Release 4.11 drivers/clocksource/bcm_kona_timer.c

/*
 * Copyright (C) 2012 Broadcom Corporation
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation version 2.
 *
 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
 * kind, whether express or implied; without even the implied warranty
 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/clockchips.h>
#include <linux/types.h>
#include <linux/clk.h>

#include <linux/io.h>

#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>



#define KONA_GPTIMER_STCS_OFFSET			0x00000000

#define KONA_GPTIMER_STCLO_OFFSET			0x00000004

#define KONA_GPTIMER_STCHI_OFFSET			0x00000008

#define KONA_GPTIMER_STCM0_OFFSET			0x0000000C


#define KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT		0

#define KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT		4


struct kona_bcm_timers {
	
int tmr_irq;
	
void __iomem *tmr_regs;
};


static struct kona_bcm_timers timers;


static u32 arch_timer_rate;

/*
 * We use the peripheral timers for system tick, the cpu global timer for
 * profile tick
 */


static void kona_timer_disable_and_clear(void __iomem *base)
{
	uint32_t reg;

	/*
         * clear and disable interrupts
         * We are using compare/match register 0 for our system interrupts
         */
	reg = readl(base + KONA_GPTIMER_STCS_OFFSET);

	/* Clear compare (0) interrupt */
	reg |= 1 << KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT;
	/* disable compare */
	reg &= ~(1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);

	writel(reg, base + KONA_GPTIMER_STCS_OFFSET);

}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Christian Daudt
50
100.00%
1
100.00%
Total
50
100.00%
1
100.00%


static int

kona_timer_get_counter(void __iomem *timer_base, uint32_t *msw, uint32_t *lsw)
{
	int loop_limit = 3;

	/*
         * Read 64-bit free running counter
         * 1. Read hi-word
         * 2. Read low-word
         * 3. Read hi-word again
         * 4.1
         *      if new hi-word is not equal to previously read hi-word, then
         *      start from #1
         * 4.2
         *      if new hi-word is equal to previously read hi-word then stop.
         */

	do {
		*msw = readl(timer_base + KONA_GPTIMER_STCHI_OFFSET);
		*lsw = readl(timer_base + KONA_GPTIMER_STCLO_OFFSET);
		if (*msw == readl(timer_base + KONA_GPTIMER_STCHI_OFFSET))
			break;
	} while (--loop_limit);
	if (!loop_limit) {
		pr_err("bcm_kona_timer: getting counter failed.\n");
		pr_err(" Timer will be impacted\n");
		return -ETIMEDOUT;
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Christian Daudt
71
78.02%
1
33.33%
Arnd Bergmann
16
17.58%
1
33.33%
Olof Johansson
4
4.40%
1
33.33%
Total
91
100.00%
3
100.00%



static int kona_timer_set_next_event(unsigned long clc,
				  struct clock_event_device *unused)
{
	/*
         * timer (0) is disabled by the timer interrupt already
         * so, here we reload the next event value and re-enable
         * the timer.
         *
         * This way, we are potentially losing the time between
         * timer-interrupt->set_next_event. CPU local timers, when
         * they come in should get rid of skew.
         */

	uint32_t lsw, msw;
	uint32_t reg;
	int ret;

	ret = kona_timer_get_counter(timers.tmr_regs, &msw, &lsw);
	if (ret)
		return ret;

	/* Load the "next" event tick value */
	writel(lsw + clc, timers.tmr_regs + KONA_GPTIMER_STCM0_OFFSET);

	/* Enable compare */
	reg = readl(timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
	reg |= (1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
	writel(reg, timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Christian Daudt
85
87.63%
1
50.00%
Arnd Bergmann
12
12.37%
1
50.00%
Total
97
100.00%
2
100.00%



static int kona_timer_shutdown(struct clock_event_device *evt)
{
	kona_timer_disable_and_clear(timers.tmr_regs);
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Christian Daudt
15
71.43%
1
50.00%
Viresh Kumar
6
28.57%
1
50.00%
Total
21
100.00%
2
100.00%


static struct clock_event_device kona_clockevent_timer = {
	.name = "timer 1",
	.features = CLOCK_EVT_FEAT_ONESHOT,
	.set_next_event = kona_timer_set_next_event,
	.set_state_shutdown = kona_timer_shutdown,
	.tick_resume = kona_timer_shutdown,
};



static void __init kona_timer_clockevents_init(void)
{
	kona_clockevent_timer.cpumask = cpumask_of(0);
	clockevents_config_and_register(&kona_clockevent_timer,
		arch_timer_rate, 6, 0xffffffff);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Christian Daudt
30
100.00%
1
100.00%
Total
30
100.00%
1
100.00%



static irqreturn_t kona_timer_interrupt(int irq, void *dev_id)
{
	struct clock_event_device *evt = &kona_clockevent_timer;

	kona_timer_disable_and_clear(timers.tmr_regs);
	evt->event_handler(evt);
	return IRQ_HANDLED;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Christian Daudt
38
100.00%
1
100.00%
Total
38
100.00%
1
100.00%


static struct irqaction kona_timer_irq = {
	.name = "Kona Timer Tick",
	.flags = IRQF_TIMER,
	.handler = kona_timer_interrupt,
};



static int __init kona_timer_init(struct device_node *node)
{
	u32 freq;
	struct clk *external_clk;

	external_clk = of_clk_get_by_name(node, NULL);

	if (!IS_ERR(external_clk)) {
		arch_timer_rate = clk_get_rate(external_clk);
		clk_prepare_enable(external_clk);
	} else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
		arch_timer_rate = freq;
	} else {
		pr_err("Kona Timer v1 unable to determine clock-frequency");
		return -EINVAL;
	}

	/* Setup IRQ numbers */
	timers.tmr_irq = irq_of_parse_and_map(node, 0);

	/* Setup IO addresses */
	timers.tmr_regs = of_iomap(node, 0);

	kona_timer_disable_and_clear(timers.tmr_regs);

	kona_timer_clockevents_init();
	setup_irq(timers.tmr_irq, &kona_timer_irq);
	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Tim Kryger
94
66.67%
1
25.00%
Christian Daudt
32
22.70%
1
25.00%
Daniel Lezcano
8
5.67%
1
25.00%
Arnd Bergmann
7
4.96%
1
25.00%
Total
141
100.00%
4
100.00%

CLOCKSOURCE_OF_DECLARE(brcm_kona, "brcm,kona-timer", kona_timer_init);
/*
 * bcm,kona-timer is deprecated by brcm,kona-timer
 * being kept here for driver compatibility
 */
CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer", kona_timer_init);
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Christian Daudt
462
74.28%
2
20.00%
Tim Kryger
97
15.59%
2
20.00%
Arnd Bergmann
35
5.63%
2
20.00%
Viresh Kumar
14
2.25%
1
10.00%
Daniel Lezcano
10
1.61%
2
20.00%
Olof Johansson
4
0.64%
1
10.00%
Total
622
100.00%
10
100.00%
Directory: drivers/clocksource

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.