Release 4.11 drivers/dma/fsl_raid.h
/*
* drivers/dma/fsl_raid.h
*
* Freescale RAID Engine device driver
*
* Author:
* Harninder Rai <harninder.rai@freescale.com>
* Naveen Burmi <naveenburmi@freescale.com>
*
* Rewrite:
* Xuelin Shi <xuelin.shi@freescale.com>
* Copyright (c) 2010-2012 Freescale Semiconductor, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#define FSL_RE_MAX_CHANS 4
#define FSL_RE_DPAA_MODE BIT(30)
#define FSL_RE_NON_DPAA_MODE BIT(31)
#define FSL_RE_GFM_POLY 0x1d000000
#define FSL_RE_ADD_JOB(x) ((x) << 16)
#define FSL_RE_RMVD_JOB(x) ((x) << 16)
#define FSL_RE_CFG1_CBSI 0x08000000
#define FSL_RE_CFG1_CBS0 0x00080000
#define FSL_RE_SLOT_FULL_SHIFT 8
#define FSL_RE_SLOT_FULL(x) ((x) >> FSL_RE_SLOT_FULL_SHIFT)
#define FSL_RE_SLOT_AVAIL_SHIFT 8
#define FSL_RE_SLOT_AVAIL(x) ((x) >> FSL_RE_SLOT_AVAIL_SHIFT)
#define FSL_RE_PQ_OPCODE 0x1B
#define FSL_RE_XOR_OPCODE 0x1A
#define FSL_RE_MOVE_OPCODE 0x8
#define FSL_RE_FRAME_ALIGN 16
#define FSL_RE_BLOCK_SIZE 0x3
/* 4096 bytes */
#define FSL_RE_CACHEABLE_IO 0x0
#define FSL_RE_BUFFER_OUTPUT 0x0
#define FSL_RE_INTR_ON_ERROR 0x1
#define FSL_RE_DATA_DEP 0x1
#define FSL_RE_ENABLE_DPI 0x0
#define FSL_RE_RING_SIZE 0x400
#define FSL_RE_RING_SIZE_MASK (FSL_RE_RING_SIZE - 1)
#define FSL_RE_RING_SIZE_SHIFT 8
#define FSL_RE_ADDR_BIT_SHIFT 4
#define FSL_RE_ADDR_BIT_MASK (BIT(FSL_RE_ADDR_BIT_SHIFT) - 1)
#define FSL_RE_ERROR 0x40000000
#define FSL_RE_INTR 0x80000000
#define FSL_RE_CLR_INTR 0x80000000
#define FSL_RE_PAUSE 0x80000000
#define FSL_RE_ENABLE 0x80000000
#define FSL_RE_REG_LIODN_MASK 0x00000FFF
#define FSL_RE_CDB_OPCODE_MASK 0xF8000000
#define FSL_RE_CDB_OPCODE_SHIFT 27
#define FSL_RE_CDB_EXCLEN_MASK 0x03000000
#define FSL_RE_CDB_EXCLEN_SHIFT 24
#define FSL_RE_CDB_EXCLQ1_MASK 0x00F00000
#define FSL_RE_CDB_EXCLQ1_SHIFT 20
#define FSL_RE_CDB_EXCLQ2_MASK 0x000F0000
#define FSL_RE_CDB_EXCLQ2_SHIFT 16
#define FSL_RE_CDB_BLKSIZE_MASK 0x0000C000
#define FSL_RE_CDB_BLKSIZE_SHIFT 14
#define FSL_RE_CDB_CACHE_MASK 0x00003000
#define FSL_RE_CDB_CACHE_SHIFT 12
#define FSL_RE_CDB_BUFFER_MASK 0x00000800
#define FSL_RE_CDB_BUFFER_SHIFT 11
#define FSL_RE_CDB_ERROR_MASK 0x00000400
#define FSL_RE_CDB_ERROR_SHIFT 10
#define FSL_RE_CDB_NRCS_MASK 0x0000003C
#define FSL_RE_CDB_NRCS_SHIFT 6
#define FSL_RE_CDB_DEPEND_MASK 0x00000008
#define FSL_RE_CDB_DEPEND_SHIFT 3
#define FSL_RE_CDB_DPI_MASK 0x00000004
#define FSL_RE_CDB_DPI_SHIFT 2
/*
* the largest cf block is 19*sizeof(struct cmpnd_frame), which is 304 bytes.
