cregit-Linux how code gets into the kernel

Release 4.11 drivers/gpu/drm/gma500/mdfld_device.c

/**************************************************************************
 * Copyright (c) 2011, Intel Corporation.
 * All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 *
 **************************************************************************/

#include "psb_drv.h"
#include "mid_bios.h"
#include "mdfld_output.h"
#include "mdfld_dsi_output.h"
#include "tc35876x-dsi-lvds.h"

#include <asm/intel_scu_ipc.h>

#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE


#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF

#define BLC_PWM_PRECISION_FACTOR 100	
/* 10000000 */

#define BLC_PWM_FREQ_CALC_CONSTANT 32

#define MHz 1000000

#define BRIGHTNESS_MIN_LEVEL 1

#define BRIGHTNESS_MAX_LEVEL 100

#define BRIGHTNESS_MASK	0xFF

#define BLC_POLARITY_NORMAL 0

#define BLC_POLARITY_INVERSE 1

#define BLC_ADJUSTMENT_MAX 100


#define MDFLD_BLC_PWM_PRECISION_FACTOR    10

#define MDFLD_BLC_MAX_PWM_REG_FREQ        0xFFFE

#define MDFLD_BLC_MIN_PWM_REG_FREQ        0x2


#define MDFLD_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE)

#define MDFLD_BACKLIGHT_PWM_CTL_SHIFT	(16)


static struct backlight_device *mdfld_backlight_device;


int mdfld_set_brightness(struct backlight_device *bd) { struct drm_device *dev = (struct drm_device *)bl_get_data(mdfld_backlight_device); struct drm_psb_private *dev_priv = dev->dev_private; int level = bd->props.brightness; DRM_DEBUG_DRIVER("backlight level set to %d\n", level); /* Perform value bounds checking */ if (level < BRIGHTNESS_MIN_LEVEL) level = BRIGHTNESS_MIN_LEVEL; if (gma_power_begin(dev, false)) { u32 adjusted_level = 0; /* * Adjust the backlight level with the percent in * dev_priv->blc_adj2 */ adjusted_level = level * dev_priv->blc_adj2; adjusted_level = adjusted_level / BLC_ADJUSTMENT_MAX; dev_priv->brightness_adjusted = adjusted_level; if (mdfld_get_panel_type(dev, 0) == TC35876X) { if (dev_priv->dpi_panel_on[0] || dev_priv->dpi_panel_on[2]) tc35876x_brightness_control(dev, dev_priv->brightness_adjusted); } else { if (dev_priv->dpi_panel_on[0]) mdfld_dsi_brightness_control(dev, 0, dev_priv->brightness_adjusted); } if (dev_priv->dpi_panel_on[2]) mdfld_dsi_brightness_control(dev, 2, dev_priv->brightness_adjusted); gma_power_end(dev); } /* cache the brightness for later use */ dev_priv->brightness = level; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov194100.00%1100.00%
Total194100.00%1100.00%


static int mdfld_get_brightness(struct backlight_device *bd) { struct drm_device *dev = (struct drm_device *)bl_get_data(mdfld_backlight_device); struct drm_psb_private *dev_priv = dev->dev_private; DRM_DEBUG_DRIVER("brightness = 0x%x \n", dev_priv->brightness); /* return locally cached var instead of HW read (due to DPST etc.) */ return dev_priv->brightness; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov50100.00%2100.00%
Total50100.00%2100.00%

static const struct backlight_ops mdfld_ops = { .get_brightness = mdfld_get_brightness, .update_status = mdfld_set_brightness, };
static int device_backlight_init(struct drm_device *dev) { struct drm_psb_private *dev_priv = (struct drm_psb_private *) dev->dev_private; dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov40100.00%1100.00%
Total40100.00%1100.00%


static int mdfld_backlight_init(struct drm_device *dev) { struct backlight_properties props; int ret = 0; memset(&props, 0, sizeof(struct backlight_properties)); props.max_brightness = BRIGHTNESS_MAX_LEVEL; props.type = BACKLIGHT_PLATFORM; mdfld_backlight_device = backlight_device_register("mdfld-bl", NULL, (void *)dev, &mdfld_ops, &props); if (IS_ERR(mdfld_backlight_device)) return PTR_ERR(mdfld_backlight_device); ret = device_backlight_init(dev); if (ret) return ret; mdfld_backlight_device->props.brightness = BRIGHTNESS_MAX_LEVEL; mdfld_backlight_device->props.max_brightness = BRIGHTNESS_MAX_LEVEL; backlight_update_status(mdfld_backlight_device); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov118100.00%2100.00%
Total118100.00%2100.00%

