Release 4.11 drivers/crypto/ux500/hash/hash_alg.h
/*
* Copyright (C) ST-Ericsson SA 2010
* Author: Shujuan Chen (shujuan.chen@stericsson.com)
* Author: Joakim Bech (joakim.xx.bech@stericsson.com)
* Author: Berne Hebark (berne.hebark@stericsson.com))
* License terms: GNU General Public License (GPL) version 2
*/
#ifndef _HASH_ALG_H
#define _HASH_ALG_H
#include <linux/bitops.h>
#define HASH_BLOCK_SIZE 64
#define HASH_DMA_FIFO 4
#define HASH_DMA_ALIGN_SIZE 4
#define HASH_DMA_PERFORMANCE_MIN_SIZE 1024
#define HASH_BYTES_PER_WORD 4
/* Maximum value of the length's high word */
#define HASH_HIGH_WORD_MAX_VAL 0xFFFFFFFFUL
/* Power on Reset values HASH registers */
#define HASH_RESET_CR_VALUE 0x0
#define HASH_RESET_STR_VALUE 0x0
/* Number of context swap registers */
#define HASH_CSR_COUNT 52
#define HASH_RESET_CSRX_REG_VALUE 0x0
#define HASH_RESET_CSFULL_REG_VALUE 0x0
#define HASH_RESET_CSDATAIN_REG_VALUE 0x0
#define HASH_RESET_INDEX_VAL 0x0
#define HASH_RESET_BIT_INDEX_VAL 0x0
#define HASH_RESET_BUFFER_VAL 0x0
#define HASH_RESET_LEN_HIGH_VAL 0x0
#define HASH_RESET_LEN_LOW_VAL 0x0
/* Control register bitfields */
#define HASH_CR_RESUME_MASK 0x11FCF
#define HASH_CR_SWITCHON_POS 31
#define HASH_CR_SWITCHON_MASK BIT(31)
#define HASH_CR_EMPTYMSG_POS 20
#define HASH_CR_EMPTYMSG_MASK BIT(20)
#define HASH_CR_DINF_POS 12
#define HASH_CR_DINF_MASK BIT(12)
#define HASH_CR_NBW_POS 8
#define HASH_CR_NBW_MASK 0x00000F00UL
#define HASH_CR_LKEY_POS 16
#define HASH_CR_LKEY_MASK BIT(16)
#define HASH_CR_ALGO_POS 7
#define HASH_CR_ALGO_MASK BIT(7)
#define HASH_CR_MODE_POS 6
#define HASH_CR_MODE_MASK BIT(6)
#define HASH_CR_DATAFORM_POS 4
#define HASH_CR_DATAFORM_MASK (BIT(4) | BIT(5))
#define HASH_CR_DMAE_POS 3
#define HASH_CR_DMAE_MASK BIT(3)
#define HASH_CR_INIT_POS 2
#define HASH_CR_INIT_MASK BIT(2)
#define HASH_CR_PRIVN_POS 1
#define HASH_CR_PRIVN_MASK BIT(1)
#define HASH_CR_SECN_POS 0
#define HASH_CR_SECN_MASK BIT(0)
/* Start register bitfields */
#define HASH_STR_DCAL_POS 8
#define HASH_STR_DCAL_MASK BIT(8)
#define HASH_STR_DEFAULT 0x0
#define HASH_STR_NBLW_POS 0
#define HASH_STR_NBLW_MASK 0x0000001FUL
#define HASH_NBLW_MAX_VAL 0x1F
/* PrimeCell IDs */
#define HASH_P_ID0 0xE0
#define HASH_P_ID1 0x05
#define HASH_P_ID2 0x38
#define HASH_P_ID3 0x00
#define HASH_CELL_ID0 0x0D
#define HASH_CELL_ID1 0xF0
#define HASH_CELL_ID2 0x05
#define HASH_CELL_ID3 0xB1
#define HASH_SET_BITS(reg_name, mask) \
writel_relaxed((readl_relaxed(reg_name) | mask), reg_name)
#define HASH_CLEAR_BITS(reg_name, mask) \
writel_relaxed((readl_relaxed(reg_name) & ~mask), reg_name)
#define HASH_PUT_BITS(reg, val, shift, mask) \
writel_relaxed(((readl(reg) & ~(mask)) | \
(((u32)val << shift) & (mask))), reg)
#define HASH_SET_DIN(val, len) writesl(&device_data->base->din, (val), (len))
#define HASH_INITIALIZE \
HASH_PUT_BITS( \
&device_data->base->cr, \
0x01, HASH_CR_INIT_POS, \
HASH_CR_INIT_MASK)
#define HASH_SET_DATA_FORMAT(data_format) \
HASH_PUT_BITS( \
&device_data->base->cr, \
(u32) (data_format), HASH_CR_DATAFORM_POS, \
HASH_CR_DATAFORM_MASK)
#define HASH_SET_NBLW(val) \
HASH_PUT_BITS( \
&device_data->base->str, \
(u32) (val), HASH_STR_NBLW_POS, \
HASH_STR_NBLW_MASK)
#define HASH_SET_DCAL \
HASH_PUT_BITS( \
&device_data->base->str, \
0x01, HASH_STR_DCAL_POS, \
HASH_STR_DCAL_MASK)
/* Hardware access method */
enum hash_mode {
HASH_MODE_CPU,
HASH_MODE_DMA
};
/**
* struct uint64 - Structure to handle 64 bits integers.