* here 19 = 1(cdb)+2(dest)+16(src), align to 64bytes, that is 320 bytes.
* the largest cdb block: struct pq_cdb which is 180 bytes, adding to cf block
* 320+180=500, align to 64bytes, that is 512 bytes.
*/
#define FSL_RE_CF_DESC_SIZE 320
#define FSL_RE_CF_CDB_SIZE 512
#define FSL_RE_CF_CDB_ALIGN 64
struct fsl_re_ctrl {
/* General Configuration Registers */
__be32 global_config; /* Global Configuration Register */
u8 rsvd1[4];
__be32 galois_field_config; /* Galois Field Configuration Register */
u8 rsvd2[4];
__be32 jq_wrr_config; /* WRR Configuration register */
u8 rsvd3[4];
__be32 crc_config; /* CRC Configuration register */
u8 rsvd4[228];
__be32 system_reset; /* System Reset Register */
u8 rsvd5[252];
__be32 global_status; /* Global Status Register */
u8 rsvd6[832];
__be32 re_liodn_base; /* LIODN Base Register */
u8 rsvd7[1712];
__be32 re_version_id; /* Version ID register of RE */
__be32 re_version_id_2; /* Version ID 2 register of RE */
u8 rsvd8[512];
__be32 host_config; /* Host I/F Configuration Register */
};
struct fsl_re_chan_cfg {
/* Registers for JR interface */
__be32 jr_config_0; /* Job Queue Configuration 0 Register */
__be32 jr_config_1; /* Job Queue Configuration 1 Register */
__be32 jr_interrupt_status; /* Job Queue Interrupt Status Register */
u8 rsvd1[4];
__be32 jr_command; /* Job Queue Command Register */
u8 rsvd2[4];
__be32 jr_status; /* Job Queue Status Register */
u8 rsvd3[228];
/* Input Ring */
__be32 inbring_base_h; /* Inbound Ring Base Address Register - High */
__be32 inbring_base_l; /* Inbound Ring Base Address Register - Low */
__be32 inbring_size; /* Inbound Ring Size Register */
u8 rsvd4[4];
__be32 inbring_slot_avail; /* Inbound Ring Slot Available Register */
u8 rsvd5[4];
__be32 inbring_add_job; /* Inbound Ring Add Job Register */
u8 rsvd6[4];
__be32 inbring_cnsmr_indx; /* Inbound Ring Consumer Index Register */
u8 rsvd7[220];
/* Output Ring */
__be32 oubring_base_h; /* Outbound Ring Base Address Register - High */
__be32 oubring_base_l; /* Outbound Ring Base Address Register - Low */
__be32 oubring_size; /* Outbound Ring Size Register */
u8 rsvd8[4];
__be32 oubring_job_rmvd; /* Outbound Ring Job Removed Register */
u8 rsvd9[4];
__be32 oubring_slot_full; /* Outbound Ring Slot Full Register */
u8 rsvd10[4];
__be32 oubring_prdcr_indx; /* Outbound Ring Producer Index */
};
/*
* Command Descriptor Block (CDB) for unicast move command.
