cregit-Linux how code gets into the kernel

Release 4.11 drivers/gpu/drm/i915/i915_guc_reg.h

/*
 * Copyright © 2014 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 *
 */
#ifndef _I915_GUC_REG_H_

#define _I915_GUC_REG_H_

/* Definitions of GuC H/W registers, bits, etc */


#define GUC_STATUS			_MMIO(0xc000)

#define   GS_RESET_SHIFT		0

#define   GS_MIA_IN_RESET		  (0x01 << GS_RESET_SHIFT)

#define   GS_BOOTROM_SHIFT		1

#define   GS_BOOTROM_MASK		  (0x7F << GS_BOOTROM_SHIFT)

#define   GS_BOOTROM_RSA_FAILED		  (0x50 << GS_BOOTROM_SHIFT)

#define   GS_BOOTROM_JUMP_PASSED	  (0x76 << GS_BOOTROM_SHIFT)

#define   GS_UKERNEL_SHIFT		8

#define   GS_UKERNEL_MASK		  (0xFF << GS_UKERNEL_SHIFT)

#define   GS_UKERNEL_LAPIC_DONE		  (0x30 << GS_UKERNEL_SHIFT)

#define   GS_UKERNEL_DPC_ERROR		  (0x60 << GS_UKERNEL_SHIFT)

#define   GS_UKERNEL_READY		  (0xF0 << GS_UKERNEL_SHIFT)

#define   GS_MIA_SHIFT			16

#define   GS_MIA_MASK			  (0x07 << GS_MIA_SHIFT)

#define   GS_MIA_CORE_STATE		  (0x01 << GS_MIA_SHIFT)

#define   GS_MIA_HALT_REQUESTED		  (0x02 << GS_MIA_SHIFT)

#define   GS_MIA_ISR_ENTRY		  (0x04 << GS_MIA_SHIFT)

#define   GS_AUTH_STATUS_SHIFT		30

#define   GS_AUTH_STATUS_MASK		  (0x03 << GS_AUTH_STATUS_SHIFT)

#define   GS_AUTH_STATUS_BAD		  (0x01 << GS_AUTH_STATUS_SHIFT)

#define   GS_AUTH_STATUS_GOOD		  (0x02 << GS_AUTH_STATUS_SHIFT)


#define SOFT_SCRATCH(n)			_MMIO(0xc180 + (n) * 4)

#define SOFT_SCRATCH_COUNT		16


#define UOS_RSA_SCRATCH(i)		_MMIO(0xc200 + (i) * 4)

#define   UOS_RSA_SCRATCH_MAX_COUNT	  64

#define DMA_ADDR_0_LOW			_MMIO(0xc300)

#define DMA_ADDR_0_HIGH			_MMIO(0xc304)

#define DMA_ADDR_1_LOW			_MMIO(0xc308)

#define DMA_ADDR_1_HIGH			_MMIO(0xc30c)

#define   DMA_ADDRESS_SPACE_WOPCM	  (7 << 16)

#define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)

#define DMA_COPY_SIZE			_MMIO(0xc310)

#define DMA_CTRL			_MMIO(0xc314)

#define   HUC_UKERNEL			  (1<<9)

#define   UOS_MOVE			  (1<<4)

#define   START_DMA			  (1<<0)

#define DMA_GUC_WOPCM_OFFSET		_MMIO(0xc340)

#define   HUC_LOADING_AGENT_VCR		  (0<<1)

#define   HUC_LOADING_AGENT_GUC		  (1<<1)

#define   GUC_WOPCM_OFFSET_VALUE	  0x80000	
/* 512KB */

#define GUC_MAX_IDLE_COUNT		_MMIO(0xC3E4)


#define HUC_STATUS2             _MMIO(0xD3B0)

#define   HUC_FW_VERIFIED       (1<<7)

/* Defines WOPCM space available to GuC firmware */

#define GUC_WOPCM_SIZE			_MMIO(0xc050)
/* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */

#define   GUC_WOPCM_TOP			  (0x80 << 12)	
/* 512KB */

#define   BXT_GUC_WOPCM_RC6_RESERVED	  (0x10 << 12)	
/* 64KB  */

/* GuC addresses above GUC_GGTT_TOP also don't map through the GTT */

#define GUC_GGTT_TOP			0xFEE00000


#define GEN8_GT_PM_CONFIG		_MMIO(0x138140)

#define GEN9LP_GT_PM_CONFIG		_MMIO(0x138140)

#define GEN9_GT_PM_CONFIG		_MMIO(0x13816c)

#define   GT_DOORBELL_ENABLE		  (1<<0)


#define GEN8_GTCR			_MMIO(0x4274)

#define   GEN8_GTCR_INVALIDATE		  (1<<0)


#define GUC_ARAT_C6DIS			_MMIO(0xA178)


#define GUC_SHIM_CONTROL		_MMIO(0xc064)

#define   GUC_DISABLE_SRAM_INIT_TO_ZEROES	(1<<0)

#define   GUC_ENABLE_READ_CACHE_LOGIC		(1<<1)

#define   GUC_ENABLE_MIA_CACHING		(1<<2)

#define   GUC_GEN10_MSGCH_ENABLE		(1<<4)

#define   GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA	(1<<9)

#define   GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA	(1<<10)

#define   GUC_ENABLE_MIA_CLOCK_GATING		(1<<15)

#define   GUC_GEN10_SHIM_WC_ENABLE		(1<<21)


#define GUC_SHIM_CONTROL_VALUE	(GUC_DISABLE_SRAM_INIT_TO_ZEROES        | \
                                 GUC_ENABLE_READ_CACHE_LOGIC            | \
                                 GUC_ENABLE_MIA_CACHING                 | \
                                 GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA    | \
                                 GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA   | \
                                 GUC_ENABLE_MIA_CLOCK_GATING)


#define GUC_SEND_INTERRUPT		_MMIO(0xc4c8)

#define   GUC_SEND_TRIGGER		  (1<<0)


#define GEN8_DRBREGL(x)			_MMIO(0x1000 + (x) * 8)

#define   GEN8_DRB_VALID		  (1<<0)

#define GEN8_DRBREGU(x)			_MMIO(0x1000 + (x) * 8 + 4)


#define DE_GUCRMR			_MMIO(0x44054)


#define GUC_BCS_RCS_IER			_MMIO(0xC550)

#define GUC_VCS2_VCS1_IER		_MMIO(0xC554)

#define GUC_WD_VECS_IER			_MMIO(0xC558)

#define GUC_PM_P24C_IER			_MMIO(0xC55C)

#endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Dave Gordon22569.44%214.29%
Ville Syrjälä309.26%214.29%
Alex Dai309.26%428.57%
Anusha Srivatsa206.17%17.14%
Peter Antoine61.85%17.14%
Chris Wilson51.54%17.14%
Arun Siluvery30.93%17.14%
Sagar Arun Kamble30.93%17.14%
Arkadiusz Hiler20.62%17.14%
Total324100.00%14100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.