Release 4.11 drivers/gpu/drm/gma500/cdv_intel_lvds.c

/*
 * Copyright © 2006-2011 Intel Corporation
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Authors:
 *      Eric Anholt <eric@anholt.net>
 *      Dave Airlie <airlied@linux.ie>
 *      Jesse Barnes <jesse.barnes@intel.com>
 */

#include <linux/i2c.h>
#include <linux/dmi.h>
#include <drm/drmP.h>

#include "intel_bios.h"
#include "psb_drv.h"
#include "psb_intel_drv.h"
#include "psb_intel_reg.h"
#include "power.h"
#include <linux/pm_runtime.h>
#include "cdv_device.h"

/**
 * LVDS I2C backlight control macros
 */

#define BRIGHTNESS_MAX_LEVEL 100

#define BRIGHTNESS_MASK 0xFF

#define BLC_I2C_TYPE	0x01

#define BLC_PWM_TYPT	0x02


#define BLC_POLARITY_NORMAL 0

#define BLC_POLARITY_INVERSE 1


#define PSB_BLC_MAX_PWM_REG_FREQ       (0xFFFE)

#define PSB_BLC_MIN_PWM_REG_FREQ	(0x2)

#define PSB_BLC_PWM_PRECISION_FACTOR	(10)

#define PSB_BACKLIGHT_PWM_CTL_SHIFT	(16)

#define PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)


struct cdv_intel_lvds_priv {
	/**
         * Saved LVDO output states
         */
	
uint32_t savePP_ON;
	
uint32_t savePP_OFF;
	
uint32_t saveLVDS;
	
uint32_t savePP_CONTROL;
	
uint32_t savePP_CYCLE;
	
uint32_t savePFIT_CONTROL;
	
uint32_t savePFIT_PGM_RATIOS;
	
uint32_t saveBLC_PWM_CTL;
};

/*
 * Returns the maximum level of the backlight duty cycle field.
 */


static u32 cdv_intel_lvds_get_max_backlight(struct drm_device *dev)
{
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 retval;

	if (gma_power_begin(dev, false)) {
		retval = ((REG_READ(BLC_PWM_CTL) &
			  BACKLIGHT_MODULATION_FREQ_MASK) >>
			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;

		gma_power_end(dev);
	} else
		retval = ((dev_priv->regs.saveBLC_PWM_CTL &
			  BACKLIGHT_MODULATION_FREQ_MASK) >>
			  BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;

	return retval;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
78
100.00%
2
100.00%
Total
78
100.00%
2
100.00%

#if 0
/*
 * Set LVDS backlight level by I2C command
 */
static int cdv_lvds_i2c_set_brightness(struct drm_device *dev,
                                        unsigned int level)
{
        struct drm_psb_private *dev_priv = dev->dev_private;
        struct psb_intel_i2c_chan *lvds_i2c_bus = dev_priv->lvds_i2c_bus;
        u8 out_buf[2];
        unsigned int blc_i2c_brightness;

        struct i2c_msg msgs[] = {
                {
                        .addr = lvds_i2c_bus->slave_addr,
                        .flags = 0,
                        .len = 2,
                        .buf = out_buf,
                }
        };

        blc_i2c_brightness = BRIGHTNESS_MASK & ((unsigned int)level *
                             BRIGHTNESS_MASK /
                             BRIGHTNESS_MAX_LEVEL);

        if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
                blc_i2c_brightness = BRIGHTNESS_MASK - blc_i2c_brightness;

        out_buf[0] = dev_priv->lvds_bl->brightnesscmd;
        out_buf[1] = (u8)blc_i2c_brightness;

        if (i2c_transfer(&lvds_i2c_bus->adapter, msgs, 1) == 1)
                return 0;

        DRM_ERROR("I2C transfer error\n");
        return -1;
}


static int cdv_lvds_pwm_set_brightness(struct drm_device *dev, int level)
{
        struct drm_psb_private *dev_priv = dev->dev_private;

        u32 max_pwm_blc;
        u32 blc_pwm_duty_cycle;

        max_pwm_blc = cdv_intel_lvds_get_max_backlight(dev);