#endif
struct backlight_device *mdfld_get_backlight_device(void) { #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE return mdfld_backlight_device; #else return NULL; #endif }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov22100.00%1100.00%
Total22100.00%1100.00%

/* * mdfld_save_display_registers * * Description: We are going to suspend so save current display * register state. * * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio */
static int mdfld_save_display_registers(struct drm_device *dev, int pipenum) { struct drm_psb_private *dev_priv = dev->dev_private; struct medfield_state *regs = &dev_priv->regs.mdfld; struct psb_pipe *pipe = &dev_priv->regs.pipe[pipenum]; const struct psb_offset *map = &dev_priv->regmap[pipenum]; int i; u32 *mipi_val; /* register */ u32 mipi_reg = MIPI; switch (pipenum) { case 0: mipi_val = &regs->saveMIPI; break; case 1: mipi_val = &regs->saveMIPI; break; case 2: /* register */ mipi_reg = MIPI_C; /* pointer to values */ mipi_val = &regs->saveMIPI_C; break; default: DRM_ERROR("%s, invalid pipe number.\n", __func__); return -EINVAL; } /* Pipe & plane A info */ pipe->dpll = PSB_RVDC32(map->dpll); pipe->fp0 = PSB_RVDC32(map->fp0); pipe->conf = PSB_RVDC32(map->conf); pipe->htotal = PSB_RVDC32(map->htotal); pipe->hblank = PSB_RVDC32(map->hblank); pipe->hsync = PSB_RVDC32(map->hsync); pipe->vtotal = PSB_RVDC32(map->vtotal); pipe->vblank = PSB_RVDC32(map->vblank); pipe->vsync = PSB_RVDC32(map->vsync); pipe->src = PSB_RVDC32(map->src); pipe->stride = PSB_RVDC32(map->stride); pipe->linoff = PSB_RVDC32(map->linoff); pipe->tileoff = PSB_RVDC32(map->tileoff); pipe->size = PSB_RVDC32(map->size); pipe->pos = PSB_RVDC32(map->pos); pipe->surf = PSB_RVDC32(map->surf); pipe->cntr = PSB_RVDC32(map->cntr); pipe->status = PSB_RVDC32(map->status); /*save palette (gamma) */ for (i = 0; i < 256; i++) pipe->palette[i] = PSB_RVDC32(map->palette + (i << 2)); if (pipenum == 1) { regs->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); regs->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); regs->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL); regs->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL); return 0; } *mipi_val = PSB_RVDC32(mipi_reg); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov25760.47%125.00%
Alan Cox16839.53%375.00%
Total425100.00%4100.00%

