cregit-Linux how code gets into the kernel

Release 4.11 drivers/ata/sata_svw.c

Directory: drivers/ata
/*
 *  sata_svw.c - ServerWorks / Apple K2 SATA
 *
 *  Maintained by: Benjamin Herrenschmidt <benh@kernel.crashing.org> and
 *                 Jeff Garzik <jgarzik@pobox.com>
 *                  Please ALWAYS copy linux-ide@vger.kernel.org
 *                  on emails.
 *
 *  Copyright 2003 Benjamin Herrenschmidt <benh@kernel.crashing.org>
 *
 *  Bits from Jeff Garzik, Copyright RedHat, Inc.
 *
 *  This driver probably works with non-Apple versions of the
 *  Broadcom chipset...
 *
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2, or (at your option)
 *  any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; see the file COPYING.  If not, write to
 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *
 *  libata documentation is available via 'make {ps|pdf}docs',
 *  as Documentation/DocBook/libata.*
 *
 *  Hardware documentation available under NDA.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi.h>
#include <linux/libata.h>
#include <linux/of.h>


#define DRV_NAME	"sata_svw"

#define DRV_VERSION	"2.3"

enum {
	/* ap->flags bits */
	
K2_FLAG_SATA_8_PORTS		= (1 << 24),
	
K2_FLAG_NO_ATAPI_DMA		= (1 << 25),
	
K2_FLAG_BAR_POS_3			= (1 << 26),

	/* Taskfile registers offsets */
	
K2_SATA_TF_CMD_OFFSET		= 0x00,
	
K2_SATA_TF_DATA_OFFSET		= 0x00,
	
K2_SATA_TF_ERROR_OFFSET		= 0x04,
	
K2_SATA_TF_NSECT_OFFSET		= 0x08,
	
K2_SATA_TF_LBAL_OFFSET		= 0x0c,
	
K2_SATA_TF_LBAM_OFFSET		= 0x10,
	
K2_SATA_TF_LBAH_OFFSET		= 0x14,
	
K2_SATA_TF_DEVICE_OFFSET	= 0x18,
	
K2_SATA_TF_CMDSTAT_OFFSET      	= 0x1c,
	
K2_SATA_TF_CTL_OFFSET		= 0x20,

	/* DMA base */
	
K2_SATA_DMA_CMD_OFFSET		= 0x30,

	/* SCRs base */
	
K2_SATA_SCR_STATUS_OFFSET	= 0x40,
	
K2_SATA_SCR_ERROR_OFFSET	= 0x44,
	
K2_SATA_SCR_CONTROL_OFFSET	= 0x48,

	/* Others */
	
K2_SATA_SICR1_OFFSET		= 0x80,
	
K2_SATA_SICR2_OFFSET		= 0x84,
	
K2_SATA_SIM_OFFSET		= 0x88,

	/* Port stride */
	
K2_SATA_PORT_OFFSET		= 0x100,

	
chip_svw4			= 0,
	
chip_svw8			= 1,
	
chip_svw42			= 2,	/* bar 3 */
	
chip_svw43			= 3,	/* bar 5 */
};

static u8 k2_stat_check_status(struct ata_port *ap);



static int k2_sata_check_atapi_dma(struct ata_queued_cmd *qc) { u8 cmnd = qc->scsicmd->cmnd[0]; if (qc->ap->flags & K2_FLAG_NO_ATAPI_DMA) return -1; /* ATAPI DMA not supported */ else { switch (cmnd) { case READ_10: case READ_12: case READ_16: case WRITE_10: case WRITE_12: case WRITE_16: return 0; default: return -1; } } }

Contributors

PersonTokensPropCommitsCommitProp
Anantha Subramanyam4460.27%150.00%
Jeff Garzik2939.73%150.00%
Total73100.00%2100.00%


static int k2_sata_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) { if (sc_reg > SCR_CONTROL) return -EINVAL; *val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4)); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik3567.31%133.33%
Tejun Heo1732.69%266.67%
Total52100.00%3100.00%


static int k2_sata_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) { if (sc_reg > SCR_CONTROL) return -EINVAL; writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4)); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik3876.00%133.33%
Tejun Heo1224.00%266.67%
Total50100.00%3100.00%


static int k2_sata_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { u8 dmactl; void __iomem *mmio = link->ap->ioaddr.bmdma_addr; dmactl = readb(mmio + ATA_DMA_CMD); /* Clear the start bit */ if (dmactl & ATA_DMA_START) { dmactl &= ~ATA_DMA_START; writeb(dmactl, mmio + ATA_DMA_CMD); } return ata_sff_softreset(link, class, deadline); }