	/*BLC_PWM_CTL Should be initiated while backlight device init*/
	BUG_ON((max_pwm_blc & PSB_BLC_MAX_PWM_REG_FREQ) == 0);

        blc_pwm_duty_cycle = level * max_pwm_blc / BRIGHTNESS_MAX_LEVEL;

        if (dev_priv->lvds_bl->pol == BLC_POLARITY_INVERSE)
                blc_pwm_duty_cycle = max_pwm_blc - blc_pwm_duty_cycle;

        blc_pwm_duty_cycle &= PSB_BACKLIGHT_PWM_POLARITY_BIT_CLEAR;
        REG_WRITE(BLC_PWM_CTL,
                  (max_pwm_blc << PSB_BACKLIGHT_PWM_CTL_SHIFT) |
                  (blc_pwm_duty_cycle));

        return 0;
}

/*
 * Set LVDS backlight level either by I2C or PWM
 */
void cdv_intel_lvds_set_brightness(struct drm_device *dev, int level)
{
        struct drm_psb_private *dev_priv = dev->dev_private;

        if (!dev_priv->lvds_bl) {
                DRM_ERROR("NO LVDS Backlight Info\n");
                return;
        }

        if (dev_priv->lvds_bl->type == BLC_I2C_TYPE)
                cdv_lvds_i2c_set_brightness(dev, level);
        else
                cdv_lvds_pwm_set_brightness(dev, level);
}
#endif

/**
 * Sets the backlight level.
 *
 * level backlight level, from 0 to cdv_intel_lvds_get_max_backlight().
 */


static void cdv_intel_lvds_set_backlight(struct drm_device *dev, int level)
{
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 blc_pwm_ctl;

	if (gma_power_begin(dev, false)) {
		blc_pwm_ctl =
			REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK;
		REG_WRITE(BLC_PWM_CTL,
				(blc_pwm_ctl |
				(level << BACKLIGHT_DUTY_CYCLE_SHIFT)));
		gma_power_end(dev);
	} else {
		blc_pwm_ctl = dev_priv->regs.saveBLC_PWM_CTL &
				~BACKLIGHT_DUTY_CYCLE_MASK;
		dev_priv->regs.saveBLC_PWM_CTL = (blc_pwm_ctl |
					(level << BACKLIGHT_DUTY_CYCLE_SHIFT));
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
97
100.00%
2
100.00%
Total
97
100.00%
2
100.00%

/**
 * Sets the power state for the panel.
 */


static void cdv_intel_lvds_set_power(struct drm_device *dev,
				     struct drm_encoder *encoder, bool on)
{
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 pp_status;

	if (!gma_power_begin(dev, true))
		return;

	if (on) {
		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) |
			  POWER_TARGET_ON);
		do {
			pp_status = REG_READ(PP_STATUS);
		} while ((pp_status & PP_ON) == 0);

		cdv_intel_lvds_set_backlight(dev,
				dev_priv->mode_dev.backlight_duty_cycle);
	} else {
		cdv_intel_lvds_set_backlight(dev, 0);

		REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) &
			  ~POWER_TARGET_ON);
		do {
			pp_status = REG_READ(PP_STATUS);
		} while (pp_status & PP_ON);
	}
	gma_power_end(dev);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
124
90.51%
1
50.00%
Patrik Jakobsson
13
9.49%
1
50.00%
Total
137
100.00%
2
100.00%



static void cdv_intel_lvds_encoder_dpms(struct drm_encoder *encoder, int mode)
{
	struct drm_device *dev = encoder->dev;
	if (mode == DRM_MODE_DPMS_ON)
		cdv_intel_lvds_set_power(dev, encoder, true);
	else
		cdv_intel_lvds_set_power(dev, encoder, false);
	/* XXX: We never power down the LVDS pairs. */
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
47
95.92%
1
50.00%
Patrik Jakobsson
2
4.08%
1
50.00%
Total
49
100.00%
2
100.00%



static void cdv_intel_lvds_save(struct drm_connector *connector)
{
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
10
100.00%
1
100.00%
Total
10
100.00%
1
100.00%



static void cdv_intel_lvds_restore(struct drm_connector *connector)
{
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
10
100.00%
1
100.00%
Total
10
100.00%
1
100.00%



static int cdv_intel_lvds_mode_valid(struct drm_connector *connector,
			      struct drm_display_mode *mode)
{
	struct drm_device *dev = connector->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct drm_display_mode *fixed_mode =
					dev_priv->mode_dev.panel_fixed_mode;

