cregit-Linux how code gets into the kernel

Release 4.11 drivers/crypto/nx/nx-842.h

#ifndef __NX_842_H__

#define __NX_842_H__

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/crypto.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/ratelimit.h>

/* Restrictions on Data Descriptor List (DDL) and Entry (DDE) buffers
 *
 * From NX P8 workbook, sec 4.9.1 "842 details"
 *   Each DDE buffer is 128 byte aligned
 *   Each DDE buffer size is a multiple of 32 bytes (except the last)
 *   The last DDE buffer size is a multiple of 8 bytes
 */

#define DDE_BUFFER_ALIGN	(128)

#define DDE_BUFFER_SIZE_MULT	(32)

#define DDE_BUFFER_LAST_MULT	(8)

/* Arbitrary DDL length limit
 * Allows max buffer size of MAX-1 to MAX pages
 * (depending on alignment)
 */

#define DDL_LEN_MAX		(17)

/* CCW 842 CI/FC masks
 * NX P8 workbook, section 4.3.1, figure 4-6
 * "CI/FC Boundary by NX CT type"
 */

#define CCW_CI_842		(0x00003ff8)

#define CCW_FC_842		(0x00000007)

/* CCW Function Codes (FC) for 842
 * NX P8 workbook, section 4.9, table 4-28
 * "Function Code Definitions for 842 Memory Compression"
 */

#define CCW_FC_842_COMP_NOCRC	(0)

#define CCW_FC_842_COMP_CRC	(1)

#define CCW_FC_842_DECOMP_NOCRC	(2)

#define CCW_FC_842_DECOMP_CRC	(3)

#define CCW_FC_842_MOVE		(4)

/* CSB CC Error Types for 842
 * NX P8 workbook, section 4.10.3, table 4-30
 * "Reported Error Types Summary Table"
 */
/* These are all duplicates of existing codes defined in icswx.h. */

#define CSB_CC_TRANSLATION_DUP1	(80)

#define CSB_CC_TRANSLATION_DUP2	(82)

#define CSB_CC_TRANSLATION_DUP3	(84)

#define CSB_CC_TRANSLATION_DUP4	(86)

#define CSB_CC_TRANSLATION_DUP5	(92)

#define CSB_CC_TRANSLATION_DUP6	(94)

#define CSB_CC_PROTECTION_DUP1	(81)

#define CSB_CC_PROTECTION_DUP2	(83)

#define CSB_CC_PROTECTION_DUP3	(85)

#define CSB_CC_PROTECTION_DUP4	(87)

#define CSB_CC_PROTECTION_DUP5	(93)

#define CSB_CC_PROTECTION_DUP6	(95)

#define CSB_CC_RD_EXTERNAL_DUP1	(89)

#define CSB_CC_RD_EXTERNAL_DUP2	(90)

#define CSB_CC_RD_EXTERNAL_DUP3	(91)
/* These are specific to NX */
/* 842 codes */

#define CSB_CC_TPBC_GT_SPBC	(64) 
/* no error, but >1 comp ratio */

#define CSB_CC_CRC_MISMATCH	(65) 
/* decomp crc mismatch */

#define CSB_CC_TEMPL_INVALID	(66) 
/* decomp invalid template value */

#define CSB_CC_TEMPL_OVERFLOW	(67) 
/* decomp template shows data after end */
/* sym crypt codes */

#define CSB_CC_DECRYPT_OVERFLOW	(64)
/* asym crypt codes */

#define CSB_CC_MINV_OVERFLOW	(128)
/* These are reserved for hypervisor use */

#define CSB_CC_HYP_RESERVE_START	(240)

#define CSB_CC_HYP_RESERVE_END		(253)

#define CSB_CC_HYP_NO_HW		(254)

#define CSB_CC_HYP_HANG_ABORTED		(255)

/* CCB Completion Modes (CM) for 842
 * NX P8 workbook, section 4.3, figure 4-5
 * "CRB Details - Normal Cop_Req (CL=00, C=1)"
 */

#define CCB_CM_EXTRA_WRITE	(CCB_CM0_ALL_COMPLETIONS & CCB_CM12_STORE)

#define CCB_CM_INTERRUPT	(CCB_CM0_ALL_COMPLETIONS & CCB_CM12_INTERRUPT)


#define LEN_ON_SIZE(pa, size)	((size) - ((pa) & ((size) - 1)))

#define LEN_ON_PAGE(pa)		LEN_ON_SIZE(pa, PAGE_SIZE)


static inline unsigned long nx842_get_pa(void *addr) { if (!is_vmalloc_addr(addr)) return __pa(addr); return page_to_phys(vmalloc_to_page(addr)) + offset_in_page(addr); }

Contributors

PersonTokensPropCommitsCommitProp
Dan Streetman40100.00%1100.00%
Total40100.00%1100.00%

/* Get/Set bit fields */ #define MASK_LSH(m) (__builtin_ffsl(m) - 1) #define GET_FIELD(v, m) (((v) & (m)) >> MASK_LSH(m)) #define SET_FIELD(v, m, val) (((v) & ~(m)) | (((val) << MASK_LSH(m)) & (m))) /** * This provides the driver's constraints. Different nx842 implementations * may have varying requirements. The constraints are: * @alignment: All buffers should be aligned to this * @multiple: All buffer lengths should be a multiple of this * @minimum: Buffer lengths must not be less than this amount * @maximum: Buffer lengths must not be more than this amount * * The constraints apply to all buffers and lengths, both input and output, * for both compression and decompression, except for the minimum which * only applies to compression input and decompression output; the * compressed data can be less than the minimum constraint. It can be * assumed that compressed data will always adhere to the multiple * constraint. * * The driver may succeed even if these constraints are violated; * however the driver can return failure or suffer reduced performance * if any constraint is not met. */ struct nx842_constraints { int alignment; int multiple; int minimum; int maximum; }; struct nx842_driver { char *name; struct module *owner; size_t workmem_size; struct nx842_constraints *constraints; int (*compress)(const unsigned char *in, unsigned int in_len, unsigned char *out, unsigned int *out_len, void *wrkmem); int (*decompress)(const unsigned char *in, unsigned int in_len, unsigned char *out, unsigned int *out_len, void *wrkmem); }; struct nx842_crypto_header_group { __be16 padding; /* unused bytes at start of group */ __be32 compressed_length; /* compressed bytes in group */ __be32 uncompressed_length; /* bytes after decompression */ } __packed; struct nx842_crypto_header { __be16 magic; /* NX842_CRYPTO_MAGIC */ __be16 ignore; /* decompressed end bytes to ignore */ u8 groups; /* total groups in this header */ struct nx842_crypto_header_group group[]; } __packed; #define NX842_CRYPTO_GROUP_MAX (0x20) struct nx842_crypto_ctx { spinlock_t lock; u8 *wmem; u8 *sbounce, *dbounce; struct nx842_crypto_header header; struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX]; struct nx842_driver *driver; }; int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver); void nx842_crypto_exit(struct crypto_tfm *tfm); int nx842_crypto_compress(struct crypto_tfm *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen); int nx842_crypto_decompress(struct crypto_tfm *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen); #endif /* __NX_842_H__ */

Overall Contributors

PersonTokensPropCommitsCommitProp
Dan Streetman547100.00%9100.00%
Total547100.00%9100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.