/* * mdfld_restore_display_registers * * Description: We are going to resume so restore display register state. * * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio */
static int mdfld_restore_display_registers(struct drm_device *dev, int pipenum) { /* To get panel out of ULPS mode. */ u32 temp = 0; u32 device_ready_reg = DEVICE_READY_REG; struct drm_psb_private *dev_priv = dev->dev_private; struct mdfld_dsi_config *dsi_config = NULL; struct medfield_state *regs = &dev_priv->regs.mdfld; struct psb_pipe *pipe = &dev_priv->regs.pipe[pipenum]; const struct psb_offset *map = &dev_priv->regmap[pipenum]; u32 i; u32 dpll; u32 timeout = 0; /* register */ u32 mipi_reg = MIPI; /* values */ u32 dpll_val = pipe->dpll; u32 mipi_val = regs->saveMIPI; switch (pipenum) { case 0: dpll_val &= ~DPLL_VCO_ENABLE; dsi_config = dev_priv->dsi_configs[0]; break; case 1: dpll_val &= ~DPLL_VCO_ENABLE; break; case 2: mipi_reg = MIPI_C; mipi_val = regs->saveMIPI_C; dsi_config = dev_priv->dsi_configs[1]; break; default: DRM_ERROR("%s, invalid pipe number.\n", __func__); return -EINVAL; } /*make sure VGA plane is off. it initializes to on after reset!*/ PSB_WVDC32(0x80000000, VGACNTRL); if (pipenum == 1) { PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, map->dpll); PSB_RVDC32(map->dpll); PSB_WVDC32(pipe->fp0, map->fp0); } else { dpll = PSB_RVDC32(map->dpll); if (!(dpll & DPLL_VCO_ENABLE)) { /* When ungating power of DPLL, needs to wait 0.5us before enable the VCO */ if (dpll & MDFLD_PWR_GATE_EN) { dpll &= ~MDFLD_PWR_GATE_EN; PSB_WVDC32(dpll, map->dpll); /* FIXME_MDFLD PO - change 500 to 1 after PO */ udelay(500); } PSB_WVDC32(pipe->fp0, map->fp0); PSB_WVDC32(dpll_val, map->dpll); /* FIXME_MDFLD PO - change 500 to 1 after PO */ udelay(500); dpll_val |= DPLL_VCO_ENABLE; PSB_WVDC32(dpll_val, map->dpll); PSB_RVDC32(map->dpll); /* wait for DSI PLL to lock */ while (timeout < 20000 && !(PSB_RVDC32(map->conf) & PIPECONF_DSIPLL_LOCK)) { udelay(150); timeout++; } if (timeout == 20000) { DRM_ERROR("%s, can't lock DSIPLL.\n", __func__); return -EINVAL; } } } /* Restore mode */ PSB_WVDC32(pipe->htotal, map->htotal); PSB_WVDC32(pipe->hblank, map->hblank); PSB_WVDC32(pipe->hsync, map->hsync); PSB_WVDC32(pipe->vtotal, map->vtotal); PSB_WVDC32(pipe->vblank, map->vblank); PSB_WVDC32(pipe->vsync, map->vsync); PSB_WVDC32(pipe->src, map->src); PSB_WVDC32(pipe->status, map->status); /*set up the plane*/ PSB_WVDC32(pipe->stride, map->stride); PSB_WVDC32(pipe->linoff, map->linoff); PSB_WVDC32(pipe->tileoff, map->tileoff); PSB_WVDC32(pipe->size, map->size); PSB_WVDC32(pipe->pos, map->pos); PSB_WVDC32(pipe->surf, map->surf); if (pipenum == 1) { /* restore palette (gamma) */ /*DRM_UDELAY(50000); */ for (i = 0; i < 256; i++) PSB_WVDC32(pipe->palette[i], map->palette + (i << 2)); PSB_WVDC32(regs->savePFIT_CONTROL, PFIT_CONTROL); PSB_WVDC32(regs->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); /*TODO: resume HDMI port */ /*TODO: resume pipe*/ /*enable the plane*/ PSB_WVDC32(pipe->cntr & ~DISPLAY_PLANE_ENABLE, map->cntr); return 0; } /*set up pipe related registers*/ PSB_WVDC32(mipi_val, mipi_reg); /*setup MIPI adapter + MIPI IP registers*/ if (dsi_config) mdfld_dsi_controller_init(dsi_config, pipenum); if (in_atomic() || in_interrupt()) mdelay(20); else msleep(20); /*enable the plane*/ PSB_WVDC32(pipe->cntr, map->cntr); if (in_atomic() || in_interrupt()) mdelay(20); else msleep(20); /* LP Hold Release */ temp = REG_READ(mipi_reg); temp |= LP_OUTPUT_HOLD_RELEASE; REG_WRITE(mipi_reg, temp); mdelay(1); /* Set DSI host to exit from Utra Low Power State */ temp = REG_READ(device_ready_reg); temp &= ~ULPS_MASK; temp |= 0x3; temp |= EXIT_ULPS_DEV_READY; REG_WRITE(device_ready_reg, temp); mdelay(1); temp = REG_READ(device_ready_reg); temp &= ~ULPS_MASK; temp |= EXITING_ULPS; REG_WRITE(device_ready_reg, temp); mdelay(1); /*enable the pipe*/ PSB_WVDC32(pipe->conf, map->conf); /* restore palette (gamma) */ /*DRM_UDELAY(50000); */ for (i = 0; i < 256; i++) PSB_WVDC32(pipe->palette[i], map->palette + (i << 2)); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov62376.35%125.00%
Alan Cox19323.65%375.00%
Total816100.00%4100.00%


static int mdfld_save_registers(struct drm_device *dev) { /* mdfld_save_cursor_overlay_registers(dev); */ mdfld_save_display_registers(dev, 0); mdfld_save_display_registers(dev, 2); mdfld_disable_crtc(dev, 0); mdfld_disable_crtc(dev, 2); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov43100.00%1100.00%
Total43100.00%1100.00%