Contributors

PersonTokensPropCommitsCommitProp
David Milburn78100.00%1100.00%
Total78100.00%1100.00%


static int k2_sata_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { u8 dmactl; void __iomem *mmio = link->ap->ioaddr.bmdma_addr; dmactl = readb(mmio + ATA_DMA_CMD); /* Clear the start bit */ if (dmactl & ATA_DMA_START) { dmactl &= ~ATA_DMA_START; writeb(dmactl, mmio + ATA_DMA_CMD); } return sata_sff_hardreset(link, class, deadline); }

Contributors

PersonTokensPropCommitsCommitProp
David Milburn78100.00%1100.00%
Total78100.00%1100.00%


static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; if (tf->ctl != ap->last_ctl) { writeb(tf->ctl, ioaddr->ctl_addr); ap->last_ctl = tf->ctl; ata_wait_idle(ap); } if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { writew(tf->feature | (((u16)tf->hob_feature) << 8), ioaddr->feature_addr); writew(tf->nsect | (((u16)tf->hob_nsect) << 8), ioaddr->nsect_addr); writew(tf->lbal | (((u16)tf->hob_lbal) << 8), ioaddr->lbal_addr); writew(tf->lbam | (((u16)tf->hob_lbam) << 8), ioaddr->lbam_addr); writew(tf->lbah | (((u16)tf->hob_lbah) << 8), ioaddr->lbah_addr); } else if (is_addr) { writew(tf->feature, ioaddr->feature_addr); writew(tf->nsect, ioaddr->nsect_addr); writew(tf->lbal, ioaddr->lbal_addr); writew(tf->lbam, ioaddr->lbam_addr); writew(tf->lbah, ioaddr->lbah_addr); } if (tf->flags & ATA_TFLAG_DEVICE) writeb(tf->device, ioaddr->device_addr); ata_wait_idle(ap); }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik26690.78%250.00%
Benjamin Herrenschmidt258.53%125.00%
Jeremy Higdon20.68%125.00%
Total293100.00%4100.00%


static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) { struct ata_ioports *ioaddr = &ap->ioaddr; u16 nsect, lbal, lbam, lbah, feature; tf->command = k2_stat_check_status(ap); tf->device = readw(ioaddr->device_addr); feature = readw(ioaddr->error_addr); nsect = readw(ioaddr->nsect_addr); lbal = readw(ioaddr->lbal_addr); lbam = readw(ioaddr->lbam_addr); lbah = readw(ioaddr->lbah_addr); tf->feature = feature; tf->nsect = nsect; tf->lbal = lbal; tf->lbam = lbam; tf->lbah = lbah; if (tf->flags & ATA_TFLAG_LBA48) { tf->hob_feature = feature >> 8; tf->hob_nsect = nsect >> 8; tf->hob_lbal = lbal >> 8; tf->hob_lbam = lbam >> 8; tf->hob_lbah = lbah >> 8; } }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik182100.00%2100.00%
Total182100.00%2100.00%

/** * k2_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction (MMIO) * @qc: Info associated with this ATA transaction. * * LOCKING: * spin_lock_irqsave(host lock) */
static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); u8 dmactl; void __iomem *mmio = ap->ioaddr.bmdma_addr; /* load PRD table addr. */ mb(); /* make sure PRD table writes are visible to controller */ writel(ap->bmdma_prd_dma, mmio + ATA_DMA_TABLE_OFS); /* specify data direction, triple-check start bit is clear */ dmactl = readb(mmio + ATA_DMA_CMD); dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); if (!rw) dmactl |= ATA_DMA_WR; writeb(dmactl, mmio + ATA_DMA_CMD); /* issue r/w command if this is not a ATA DMA command*/ if (qc->tf.protocol != ATA_PROT_DMA) ap->ops->sff_exec_command(ap, &qc->tf); }

Contributors

PersonTokensPropCommitsCommitProp
Anantha Subramanyam12296.83%120.00%
Tejun Heo21.59%240.00%
Al Viro10.79%120.00%
Adrian Bunk10.79%120.00%
Total126100.00%5100.00%

