Release 4.11 drivers/atm/suni.h
/*
* drivers/atm/suni.h - S/UNI PHY driver
*/
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
#ifndef DRIVER_ATM_SUNI_H
#define DRIVER_ATM_SUNI_H
#include <linux/atmdev.h>
#include <linux/atmioc.h>
#include <linux/sonet.h>
/* SUNI registers */
#define SUNI_MRI 0x00
/* Master Reset and Identity / Load
Meter */
#define SUNI_MC 0x01
/* Master Configuration */
#define SUNI_MIS 0x02
/* Master Interrupt Status */
/* no 0x03 */
#define SUNI_MCM 0x04
/* Master Clock Monitor */
#define SUNI_MCT 0x05
/* Master Control */
#define SUNI_CSCS 0x06
/* Clock Synthesis Control and Status */
#define SUNI_CRCS 0x07
/* Clock Recovery Control and Status */
/* 0x08-0x0F reserved */
#define SUNI_RSOP_CIE 0x10
/* RSOP Control/Interrupt Enable */
#define SUNI_RSOP_SIS 0x11
/* RSOP Status/Interrupt Status */
#define SUNI_RSOP_SBL 0x12
/* RSOP Section BIP-8 LSB */
#define SUNI_RSOP_SBM 0x13
/* RSOP Section BIP-8 MSB */
#define SUNI_TSOP_CTRL 0x14
/* TSOP Control */
#define SUNI_TSOP_DIAG 0x15
/* TSOP Diagnostic */
/* 0x16-0x17 reserved */
#define SUNI_RLOP_CS 0x18
/* RLOP Control/Status */
#define SUNI_RLOP_IES 0x19
/* RLOP Interrupt Enable/Status */
#define SUNI_RLOP_LBL 0x1A
/* RLOP Line BIP-8/24 LSB */
#define SUNI_RLOP_LB 0x1B
/* RLOP Line BIP-8/24 */
#define SUNI_RLOP_LBM 0x1C
/* RLOP Line BIP-8/24 MSB */
#define SUNI_RLOP_LFL 0x1D
/* RLOP Line FEBE LSB */
#define SUNI_RLOP_LF 0x1E
/* RLOP Line FEBE */
#define SUNI_RLOP_LFM 0x1F
/* RLOP Line FEBE MSB */
#define SUNI_TLOP_CTRL 0x20
/* TLOP Control */
#define SUNI_TLOP_DIAG 0x21
/* TLOP Diagnostic */
/* 0x22-0x27 reserved */
#define SUNI_SSTB_CTRL 0x28
#define SUNI_RPOP_SC 0x30
/* RPOP Status/Control */
#define SUNI_RPOP_IS 0x31
/* RPOP Interrupt Status */
/* 0x32 reserved */
#define SUNI_RPOP_IE 0x33
/* RPOP Interrupt Enable */
/* 0x34-0x36 reserved */
#define SUNI_RPOP_PSL 0x37
/* RPOP Path Signal Label */
#define SUNI_RPOP_PBL 0x38
/* RPOP Path BIP-8 LSB */
#define SUNI_RPOP_PBM 0x39
/* RPOP Path BIP-8 MSB */
#define SUNI_RPOP_PFL 0x3A
/* RPOP Path FEBE LSB */
#define SUNI_RPOP_PFM 0x3B
/* RPOP Path FEBE MSB */
/* 0x3C reserved */
#define SUNI_RPOP_PBC 0x3D
/* RPOP Path BIP-8 Configuration */
#define SUNI_RPOP_RC 0x3D
/* RPOP Ring Control (PM5355) */
/* 0x3E-0x3F reserved */
#define SUNI_TPOP_CD 0x40
/* TPOP Control/Diagnostic */
#define SUNI_TPOP_PC 0x41
/* TPOP Pointer Control */
/* 0x42-0x44 reserved */
#define SUNI_TPOP_APL 0x45
/* TPOP Arbitrary Pointer LSB */
#define SUNI_TPOP_APM 0x46
/* TPOP Arbitrary Pointer MSB */
/* 0x47 reserved */
#define SUNI_TPOP_PSL 0x48
/* TPOP Path Signal Label */
#define SUNI_TPOP_PS 0x49
/* TPOP Path Status */
/* 0x4A-0x4F reserved */
#define SUNI_RACP_CS 0x50
/* RACP Control/Status */
#define SUNI_RACP_IES 0x51
/* RACP Interrupt Enable/Status */
#define SUNI_RACP_MHP 0x52
/* RACP Match Header Pattern */
#define SUNI_RACP_MHM 0x53
/* RACP Match Header Mask */
#define SUNI_RACP_CHEC 0x54
/* RACP Correctable HCS Error Count */
#define SUNI_RACP_UHEC 0x55
/* RACP Uncorrectable HCS Err Count */
#define SUNI_RACP_RCCL 0x56
/* RACP Receive Cell Counter LSB */
#define SUNI_RACP_RCC 0x57
/* RACP Receive Cell Counter */
#define SUNI_RACP_RCCM 0x58
/* RACP Receive Cell Counter MSB */
#define SUNI_RACP_CFG 0x59
/* RACP Configuration */
