProp
Alan Cox13393.01%125.00%
Tejun Heo85.59%250.00%
Joe Perches21.40%125.00%
Total143100.00%4100.00%

/** * pcmcia_set_mode_8bit - PCMCIA specific mode setup * @link: link * @r_failed_dev: Return pointer for failed device * * For the simple emulated 8bit stuff the less we do the better. */
static int pcmcia_set_mode_8bit(struct ata_link *link, struct ata_device **r_failed_dev) { return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Alan Cox20100.00%1100.00%
Total20100.00%1100.00%

/** * ata_data_xfer_8bit - Transfer data by 8bit PIO * @qc: queued command * @buf: data buffer * @buflen: buffer length * @rw: read/write * * Transfer data from/to the device data register by 8 bit PIO. * * LOCKING: * Inherited from caller. */
static unsigned int ata_data_xfer_8bit(struct ata_queued_cmd *qc, unsigned char *buf, unsigned int buflen, int rw) { struct ata_port *ap = qc->dev->link->ap; if (rw == READ) ioread8_rep(ap->ioaddr.data_addr, buf, buflen); else iowrite8_rep(ap->ioaddr.data_addr, buf, buflen); return buflen; }

Contributors

PersonTokensPropCommitsCommitProp
Alan Cox5778.08%133.33%
Tejun Heo1216.44%133.33%
Bartlomiej Zolnierkiewicz45.48%133.33%
Total73100.00%3100.00%

/** * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers * @qc: command * * Drain the FIFO and device of any stuck data following a command * failing to complete. In some cases this is necessary before a * reset will recover the device. * */
static void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) { int count; struct ata_port *ap; /* We only need to flush incoming data when a command was running */ if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE) return; ap = qc->ap; /* Drain up to 64K of data before we give up this recovery method */ for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ) && count++ < 65536;) ioread8(ap->ioaddr.data_addr); if (count) ata_port_warn(ap, "drained %d bytes to clear DRQ\n", count); }

Contributors

PersonTokensPropCommitsCommitProp
Alan Cox8496.55%133.33%
Joe Perches22.30%133.33%
Robert Hancock11.15%133.33%
Total87100.00%3100.00%

static struct scsi_host_template pcmcia_sht = { ATA_PIO_SHT(DRV_NAME), }; static struct ata_port_operations pcmcia_port_ops = { .inherits = &ata_sff_port_ops, .sff_data_xfer = ata_sff_data_xfer_noirq, .cable_detect = ata_cable_40wire, .set_mode = pcmcia_set_mode, }; static struct ata_port_operations pcmcia_8bit_port_ops = { .inherits = &ata_sff_port_ops, .sff_data_xfer = ata_data_xfer_8bit, .cable_detect = ata_cable_40wire, .set_mode = pcmcia_set_mode_8bit, .sff_drain_fifo = pcmcia_8bit_drain_fifo, };
static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { int *is_kme = priv_data; if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH) != IO_DATA_PATH_WIDTH_8) { pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; } pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (pdev->resource[1]->end) { pdev->resource[0]->end = 8; pdev->resource[1]->end = (*is_kme) ? 2 : 1; } else { if (pdev->resource[0]->end < 16) return -ENODEV; } return pcmcia_request_io(pdev); }

Contributors

PersonTokensPropCommitsCommitProp
Dominik Brodowski11071.43%562.50%
Jeff Garzik3925.32%112.50%
Julia Lawall31.95%112.50%
Alan Cox21.30%112.50%
Total154100.00%8100.00%