	/* just in case */
	if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
		return MODE_NO_DBLESCAN;

	/* just in case */
	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
		return MODE_NO_INTERLACE;

	if (fixed_mode) {
		if (mode->hdisplay > fixed_mode->hdisplay)
			return MODE_PANEL;
		if (mode->vdisplay > fixed_mode->vdisplay)
			return MODE_PANEL;
	}
	return MODE_OK;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
88
84.62%
1
33.33%
Patrik Jakobsson
15
14.42%
1
33.33%
Kirill A. Shutemov
1
0.96%
1
33.33%
Total
104
100.00%
3
100.00%



static bool cdv_intel_lvds_mode_fixup(struct drm_encoder *encoder,
				  const struct drm_display_mode *mode,
				  struct drm_display_mode *adjusted_mode)
{
	struct drm_device *dev = encoder->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
	struct drm_encoder *tmp_encoder;
	struct drm_display_mode *panel_fixed_mode = mode_dev->panel_fixed_mode;

	/* Should never happen!! */
	list_for_each_entry(tmp_encoder, &dev->mode_config.encoder_list,
			    head) {
		if (tmp_encoder != encoder
		    && tmp_encoder->crtc == encoder->crtc) {
			printk(KERN_ERR "Can't enable LVDS and another "
			       "encoder on the same pipe\n");
			return false;
		}
	}

	/*
         * If we have timings from the BIOS for the panel, put them in
         * to the adjusted mode.  The CRTC will be set up for this mode,
         * with the panel scaling set up to source from the H/VDisplay
         * of the original mode.
         */
	if (panel_fixed_mode != NULL) {
		adjusted_mode->hdisplay = panel_fixed_mode->hdisplay;
		adjusted_mode->hsync_start = panel_fixed_mode->hsync_start;
		adjusted_mode->hsync_end = panel_fixed_mode->hsync_end;
		adjusted_mode->htotal = panel_fixed_mode->htotal;
		adjusted_mode->vdisplay = panel_fixed_mode->vdisplay;
		adjusted_mode->vsync_start = panel_fixed_mode->vsync_start;
		adjusted_mode->vsync_end = panel_fixed_mode->vsync_end;
		adjusted_mode->vtotal = panel_fixed_mode->vtotal;
		adjusted_mode->clock = panel_fixed_mode->clock;
		drm_mode_set_crtcinfo(adjusted_mode,
				      CRTC_INTERLACE_HALVE_V);
	}

	/*
         * XXX: It would be nice to support lower refresh rates on the
         * panels to reduce power consumption, and perhaps match the
         * user's requested refresh rate.
         */

	return true;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
175
90.67%
1
25.00%
Patrik Jakobsson
16
8.29%
1
25.00%
Kirill A. Shutemov
1
0.52%
1
25.00%
Laurent Pinchart
1
0.52%
1
25.00%
Total
193
100.00%
4
100.00%



static void cdv_intel_lvds_prepare(struct drm_encoder *encoder)
{
	struct drm_device *dev = encoder->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;

	if (!gma_power_begin(dev, true))
		return;

	mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL);
	mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL &
					  BACKLIGHT_DUTY_CYCLE_MASK);

	cdv_intel_lvds_set_power(dev, encoder, false);

	gma_power_end(dev);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
77
90.59%
1
50.00%
Patrik Jakobsson
8
9.41%
1
50.00%
Total
85
100.00%
2
100.00%



static void cdv_intel_lvds_commit(struct drm_encoder *encoder)
{
	struct drm_device *dev = encoder->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;

	if (mode_dev->backlight_duty_cycle == 0)
		mode_dev->backlight_duty_cycle =
		    cdv_intel_lvds_get_max_backlight(dev);

	cdv_intel_lvds_set_power(dev, encoder, true);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
57
87.69%
1
50.00%
Patrik Jakobsson
8
12.31%
1
50.00%
Total
65
100.00%
2
100.00%



static void cdv_intel_lvds_mode_set(struct drm_encoder *encoder,
				struct drm_display_mode *mode,
				struct drm_display_mode *adjusted_mode)
{
	struct drm_device *dev = encoder->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct gma_crtc *gma_crtc = to_gma_crtc(encoder->crtc);
	u32 pfit_control;