/* 0x5A-0x5F reserved */
#define SUNI_TACP_CS 0x60
/* TACP Control/Status */
#define SUNI_TACP_IUCHP 0x61
/* TACP Idle/Unassigned Cell Hdr Pat */
#define SUNI_TACP_IUCPOP 0x62
/* TACP Idle/Unassigned Cell Payload
Octet Pattern */
#define SUNI_TACP_FIFO 0x63
/* TACP FIFO Configuration */
#define SUNI_TACP_TCCL 0x64
/* TACP Transmit Cell Counter LSB */
#define SUNI_TACP_TCC 0x65
/* TACP Transmit Cell Counter */
#define SUNI_TACP_TCCM 0x66
/* TACP Transmit Cell Counter MSB */
#define SUNI_TACP_CFG 0x67
/* TACP Configuration */
#define SUNI_SPTB_CTRL 0x68
/* SPTB Control */
/* 0x69-0x7F reserved */
#define SUNI_MT 0x80
/* Master Test */
/* 0x81-0xFF reserved */
/* SUNI register values */
/* MRI is reg 0 */
#define SUNI_MRI_ID 0x0f
/* R, SUNI revision number */
#define SUNI_MRI_ID_SHIFT 0
#define SUNI_MRI_TYPE 0x70
/* R, SUNI type (lite is 011) */
#define SUNI_MRI_TYPE_SHIFT 4
#define SUNI_MRI_TYPE_PM5346 0x3
/* S/UNI 155 LITE */
#define SUNI_MRI_TYPE_PM5347 0x4
/* S/UNI 155 PLUS */
#define SUNI_MRI_TYPE_PM5350 0x7
/* S/UNI 155 ULTRA */
#define SUNI_MRI_TYPE_PM5355 0x1
/* S/UNI 622 */
#define SUNI_MRI_RESET 0x80
/* RW, reset & power down chip
0: normal operation
1: reset & low power */
/* MCM is reg 0x4 */
#define SUNI_MCM_LLE 0x20
/* line loopback (PM5355) */
#define SUNI_MCM_DLE 0x10
/* diagnostic loopback (PM5355) */
/* MCT is reg 5 */
#define SUNI_MCT_LOOPT 0x01
/* RW, timing source, 0: from
TRCLK+/- */
#define SUNI_MCT_DLE 0x02
/* RW, diagnostic loopback */
#define SUNI_MCT_LLE 0x04
/* RW, line loopback */
#define SUNI_MCT_FIXPTR 0x20
/* RW, disable transmit payload pointer
adjustments
0: payload ptr controlled by TPOP
ptr control reg
1: payload pointer fixed at 522 */
#define SUNI_MCT_LCDV 0x40
/* R, loss of cell delineation */
#define SUNI_MCT_LCDE 0x80
/* RW, loss of cell delineation
interrupt (1: on) */
/* RSOP_CIE is reg 0x10 */
#define SUNI_RSOP_CIE_OOFE 0x01
/* RW, enable interrupt on frame alarm
state change */
#define SUNI_RSOP_CIE_LOFE 0x02
/* RW, enable interrupt on loss of
frame state change */
#define SUNI_RSOP_CIE_LOSE 0x04
/* RW, enable interrupt on loss of
signal state change */
#define SUNI_RSOP_CIE_BIPEE 0x08
/* RW, enable interrupt on section
BIP-8 error (B1) */
#define SUNI_RSOP_CIE_FOOF 0x20
/* W, force RSOP out of frame at next
boundary */
#define SUNI_RSOP_CIE_DDS 0x40
/* RW, disable scrambling */
/* RSOP_SIS is reg 0x11 */
#define SUNI_RSOP_SIS_OOFV 0x01
/* R, out of frame */
#define SUNI_RSOP_SIS_LOFV 0x02
/* R, loss of frame */
#define SUNI_RSOP_SIS_LOSV 0x04
/* R, loss of signal */
#define SUNI_RSOP_SIS_OOFI 0x08
/* R, out of frame interrupt */
#define SUNI_RSOP_SIS_LOFI 0x10
/* R, loss of frame interrupt */
#define SUNI_RSOP_SIS_LOSI 0x20
/* R, loss of signal interrupt */
#define SUNI_RSOP_SIS_BIPEI 0x40
/* R, section BIP-8 interrupt */
/* TSOP_CTRL is reg 0x14 */
#define SUNI_TSOP_CTRL_LAIS 0x01
/* insert alarm indication signal */
#define SUNI_TSOP_CTRL_DS 0x40
/* disable scrambling */
/* TSOP_DIAG is reg 0x15 */
#define SUNI_TSOP_DIAG_DFP 0x01
/* insert single bit error cont. */
#define SUNI_TSOP_DIAG_DBIP8 0x02
/* insert section BIP err (cont) */
#define SUNI_TSOP_DIAG_DLOS 0x04
/* set line to zero (loss of signal) */
/* TLOP_DIAG is reg 0x21 */
#define SUNI_TLOP_DIAG_DBIP 0x01