/** * pcmcia_init_one - attach a PCMCIA interface * @pdev: pcmcia device * * Register a PCMCIA IDE interface. Such interfaces are PIO 0 and * shared IRQ. */
static int pcmcia_init_one(struct pcmcia_device *pdev) { struct ata_host *host; struct ata_port *ap; int is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; int n_ports = 1; struct ata_port_operations *ops = &pcmcia_port_ops; /* Set up attributes in order to probe card and get resources */ pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ is_kme = ((pdev->manf_id == MANFID_KME) && ((pdev->card_id == PRODID_KME_KXLC005_A) || (pdev->card_id == PRODID_KME_KXLC005_B))); if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) { pdev->config_flags &= ~CONF_AUTO_CHECK_VCC; if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) goto failed; /* No suitable config found */ } io_base = pdev->resource[0]->start; if (pdev->resource[1]->end) ctl_base = pdev->resource[1]->start; else ctl_base = pdev->resource[0]->start + 0x0e; if (!pdev->irq) goto failed; ret = pcmcia_enable_device(pdev); if (ret) goto failed; /* iomap */ ret = -ENOMEM; io_addr = devm_ioport_map(&pdev->dev, io_base, 8); ctl_addr = devm_ioport_map(&pdev->dev, ctl_base, 1); if (!io_addr || !ctl_addr) goto failed; /* Success. Disable the IRQ nIEN line, do quirks */ iowrite8(0x02, ctl_addr); if (is_kme) iowrite8(0x81, ctl_addr + 0x01); /* FIXME: Could be more ports at base + 0x10 but we only deal with one right now */ if (resource_size(pdev->resource[0]) >= 0x20) n_ports = 2; if (pdev->manf_id == 0x0097 && pdev->card_id == 0x1620) ops = &pcmcia_8bit_port_ops; /* * Having done the PCMCIA plumbing the ATA side is relatively * sane. */ ret = -ENOMEM; host = ata_host_alloc(&pdev->dev, n_ports); if (!host) goto failed; for (p = 0; p < n_ports; p++) { ap = host->ports[p]; ap->ops = ops; ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */ ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ioaddr.cmd_addr = io_addr + 0x10 * p; ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p; ap->ioaddr.ctl_addr = ctl_addr + 0x10 * p; ata_sff_std_ports(&ap->ioaddr); ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); } /* activate */ ret = ata_host_activate(host, pdev->irq, ata_sff_interrupt, IRQF_SHARED, &pcmcia_sht); if (ret) goto failed; pdev->priv = host; return 0; failed: pcmcia_disable_device(pdev); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Dominik Brodowski17736.49%847.06%
Jeff Garzik12826.39%211.76%
Tejun Heo12625.98%423.53%
Alan Cox5310.93%211.76%
Erik Inge Bolsö10.21%15.88%
Total485100.00%17100.00%

/** * pcmcia_remove_one - unplug an pcmcia interface * @pdev: pcmcia device * * A PCMCIA ATA device has been unplugged. Perform the needed * cleanup. Also called on module unload for any active devices. */
static void pcmcia_remove_one(struct pcmcia_device *pdev) { struct ata_host *host = pdev->priv; if (host) ata_host_detach(host); pcmcia_disable_device(pdev); }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik3088.24%133.33%
Dominik Brodowski38.82%133.33%
Tejun Heo12.94%133.33%
Total34100.00%3100.00%

static const struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_FUNC_ID(4), PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */ PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */ PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */ PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001), PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */ PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */ PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0), PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74), PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9), PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591), PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728), PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591), PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591), PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4), PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde), PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf), PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591), PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728), PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728), PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1), PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883), PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d), PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47), PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852), PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918), PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209), PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e), PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6), PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices); static struct pcmcia_driver pcmcia_driver = { .owner = THIS_MODULE, .name = DRV_NAME, .id_table = pcmcia_devices, .probe = pcmcia_init_one, .remove = pcmcia_remove_one, }; module_pcmcia_driver(pcmcia_driver); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for PCMCIA ATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION);

Overall Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik77041.62%23.70%
Alan Cox40221.73%611.11%
Dominik Brodowski30916.70%1120.37%
Tejun Heo1739.35%1324.07%
Kristoffer Ericson703.78%47.41%
Magnus Damm261.41%11.85%
Marcin Juszkiewicz221.19%23.70%
Matt Reimer221.19%23.70%
Fabrice Aeschbacher110.59%11.85%
Wolfram Sang110.59%11.85%
Marc Pignat70.38%11.85%
Richard Kennedy70.38%11.85%
Bartlomiej Zolnierkiewicz50.27%11.85%
Joe Perches50.27%23.70%
Julia Lawall30.16%11.85%
Akira Iguchi30.16%11.85%
H Hartley Sweeten10.05%11.85%
Daniel Mack10.05%11.85%
Erik Inge Bolsö10.05%11.85%
Robert Hancock10.05%11.85%
Total1850100.00%54100.00%
Directory: drivers/ata
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.