static int mdfld_restore_registers(struct drm_device *dev) { mdfld_restore_display_registers(dev, 2); mdfld_restore_display_registers(dev, 0); /* mdfld_restore_cursor_overlay_registers(dev); */ return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov29100.00%1100.00%
Total29100.00%1100.00%


static int mdfld_power_down(struct drm_device *dev) { /* FIXME */ return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov15100.00%1100.00%
Total15100.00%1100.00%


static int mdfld_power_up(struct drm_device *dev) { /* FIXME */ return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov15100.00%1100.00%
Total15100.00%1100.00%

/* Medfield */ static const struct psb_offset mdfld_regmap[3] = { { .fp0 = MRST_FPA0, .fp1 = MRST_FPA1, .cntr = DSPACNTR, .conf = PIPEACONF, .src = PIPEASRC, .dpll = MRST_DPLL_A, .htotal = HTOTAL_A, .hblank = HBLANK_A, .hsync = HSYNC_A, .vtotal = VTOTAL_A, .vblank = VBLANK_A, .vsync = VSYNC_A, .stride = DSPASTRIDE, .size = DSPASIZE, .pos = DSPAPOS, .surf = DSPASURF, .addr = MRST_DSPABASE, .status = PIPEASTAT, .linoff = DSPALINOFF, .tileoff = DSPATILEOFF, .palette = PALETTE_A, }, { .fp0 = MDFLD_DPLL_DIV0, .cntr = DSPBCNTR, .conf = PIPEBCONF, .src = PIPEBSRC, .dpll = MDFLD_DPLL_B, .htotal = HTOTAL_B, .hblank = HBLANK_B, .hsync = HSYNC_B, .vtotal = VTOTAL_B, .vblank = VBLANK_B, .vsync = VSYNC_B, .stride = DSPBSTRIDE, .size = DSPBSIZE, .pos = DSPBPOS, .surf = DSPBSURF, .addr = MRST_DSPBBASE, .status = PIPEBSTAT, .linoff = DSPBLINOFF, .tileoff = DSPBTILEOFF, .palette = PALETTE_B, }, { .fp0 = MRST_FPA0, /* This is what the old code did ?? */ .cntr = DSPCCNTR, .conf = PIPECCONF, .src = PIPECSRC, /* No DPLL_C */ .dpll = MRST_DPLL_A, .htotal = HTOTAL_C, .hblank = HBLANK_C, .hsync = HSYNC_C, .vtotal = VTOTAL_C, .vblank = VBLANK_C, .vsync = VSYNC_C, .stride = DSPCSTRIDE, .size = DSPBSIZE, .pos = DSPCPOS, .surf = DSPCSURF, .addr = MDFLD_DSPCBASE, .status = PIPECSTAT, .linoff = DSPCLINOFF, .tileoff = DSPCTILEOFF, .palette = PALETTE_C, }, };
static int mdfld_chip_setup(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; if (pci_enable_msi(dev->pdev)) dev_warn(dev->dev, "Enabling MSI failed!\n"); dev_priv->regmap = mdfld_regmap; return mid_chip_setup(dev); }

Contributors

PersonTokensPropCommitsCommitProp
Alan Cox50100.00%2100.00%
Total50100.00%2100.00%

const struct psb_ops mdfld_chip_ops = { .name = "mdfld", .accel_2d = 0, .pipes = 3, .crtcs = 3, .lvds_mask = (1 << 1), .hdmi_mask = (1 << 1), .cursor_needs_phys = 0, .sgx_offset = MRST_SGX_OFFSET, .chip_setup = mdfld_chip_setup, .crtc_helper = &mdfld_helper_funcs, .crtc_funcs = &psb_intel_crtc_funcs, .output_init = mdfld_output_init, #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE .backlight_init = mdfld_backlight_init, #endif .save_regs = mdfld_save_registers, .restore_regs = mdfld_restore_registers, .save_crtc = gma_crtc_save, .restore_crtc = gma_crtc_restore, .power_down = mdfld_power_down, .power_up = mdfld_power_up, };

Overall Contributors

PersonTokensPropCommitsCommitProp
Kirill A. Shutemov160067.51%218.18%
Alan Cox75331.77%654.55%
Daniel Vetter100.42%19.09%
Patrik Jakobsson70.30%218.18%
Total2370100.00%11100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.