/** * k2_bmdma_start_mmio - Start a PCI IDE BMDMA transaction (MMIO) * @qc: Info associated with this ATA transaction. * * LOCKING: * spin_lock_irqsave(host lock) */
static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; void __iomem *mmio = ap->ioaddr.bmdma_addr; u8 dmactl; /* start host DMA transaction */ dmactl = readb(mmio + ATA_DMA_CMD); writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); /* This works around possible data corruption. On certain SATA controllers that can be seen when the r/w command is given to the controller before the host DMA is started. On a Read command, the controller would initiate the command to the drive even before it sees the DMA start. When there are very fast drives connected to the controller, or when the data request hits in the drive cache, there is the possibility that the drive returns a part or all of the requested data to the controller before the DMA start is issued. In this case, the controller would become confused as to what to do with the data. In the worst case when all the data is returned back to the controller, the controller could hang. In other cases it could return partial data returning in data corruption. This problem has been seen in PPC systems and can also appear on an system with very fast disks, where the SATA controller is sitting behind a number of bridges, and hence there is significant latency between the r/w command and the start command. */ /* issue r/w command if the access is to ATA */ if (qc->tf.protocol == ATA_PROT_DMA) ap->ops->sff_exec_command(ap, &qc->tf); }

Contributors

PersonTokensPropCommitsCommitProp
Anantha Subramanyam7693.83%120.00%
Pavel Machek22.47%120.00%
Adrian Bunk11.23%120.00%
Tejun Heo11.23%120.00%
Al Viro11.23%120.00%
Total81100.00%5100.00%


static u8 k2_stat_check_status(struct ata_port *ap) { return readl(ap->ioaddr.status_addr); }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik2095.24%150.00%
Jeremy Higdon14.76%150.00%
Total21100.00%2100.00%


static int k2_sata_show_info(struct seq_file *m, struct Scsi_Host *shost) { struct ata_port *ap; struct device_node *np; int index; /* Find the ata_port */ ap = ata_shost_to_port(shost); if (ap == NULL) return 0; /* Find the OF node for the PCI device proper */ np = pci_device_to_OF_node(to_pci_dev(ap->host->dev)); if (np == NULL) return 0; /* Match it to a port node */ index = (ap == ap->host->ports[0]) ? 0 : 1; for (np = np->child; np != NULL; np = np->sibling) { const u32 *reg = of_get_property(np, "reg", NULL); if (!reg) continue; if (index == *reg) { seq_printf(m, "devspec: %s\n", np->full_name); break; } } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik13185.06%337.50%
Al Viro138.44%112.50%
Christoph Hellwig42.60%112.50%
Benjamin Herrenschmidt42.60%112.50%
Jeremy Kerr10.65%112.50%
Stephen Rothwell10.65%112.50%
Total154100.00%8100.00%

static struct scsi_host_template k2_sata_sht = { ATA_BMDMA_SHT(DRV_NAME), .show_info = k2_sata_show_info, }; static struct ata_port_operations k2_sata_ops = { .inherits = &ata_bmdma_port_ops, .softreset = k2_sata_softreset, .hardreset = k2_sata_hardreset, .sff_tf_load = k2_sata_tf_load, .sff_tf_read = k2_sata_tf_read, .sff_check_status = k2_stat_check_status, .check_atapi_dma = k2_sata_check_atapi_dma, .bmdma_setup = k2_bmdma_setup_mmio, .bmdma_start = k2_bmdma_start_mmio, .scr_read = k2_sata_scr_read, .scr_write = k2_sata_scr_write, }; static const struct ata_port_info k2_port_info[] = { /* chip_svw4 */ { .flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, /* chip_svw8 */ { .flags = ATA_FLAG_SATA | K2_FLAG_NO_ATAPI_DMA | K2_FLAG_SATA_8_PORTS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, /* chip_svw42 */ { .flags = ATA_FLAG_SATA | K2_FLAG_BAR_POS_3, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, /* chip_svw43 */ { .flags = ATA_FLAG_SATA, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, .port_ops = &k2_sata_ops, }, };
static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) { port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; port->data_addr = base + K2_SATA_TF_DATA_OFFSET; port->feature_addr = port->error_addr = base + K2_SATA_TF_ERROR_OFFSET; port->nsect_addr = base + K2_SATA_TF_NSECT_OFFSET; port->lbal_addr = base + K2_SATA_TF_LBAL_OFFSET; port->lbam_addr = base + K2_SATA_TF_LBAM_OFFSET; port->lbah_addr = base + K2_SATA_TF_LBAH_OFFSET; port->device_addr = base + K2_SATA_TF_DEVICE_OFFSET; port->command_addr = port->status_addr = base + K2_SATA_TF_CMDSTAT_OFFSET; port->altstatus_addr = port->ctl_addr = base + K2_SATA_TF_CTL_OFFSET; port->bmdma_addr = base + K2_SATA_DMA_CMD_OFFSET; port->scr_addr = base + K2_SATA_SCR_STATUS_OFFSET; }

Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik9475.81%125.00%
Benjamin Herrenschmidt1411.29%125.00%
Jeremy Higdon1310.48%125.00%
Tejun Heo32.42%125.00%
Total124100.00%4100.00%


static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { const struct ata_port_info *ppi[] = { &k2_port_info[ent->driver_data], NULL }; struct ata_host *host; void __iomem *mmio_base; int n_ports, i, rc, bar_pos; ata_print_version_once(&pdev->dev, DRV_VERSION); /* allocate host */ n_ports = 4; if (ppi[0]->flags & K2_FLAG_SATA_8_PORTS) n_ports = 8; host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); if (!host) return -ENOMEM; bar_pos = 5; if (ppi[0]->flags & K2_FLAG_BAR_POS_3) bar_pos = 3; /* * If this driver happens to only be useful on Apple's K2, then * we should check that here as it has a normal Serverworks ID */ rc = pcim_enable_device(pdev); if (rc) return rc; /* * Check if we have resources mapped at all (second function may * have been disabled by firmware) */ if (pci_resource_len(pdev, bar_pos) == 0) { /* In IDE mode we need to pin the device to ensure that pcim_release does not clear the busmaster bit in config space, clearing causes busmaster DMA to fail on ports 3 & 4 */ pcim_pin_device(pdev); return -ENODEV; } /* Request and iomap PCI regions */ rc = pcim_iomap_regions(pdev, 1 << bar_pos, DRV_NAME); if (rc == -EBUSY) pcim_pin_device(pdev); if (rc) return rc; host->iomap = pcim_iomap_table(pdev); mmio_base = host->iomap[bar_pos]; /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no * longer available. This should not be seen in any system. */ for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; unsigned int offset = i * K2_SATA_PORT_OFFSET; k2_sata_setup_port(&ap->ioaddr, mmio_base + offset); ata_port_pbar_desc(ap, 5, -1, "mmio"); ata_port_pbar_desc(ap, 5, offset, "port"); } rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK); if (rc) return rc; rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK); if (rc) return rc; /* Clear a magic bit in SCR1 according to Darwin, those help * some funky seagate drives (though so far, those were already * set by the firmware on the machines I had access to) */ writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000, mmio_base + K2_SATA_SICR1_OFFSET); /* Clear SATA error & interrupts we don't use */ writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); pci_set_master(pdev); return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &k2_sata_sht); }

Contributors

PersonTokensPropCommitsCommitProp
Tejun Heo23259.79%533.33%
Jeff Garzik7619.59%533.33%
Anantha Subramanyam328.25%16.67%
Benjamin Herrenschmidt225.67%16.67%
Narendra Sankar174.38%16.67%
Quentin Lambert82.06%16.67%
Joe Perches10.26%16.67%
Total388100.00%15100.00%

/* 0x240 is device ID for Apple K2 device * 0x241 is device ID for Serverworks Frodo4 * 0x242 is device ID for Serverworks Frodo8 * 0x24a is device ID for BCM5785 (aka HT1000) HT southbridge integrated SATA * controller * */ static const struct pci_device_id k2_sata_pci_tbl[] = { { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 }, { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, { PCI_VDEVICE(SERVERWORKS, 0x0411), chip_svw43 }, { } }; static struct pci_driver k2_sata_pci_driver = { .name = DRV_NAME, .id_table = k2_sata_pci_tbl, .probe = k2_sata_init_one, .remove = ata_pci_remove_one, }; module_pci_driver(k2_sata_pci_driver); MODULE_AUTHOR("Benjamin Herrenschmidt"); MODULE_DESCRIPTION("low-level driver for K2 SATA controller"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl); MODULE_VERSION(DRV_VERSION);

Overall Contributors

PersonTokensPropCommitsCommitProp
Jeff Garzik114451.03%2037.74%
Anantha Subramanyam39717.71%23.77%
Tejun Heo35515.83%1222.64%
David Milburn1667.40%11.89%
Benjamin Herrenschmidt883.93%23.77%
Narendra Sankar231.03%11.89%
Al Viro170.76%23.77%
Jeremy Higdon160.71%11.89%
Erik Inge Bolsö80.36%11.89%
Quentin Lambert80.36%11.89%
Oliver Weihe50.22%11.89%
Christoph Hellwig40.18%11.89%
Pavel Machek20.09%11.89%
Kevin Hao20.09%11.89%
Adrian Bunk20.09%11.89%
Stephen Rothwell10.04%11.89%
Axel Lin10.04%11.89%
Arjan van de Ven10.04%11.89%
Jeremy Kerr10.04%11.89%
Joe Perches10.04%11.89%
Total2242100.00%53100.00%
Directory: drivers/ata
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.