	/*
         * The LVDS pin pair will already have been turned on in the
         * cdv_intel_crtc_mode_set since it has a large impact on the DPLL
         * settings.
         */

	/*
         * Enable automatic panel scaling so that non-native modes fill the
         * screen.  Should be enabled before the pipe is enabled, according to
         * register description and PRM.
         */
	if (mode->hdisplay != adjusted_mode->hdisplay ||
	    mode->vdisplay != adjusted_mode->vdisplay)
		pfit_control = (PFIT_ENABLE | VERT_AUTO_SCALE |
				HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR |
				HORIZ_INTERP_BILINEAR);
	else
		pfit_control = 0;

	pfit_control |= gma_crtc->pipe << PFIT_PIPE_SHIFT;

	if (dev_priv->lvds_dither)
		pfit_control |= PANEL_8TO6_DITHER_ENABLE;

	REG_WRITE(PFIT_CONTROL, pfit_control);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
114
96.61%
2
66.67%
Patrik Jakobsson
4
3.39%
1
33.33%
Total
118
100.00%
3
100.00%

/**
 * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
 */


static int cdv_intel_lvds_get_modes(struct drm_connector *connector)
{
	struct drm_device *dev = connector->dev;
	struct drm_psb_private *dev_priv = dev->dev_private;
	struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
	struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev;
	int ret;

	ret = psb_intel_ddc_get_modes(connector, &gma_encoder->i2c_bus->adapter);

	if (ret)
		return ret;

	if (mode_dev->panel_fixed_mode != NULL) {
		struct drm_display_mode *mode =
		    drm_mode_duplicate(dev, mode_dev->panel_fixed_mode);
		drm_mode_probed_add(connector, mode);
		return 1;
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
88
80.00%
1
25.00%
Patrik Jakobsson
22
20.00%
3
75.00%
Total
110
100.00%
4
100.00%

/**
 * cdv_intel_lvds_destroy - unregister and free LVDS structures
 * @connector: connector to free
 *
 * Unregister the DDC bus for this connector then free the driver private
 * structure.
 */


static void cdv_intel_lvds_destroy(struct drm_connector *connector)
{
	struct gma_encoder *gma_encoder = gma_attached_encoder(connector);

	psb_intel_i2c_destroy(gma_encoder->i2c_bus);
	drm_connector_unregister(connector);
	drm_connector_cleanup(connector);
	kfree(connector);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
36
83.72%
1
16.67%
Patrik Jakobsson
5
11.63%
3
50.00%
Kirill A. Shutemov
1
2.33%
1
16.67%
Thomas Wood
1
2.33%
1
16.67%
Total
43
100.00%
6
100.00%



static int cdv_intel_lvds_set_property(struct drm_connector *connector,
				       struct drm_property *property,
				       uint64_t value)
{
	struct drm_encoder *encoder = connector->encoder;

	if (!strcmp(property->name, "scaling mode") && encoder) {
		struct gma_crtc *crtc = to_gma_crtc(encoder->crtc);
		uint64_t curValue;

		if (!crtc)
			return -1;

		switch (value) {
		case DRM_MODE_SCALE_FULLSCREEN:
			break;
		case DRM_MODE_SCALE_NO_SCALE:
			break;
		case DRM_MODE_SCALE_ASPECT:
			break;
		default:
			return -1;
		}

		if (drm_object_property_get_value(&connector->base,
						     property,
						     &curValue))
			return -1;

		if (curValue == value)
			return 0;

		if (drm_object_property_set_value(&connector->base,
							property,
							value))
			return -1;