* In RAID Engine terms, memcpy is done through move command
*/
struct fsl_re_move_cdb {
__be32 cdb32;
};
/* Data protection/integrity related fields */
#define FSL_RE_DPI_APPS_MASK 0xC0000000
#define FSL_RE_DPI_APPS_SHIFT 30
#define FSL_RE_DPI_REF_MASK 0x30000000
#define FSL_RE_DPI_REF_SHIFT 28
#define FSL_RE_DPI_GUARD_MASK 0x0C000000
#define FSL_RE_DPI_GUARD_SHIFT 26
#define FSL_RE_DPI_ATTR_MASK 0x03000000
#define FSL_RE_DPI_ATTR_SHIFT 24
#define FSL_RE_DPI_META_MASK 0x0000FFFF
struct fsl_re_dpi {
__be32 dpi32;
__be32 ref;
};
/*
* CDB for GenQ command. In RAID Engine terminology, XOR is
* done through this command
*/
struct fsl_re_xor_cdb {
__be32 cdb32;
u8 gfm[16];
struct fsl_re_dpi dpi_dest_spec;
struct fsl_re_dpi dpi_src_spec[16];
};
/* CDB for no-op command */
struct fsl_re_noop_cdb {
__be32 cdb32;
};
/*
* CDB for GenQQ command. In RAID Engine terminology, P/Q is
* done through this command
*/
struct fsl_re_pq_cdb {
__be32 cdb32;
u8 gfm_q1[16];
u8 gfm_q2[16];
struct fsl_re_dpi dpi_dest_spec[2];
struct fsl_re_dpi dpi_src_spec[16];
};
/* Compound frame */
#define FSL_RE_CF_ADDR_HIGH_MASK 0x000000FF
#define FSL_RE_CF_EXT_MASK 0x80000000
#define FSL_RE_CF_EXT_SHIFT 31
#define FSL_RE_CF_FINAL_MASK 0x40000000
#define FSL_RE_CF_FINAL_SHIFT 30
#define FSL_RE_CF_LENGTH_MASK 0x000FFFFF
#define FSL_RE_CF_BPID_MASK 0x00FF0000
#define FSL_RE_CF_BPID_SHIFT 16
#define FSL_RE_CF_OFFSET_MASK 0x00001FFF
struct fsl_re_cmpnd_frame {
__be32 addr_high;
__be32 addr_low;
__be32 efrl32;
__be32 rbro32;
};
/* Frame descriptor */
#define FSL_RE_HWDESC_LIODN_MASK 0x3F000000
#define FSL_RE_HWDESC_LIODN_SHIFT 24
#define FSL_RE_HWDESC_BPID_MASK 0x00FF0000
#define FSL_RE_HWDESC_BPID_SHIFT 16
#define FSL_RE_HWDESC_ELIODN_MASK 0x0000F000
#define FSL_RE_HWDESC_ELIODN_SHIFT 12
#define FSL_RE_HWDESC_FMT_SHIFT 29
#define FSL_RE_HWDESC_FMT_MASK (0x3 << FSL_RE_HWDESC_FMT_SHIFT)
struct fsl_re_hw_desc {
__be32 lbea32;
__be32 addr_low;
__be32 fmt32;
__be32 status;
};
/* Raid Engine device private data */
struct fsl_re_drv_private {
u8 total_chans;
struct dma_device dma_dev;
struct fsl_re_ctrl *re_regs;
struct fsl_re_chan *re_jrs[FSL_RE_MAX_CHANS];
struct dma_pool *cf_desc_pool;
struct dma_pool *hw_desc_pool;
};
/* Per job ring data structure */
struct fsl_re_chan {
char name[16];
spinlock_t desc_lock; /* queue lock */
struct list_head ack_q; /* wait to acked queue */
struct list_head active_q; /* already issued on hw, not completed */
struct list_head submit_q;
struct list_head free_q; /* alloc available queue */
struct device *dev;
struct fsl_re_drv_private *re_dev;
struct dma_chan chan;
struct fsl_re_chan_cfg *jrregs;
int irq;
struct tasklet_struct irqtask;
u32 alloc_count;
/* hw descriptor ring for inbound queue*/
dma_addr_t inb_phys_addr;
struct fsl_re_hw_desc *inb_ring_virt_addr;
u32 inb_count;
/* hw descriptor ring for outbound queue */
dma_addr_t oub_phys_addr;
struct fsl_re_hw_desc *oub_ring_virt_addr;
u32 oub_count;
};
/* Async transaction descriptor */
struct fsl_re_desc {
struct dma_async_tx_descriptor async_tx;
struct list_head node;
struct fsl_re_hw_desc hwdesc;
struct fsl_re_chan *re_chan;
/* hwdesc will point to cf_addr */
void *cf_addr;
dma_addr_t cf_paddr;
void *cdb_addr;
dma_addr_t cdb_paddr;
int status;
};
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Xuelin Shi | 873 | 100.00% | 1 | 100.00% |
| Total | 873 | 100.00% | 1 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.