* @high_word: Most significant bits.
* @low_word: Least significant bits.
*
* Used to handle 64 bits integers.
*/
struct uint64 {
u32 high_word;
u32 low_word;
};
/**
* struct hash_register - Contains all registers in ux500 hash hardware.
* @cr: HASH control register (0x000).
* @din: HASH data input register (0x004).
* @str: HASH start register (0x008).
* @hx: HASH digest register 0..7 (0x00c-0x01C).
* @padding0: Reserved (0x02C).
* @itcr: Integration test control register (0x080).
* @itip: Integration test input register (0x084).
* @itop: Integration test output register (0x088).
* @padding1: Reserved (0x08C).
* @csfull: HASH context full register (0x0F8).
* @csdatain: HASH context swap data input register (0x0FC).
* @csrx: HASH context swap register 0..51 (0x100-0x1CC).
* @padding2: Reserved (0x1D0).
* @periphid0: HASH peripheral identification register 0 (0xFE0).
* @periphid1: HASH peripheral identification register 1 (0xFE4).
* @periphid2: HASH peripheral identification register 2 (0xFE8).
* @periphid3: HASH peripheral identification register 3 (0xFEC).
* @cellid0: HASH PCell identification register 0 (0xFF0).
* @cellid1: HASH PCell identification register 1 (0xFF4).
* @cellid2: HASH PCell identification register 2 (0xFF8).
* @cellid3: HASH PCell identification register 3 (0xFFC).
*
* The device communicates to the HASH via 32-bit-wide control registers
* accessible via the 32-bit width AMBA rev. 2.0 AHB Bus. Below is a structure
* with the registers used.
*/
struct hash_register {
u32 cr;
u32 din;
u32 str;
u32 hx[8];
u32 padding0[(0x080 - 0x02C) / sizeof(u32)];
u32 itcr;
u32 itip;
u32 itop;
u32 padding1[(0x0F8 - 0x08C) / sizeof(u32)];
u32 csfull;
u32 csdatain;
u32 csrx[HASH_CSR_COUNT];
u32 padding2[(0xFE0 - 0x1D0) / sizeof(u32)];
u32 periphid0;
u32 periphid1;
u32 periphid2;
u32 periphid3;
u32 cellid0;
u32 cellid1;
u32 cellid2;
u32 cellid3;
};
/**
* struct hash_state - Hash context state.
* @temp_cr: Temporary HASH Control Register.
* @str_reg: HASH Start Register.
* @din_reg: HASH Data Input Register.
* @csr[52]: HASH Context Swap Registers 0-39.
* @csfull: HASH Context Swap Registers 40 ie Status flags.
* @csdatain: HASH Context Swap Registers 41 ie Input data.
* @buffer: Working buffer for messages going to the hardware.
* @length: Length of the part of message hashed so far (floor(N/64) * 64).
* @index: Valid number of bytes in buffer (N % 64).
* @bit_index: Valid number of bits in buffer (N % 8).
*
* This structure is used between context switches, i.e. when ongoing jobs are
* interupted with new jobs. When this happens we need to store intermediate
* results in software.
*
* WARNING: "index" is the member of the structure, to be sure that "buffer"
* is aligned on a 4-bytes boundary. This is highly implementation dependent
* and MUST be checked whenever this code is ported on new platforms.
*/
struct hash_state {
u32 temp_cr;
u32 str_reg;
u32 din_reg;
u32 csr[52];
u32 csfull;
u32 csdatain;
u32 buffer[HASH_BLOCK_SIZE / sizeof(u32)];
struct uint64 length;
u8 index;
u8 bit_index;
};
/**
* enum hash_device_id - HASH device ID.
* @HASH_DEVICE_ID_0: Hash hardware with ID 0
* @HASH_DEVICE_ID_1: Hash hardware with ID 1
*/
enum hash_device_id {
HASH_DEVICE_ID_0 = 0,
HASH_DEVICE_ID_1 = 1
};
/**
* enum hash_data_format - HASH data format.