		if (crtc->saved_mode.hdisplay != 0 &&
		    crtc->saved_mode.vdisplay != 0) {
			if (!drm_crtc_helper_set_mode(encoder->crtc,
						      &crtc->saved_mode,
						      encoder->crtc->x,
						      encoder->crtc->y,
						      encoder->crtc->primary->fb))
				return -1;
		}
	} else if (!strcmp(property->name, "backlight") && encoder) {
		if (drm_object_property_set_value(&connector->base,
							property,
							value))
			return -1;
		else
                        gma_backlight_set(encoder->dev, value);
	} else if (!strcmp(property->name, "DPMS") && encoder) {
		const struct drm_encoder_helper_funcs *helpers =
					encoder->helper_private;
		helpers->dpms(encoder, value);
	}
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
259
92.50%
1
14.29%
Rob Clark
12
4.29%
1
14.29%
Yakui Zhao
3
1.07%
1
14.29%
Matt Roper
2
0.71%
1
14.29%
Patrik Jakobsson
2
0.71%
1
14.29%
Kirill A. Shutemov
1
0.36%
1
14.29%
Jani Nikula
1
0.36%
1
14.29%
Total
280
100.00%
7
100.00%

static const struct drm_encoder_helper_funcs
					
cdv_intel_lvds_helper_funcs = {
	.dpms = cdv_intel_lvds_encoder_dpms,
	.mode_fixup = cdv_intel_lvds_mode_fixup,
	.prepare = cdv_intel_lvds_prepare,
	.mode_set = cdv_intel_lvds_mode_set,
	.commit = cdv_intel_lvds_commit,
};

static const struct drm_connector_helper_funcs
				
cdv_intel_lvds_connector_helper_funcs = {
	.get_modes = cdv_intel_lvds_get_modes,
	.mode_valid = cdv_intel_lvds_mode_valid,
	.best_encoder = gma_best_encoder,
};


static const struct drm_connector_funcs cdv_intel_lvds_connector_funcs = {
	.dpms = drm_helper_connector_dpms,
	.fill_modes = drm_helper_probe_single_connector_modes,
	.set_property = cdv_intel_lvds_set_property,
	.destroy = cdv_intel_lvds_destroy,
};




static void cdv_intel_lvds_enc_destroy(struct drm_encoder *encoder)
{
	drm_encoder_cleanup(encoder);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
16
100.00%
1
100.00%
Total
16
100.00%
1
100.00%


static const struct drm_encoder_funcs cdv_intel_lvds_enc_funcs = {
	.destroy = cdv_intel_lvds_enc_destroy,
};

/*
 * Enumerate the child dev array parsed from VBT to check whether
 * the LVDS is present.
 * If it is present, return 1.
 * If it is not present, return false.
 * If no child dev is parsed from VBT, it assumes that the LVDS is present.
 */


static bool lvds_is_present_in_vbt(struct drm_device *dev,
				   u8 *i2c_pin)
{
	struct drm_psb_private *dev_priv = dev->dev_private;
	int i;

	if (!dev_priv->child_dev_num)
		return true;

	for (i = 0; i < dev_priv->child_dev_num; i++) {
		struct child_device_config *child = dev_priv->child_dev + i;

		/* If the device type is not LFP, continue.
                 * We have to check both the new identifiers as well as the
                 * old for compatibility with some BIOSes.
                 */
		if (child->device_type != DEVICE_TYPE_INT_LFP &&
		    child->device_type != DEVICE_TYPE_LFP)
			continue;

		if (child->i2c_pin)
		    *i2c_pin = child->i2c_pin;

		/* However, we cannot trust the BIOS writers to populate
                 * the VBT correctly.  Since LVDS requires additional
                 * information from AIM blocks, a non-zero addin offset is
                 * a good indicator that the LVDS is actually present.
                 */
		if (child->addin_offset)
			return true;

		/* But even then some BIOS writers perform some black magic
                 * and instantiate the device without reference to any
                 * additional data.  Trust that if the VBT was written into
                 * the OpRegion then they have validated the LVDS's existence.
                 */
		if (dev_priv->opregion.vbt)
			return true;
	}

	return false;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
119
100.00%
1
100.00%
Total
119
100.00%
1
100.00%