/* insert line BIP err (continuously) */
/* SSTB_CTRL is reg 0x28 */
#define SUNI_SSTB_CTRL_LEN16 0x01
/* path trace message length bit */
/* RPOP_RC is reg 0x3D (PM5355) */
#define SUNI_RPOP_RC_ENSS 0x40
/* enable size bit */
/* TPOP_DIAG is reg 0x40 */
#define SUNI_TPOP_DIAG_PAIS 0x01
/* insert STS path alarm ind (cont) */
#define SUNI_TPOP_DIAG_DB3 0x02
/* insert path BIP err (continuously) */
/* TPOP_APM is reg 0x46 */
#define SUNI_TPOP_APM_APTR 0x03
/* RW, arbitrary pointer, upper 2
bits */
#define SUNI_TPOP_APM_APTR_SHIFT 0
#define SUNI_TPOP_APM_S 0x0c
/* RW, "unused" bits of payload
pointer */
#define SUNI_TPOP_APM_S_SHIFT 2
#define SUNI_TPOP_APM_NDF 0xf0
/* RW, NDF bits */
#define SUNI_TPOP_APM_NDF_SHIFT 4
#define SUNI_TPOP_S_SONET 0
/* set S bits to 00 */
#define SUNI_TPOP_S_SDH 2
/* set S bits to 10 */
/* RACP_IES is reg 0x51 */
#define SUNI_RACP_IES_FOVRI 0x02
/* R, FIFO overrun */
#define SUNI_RACP_IES_UHCSI 0x04
/* R, uncorrectable HCS error */
#define SUNI_RACP_IES_CHCSI 0x08
/* R, correctable HCS error */
#define SUNI_RACP_IES_OOCDI 0x10
/* R, change of cell delineation
state */
#define SUNI_RACP_IES_FIFOE 0x20
/* RW, enable FIFO overrun interrupt */
#define SUNI_RACP_IES_HCSE 0x40
/* RW, enable HCS error interrupt */
#define SUNI_RACP_IES_OOCDE 0x80
/* RW, enable cell delineation state
change interrupt */
/* TACP_CS is reg 0x60 */
#define SUNI_TACP_CS_FIFORST 0x01
/* RW, reset transmit FIFO (sticky) */
#define SUNI_TACP_CS_DSCR 0x02
/* RW, disable payload scrambling */
#define SUNI_TACP_CS_HCAADD 0x04
/* RW, add coset polynomial to HCS */
#define SUNI_TACP_CS_DHCS 0x10
/* RW, insert HCS errors */
#define SUNI_TACP_CS_FOVRI 0x20
/* R, FIFO overrun */
#define SUNI_TACP_CS_TSOCI 0x40
/* R, TSOC input high */
#define SUNI_TACP_CS_FIFOE 0x80
/* RW, enable FIFO overrun interrupt */
/* TACP_IUCHP is reg 0x61 */
#define SUNI_TACP_IUCHP_CLP 0x01
/* RW, 8th bit of 4th octet of i/u
pattern */
#define SUNI_TACP_IUCHP_PTI 0x0e
/* RW, 5th-7th bits of 4th octet of i/u
pattern */
#define SUNI_TACP_IUCHP_PTI_SHIFT 1
#define SUNI_TACP_IUCHP_GFC 0xf0
/* RW, 1st-4th bits of 1st octet of i/u
pattern */
#define SUNI_TACP_IUCHP_GFC_SHIFT 4
/* SPTB_CTRL is reg 0x68 */
#define SUNI_SPTB_CTRL_LEN16 0x01
/* path trace message length */
/* MT is reg 0x80 */
#define SUNI_MT_HIZIO 0x01
/* RW, all but data bus & MP interface
tri-state */
#define SUNI_MT_HIZDATA 0x02
/* W, also tri-state data bus */
#define SUNI_MT_IOTST 0x04
/* RW, enable test mode */
#define SUNI_MT_DBCTRL 0x08
/* W, control data bus by CSB pin */
#define SUNI_MT_PMCTST 0x10
/* W, PMC test mode */
#define SUNI_MT_DS27_53 0x80
/* RW, select between 8- or 16- bit */
#define SUNI_IDLE_PATTERN 0x6a
/* idle pattern */
#ifdef __KERNEL__
struct suni_priv {
struct k_sonet_stats sonet_stats; /* link diagnostics */
int loop_mode; /* loopback mode */
int type; /* phy type */
struct atm_dev *dev; /* device back-pointer */
struct suni_priv *next; /* next SUNI */
};
int suni_init(struct atm_dev *dev);
#endif
#endif
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Linus Torvalds (pre-git) | 659 | 86.37% | 2 | 40.00% |
| Chas Williams | 75 | 9.83% | 2 | 40.00% |
| Jorge Boncompte | 29 | 3.80% | 1 | 20.00% |
| Total | 763 | 100.00% | 5 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.