* @HASH_DATA_32_BITS: 32 bits data format
* @HASH_DATA_16_BITS: 16 bits data format
* @HASH_DATA_8_BITS: 8 bits data format.
* @HASH_DATA_1_BITS: 1 bit data format.
*/
enum hash_data_format {
HASH_DATA_32_BITS = 0x0,
HASH_DATA_16_BITS = 0x1,
HASH_DATA_8_BITS = 0x2,
HASH_DATA_1_BIT = 0x3
};
/**
* enum hash_algo - Enumeration for selecting between SHA1 or SHA2 algorithm.
* @HASH_ALGO_SHA1: Indicates that SHA1 is used.
* @HASH_ALGO_SHA2: Indicates that SHA2 (SHA256) is used.
*/
enum hash_algo {
HASH_ALGO_SHA1 = 0x0,
HASH_ALGO_SHA256 = 0x1
};
/**
* enum hash_op - Enumeration for selecting between HASH or HMAC mode.
* @HASH_OPER_MODE_HASH: Indicates usage of normal HASH mode.
* @HASH_OPER_MODE_HMAC: Indicates usage of HMAC.
*/
enum hash_op {
HASH_OPER_MODE_HASH = 0x0,
HASH_OPER_MODE_HMAC = 0x1
};
/**
* struct hash_config - Configuration data for the hardware.
* @data_format: Format of data entered into the hash data in register.
* @algorithm: Algorithm selection bit.
* @oper_mode: Operating mode selection bit.
*/
struct hash_config {
int data_format;
int algorithm;
int oper_mode;
};
/**
* struct hash_dma - Structure used for dma.
* @mask: DMA capabilities bitmap mask.
* @complete: Used to maintain state for a "completion".
* @chan_mem2hash: DMA channel.
* @cfg_mem2hash: DMA channel configuration.
* @sg_len: Scatterlist length.
* @sg: Scatterlist.
* @nents: Number of sg entries.
*/
struct hash_dma {
dma_cap_mask_t mask;
struct completion complete;
struct dma_chan *chan_mem2hash;
void *cfg_mem2hash;
int sg_len;
struct scatterlist *sg;
int nents;
};
/**
* struct hash_ctx - The context used for hash calculations.
* @key: The key used in the operation.
* @keylen: The length of the key.
* @state: The state of the current calculations.
* @config: The current configuration.
* @digestsize: The size of current digest.
* @device: Pointer to the device structure.
*/
struct hash_ctx {
u8 *key;
u32 keylen;
struct hash_config config;
int digestsize;
struct hash_device_data *device;
};
/**
* struct hash_ctx - The request context used for hash calculations.
* @state: The state of the current calculations.
* @dma_mode: Used in special cases (workaround), e.g. need to change to
* cpu mode, if not supported/working in dma mode.
* @updated: Indicates if hardware is initialized for new operations.
*/
struct hash_req_ctx {
struct hash_state state;
bool dma_mode;
u8 updated;
};
/**
* struct hash_device_data - structure for a hash device.
* @base: Pointer to virtual base address of the hash device.
* @phybase: Pointer to physical memory location of the hash device.
* @list_node: For inclusion in klist.
* @dev: Pointer to the device dev structure.
* @ctx_lock: Spinlock for current_ctx.
* @current_ctx: Pointer to the currently allocated context.
* @power_state: TRUE = power state on, FALSE = power state off.
* @power_state_lock: Spinlock for power_state.
* @regulator: Pointer to the device's power control.
* @clk: Pointer to the device's clock control.
* @restore_dev_state: TRUE = saved state, FALSE = no saved state.
* @dma: Structure used for dma.
*/
struct hash_device_data {
struct hash_register __iomem *base;
phys_addr_t phybase;
struct klist_node list_node;
struct device *dev;
struct spinlock ctx_lock;
struct hash_ctx *current_ctx;
bool power_state;
struct spinlock power_state_lock;
struct regulator *regulator;
struct clk *clk;
bool restore_dev_state;
struct hash_state state; /* Used for saving and resuming state */
struct hash_dma dma;
};
int hash_check_hw(struct hash_device_data *device_data);
int hash_setconfiguration(struct hash_device_data *device_data,
struct hash_config *config);
void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx);
void hash_get_digest(struct hash_device_data *device_data,
u8 *digest, int algorithm);
int hash_hw_update(struct ahash_request *req);
int hash_save_state(struct hash_device_data *device_data,
struct hash_state *state);
int hash_resume_state(struct hash_device_data *device_data,
const struct hash_state *state);
#endif
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Andreas Westin | 785 | 98.99% | 1 | 50.00% |
| Lee Jones | 8 | 1.01% | 1 | 50.00% |
| Total | 793 | 100.00% | 2 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.