/**
 * cdv_intel_lvds_init - setup LVDS connectors on this device
 * @dev: drm device
 *
 * Create the connector, register the LVDS DDC bus, and try to figure out what
 * modes we can display on the LVDS panel (if present).
 */


void cdv_intel_lvds_init(struct drm_device *dev,
		     struct psb_intel_mode_device *mode_dev)
{
	struct gma_encoder *gma_encoder;
	struct gma_connector *gma_connector;
	struct cdv_intel_lvds_priv *lvds_priv;
	struct drm_connector *connector;
	struct drm_encoder *encoder;
	struct drm_display_mode *scan;
	struct drm_crtc *crtc;
	struct drm_psb_private *dev_priv = dev->dev_private;
	u32 lvds;
	int pipe;
	u8 pin;

	pin = GMBUS_PORT_PANEL;
	if (!lvds_is_present_in_vbt(dev, &pin)) {
		DRM_DEBUG_KMS("LVDS is not present in VBT\n");
		return;
	}

	gma_encoder = kzalloc(sizeof(struct gma_encoder),
				    GFP_KERNEL);
	if (!gma_encoder)
		return;

	gma_connector = kzalloc(sizeof(struct gma_connector),
				      GFP_KERNEL);
	if (!gma_connector)
		goto failed_connector;

	lvds_priv = kzalloc(sizeof(struct cdv_intel_lvds_priv), GFP_KERNEL);
	if (!lvds_priv)
		goto failed_lvds_priv;

	gma_encoder->dev_priv = lvds_priv;

	connector = &gma_connector->base;
	gma_connector->save = cdv_intel_lvds_save;
	gma_connector->restore = cdv_intel_lvds_restore;
	encoder = &gma_encoder->base;


	drm_connector_init(dev, connector,
			   &cdv_intel_lvds_connector_funcs,
			   DRM_MODE_CONNECTOR_LVDS);

	drm_encoder_init(dev, encoder,
			 &cdv_intel_lvds_enc_funcs,
			 DRM_MODE_ENCODER_LVDS, NULL);


	gma_connector_attach_encoder(gma_connector, gma_encoder);
	gma_encoder->type = INTEL_OUTPUT_LVDS;

	drm_encoder_helper_add(encoder, &cdv_intel_lvds_helper_funcs);
	drm_connector_helper_add(connector,
				 &cdv_intel_lvds_connector_helper_funcs);
	connector->display_info.subpixel_order = SubPixelHorizontalRGB;
	connector->interlace_allowed = false;
	connector->doublescan_allowed = false;

	/*Attach connector properties*/
	drm_object_attach_property(&connector->base,
				      dev->mode_config.scaling_mode_property,
				      DRM_MODE_SCALE_FULLSCREEN);
	drm_object_attach_property(&connector->base,
				      dev_priv->backlight_property,
				      BRIGHTNESS_MAX_LEVEL);

	/**
         * Set up I2C bus
         * FIXME: distroy i2c_bus when exit
         */
	gma_encoder->i2c_bus = psb_intel_i2c_create(dev,
							 GPIOB,
							 "LVDSBLC_B");
	if (!gma_encoder->i2c_bus) {
		dev_printk(KERN_ERR,
			&dev->pdev->dev, "I2C bus registration failed.\n");
		goto failed_blc_i2c;
	}
	gma_encoder->i2c_bus->slave_addr = 0x2C;
	dev_priv->lvds_i2c_bus = gma_encoder->i2c_bus;

	/*
         * LVDS discovery:
         * 1) check for EDID on DDC
         * 2) check for VBT data
         * 3) check to see if LVDS is already on
         *    if none of the above, no panel
         * 4) make sure lid is open
         *    if closed, act like it's not there for now
         */

	/* Set up the DDC bus. */
	gma_encoder->ddc_bus = psb_intel_i2c_create(dev,
							 GPIOC,
							 "LVDSDDC_C");
	if (!gma_encoder->ddc_bus) {
		dev_printk(KERN_ERR, &dev->pdev->dev,
			   "DDC bus registration " "failed.\n");
		goto failed_ddc;
	}

	/*
         * Attempt to get the fixed panel mode from DDC.  Assume that the
         * preferred mode is the right one.
         */
	mutex_lock(&dev->mode_config.mutex);
	psb_intel_ddc_get_modes(connector,
				&gma_encoder->ddc_bus->adapter);
	list_for_each_entry(scan, &connector->probed_modes, head) {
		if (scan->type & DRM_MODE_TYPE_PREFERRED) {
			mode_dev->panel_fixed_mode =
			    drm_mode_duplicate(dev, scan);
			goto out;	/* FIXME: check for quirks */
		}
	}

	/* Failed to get EDID, what about VBT? do we need this?*/
	if (dev_priv->lfp_lvds_vbt_mode) {
		mode_dev->panel_fixed_mode =
			drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
		if (mode_dev->panel_fixed_mode) {
			mode_dev->panel_fixed_mode->type |=
				DRM_MODE_TYPE_PREFERRED;
			goto out;	/* FIXME: check for quirks */
		}
	}
	/*
         * If we didn't get EDID, try checking if the panel is already turned
         * on.  If so, assume that whatever is currently programmed is the
         * correct mode.
         */
	lvds = REG_READ(LVDS);
	pipe = (lvds & LVDS_PIPEB_SELECT) ? 1 : 0;
	crtc = psb_intel_get_crtc_from_pipe(dev, pipe);

	if (crtc && (lvds & LVDS_PORT_EN)) {
		mode_dev->panel_fixed_mode =
		    cdv_intel_crtc_mode_get(dev, crtc);
		if (mode_dev->panel_fixed_mode) {
			mode_dev->panel_fixed_mode->type |=
			    DRM_MODE_TYPE_PREFERRED;
			goto out;	/* FIXME: check for quirks */
		}
	}

	/* If we still don't have a mode after all that, give up. */
	if (!mode_dev->panel_fixed_mode) {
		DRM_DEBUG
			("Found no modes on the lvds, ignoring the LVDS\n");
		goto failed_find;
	}

	/* setup PWM */
	{
		u32 pwm;

		pwm = REG_READ(BLC_PWM_CTL2);
		if (pipe == 1)
			pwm |= PWM_PIPE_B;
		else
			pwm &= ~PWM_PIPE_B;
		pwm |= PWM_ENABLE;
		REG_WRITE(BLC_PWM_CTL2, pwm);
	}

out:
	mutex_unlock(&dev->mode_config.mutex);
	drm_connector_register(connector);
	return;

failed_find:
	mutex_unlock(&dev->mode_config.mutex);
	printk(KERN_ERR "Failed find\n");
	psb_intel_i2c_destroy(gma_encoder->ddc_bus);
failed_ddc:
	printk(KERN_ERR "Failed DDC\n");
	psb_intel_i2c_destroy(gma_encoder->i2c_bus);
failed_blc_i2c:
	printk(KERN_ERR "Failed BLC\n");
	drm_encoder_cleanup(encoder);
	drm_connector_cleanup(connector);
	kfree(lvds_priv);
failed_lvds_priv:
	kfree(gma_connector);
failed_connector:
	kfree(gma_encoder);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
575
80.65%
3
25.00%
Patrik Jakobsson
85
11.92%
4
33.33%
Daniel Vetter
42
5.89%
2
16.67%
Rob Clark
8
1.12%
1
8.33%
Ville Syrjälä
2
0.28%
1
8.33%
Thomas Wood
1
0.14%
1
8.33%
Total
713
100.00%
12
100.00%

Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Alan Cox
2181
89.09%
4
19.05%
Patrik Jakobsson
181
7.39%
5
23.81%
Daniel Vetter
42
1.72%
2
9.52%
Rob Clark
20
0.82%
1
4.76%
Kirill A. Shutemov
13
0.53%
3
14.29%
Yakui Zhao
3
0.12%
1
4.76%
Matt Roper
2
0.08%
1
4.76%
Thomas Wood
2
0.08%
1
4.76%
Ville Syrjälä
2
0.08%
1
4.76%
Laurent Pinchart
1
0.04%
1
4.76%
Jani Nikula
1
0.04%
1
4.76%
Total
2448
100.00%
21
100.00%
Directory: drivers/gpu/drm/gma500

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.