cregit-Linux how code gets into the kernel

Release 4.11 drivers/gpu/drm/sti/sti_hdmi.h

/*
 * Copyright (C) STMicroelectronics SA 2014
 * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
 * License terms:  GNU General Public License (GPL), version 2
 */

#ifndef _STI_HDMI_H_

#define _STI_HDMI_H_

#include <linux/hdmi.h>
#include <linux/platform_device.h>

#include <drm/drmP.h>


#define HDMI_STA           0x0010

#define HDMI_STA_DLL_LCK   BIT(5)

#define HDMI_STA_HOT_PLUG  BIT(4)

struct sti_hdmi;


struct hdmi_phy_ops {
	
bool (*start)(struct sti_hdmi *hdmi);
	
void (*stop)(struct sti_hdmi *hdmi);
};


struct hdmi_audio_params {
	
bool enabled;
	
unsigned int sample_width;
	
unsigned int sample_rate;
	
struct hdmi_audio_infoframe cea;
};


static const struct drm_prop_enum_list colorspace_mode_names[] = {
	{ HDMI_COLORSPACE_RGB, "rgb" },
	{ HDMI_COLORSPACE_YUV422, "yuv422" },
	{ HDMI_COLORSPACE_YUV444, "yuv444" },
};


#define DEFAULT_COLORSPACE_MODE HDMI_COLORSPACE_RGB

/**
 * STI hdmi structure
 *
 * @dev: driver device
 * @drm_dev: pointer to drm device
 * @mode: current display mode selected
 * @regs: hdmi register
 * @syscfg: syscfg register for pll rejection configuration
 * @clk_pix: hdmi pixel clock
 * @clk_tmds: hdmi tmds clock
 * @clk_phy: hdmi phy clock
 * @clk_audio: hdmi audio clock
 * @irq: hdmi interrupt number
 * @irq_status: interrupt status register
 * @phy_ops: phy start/stop operations
 * @enabled: true if hdmi is enabled else false
 * @hpd: hot plug detect status
 * @wait_event: wait event
 * @event_received: wait event status
 * @reset: reset control of the hdmi phy
 * @ddc_adapt: i2c ddc adapter
 * @colorspace: current colorspace selected
 * @hdmi_monitor: true if HDMI monitor detected else DVI monitor assumed
 * @audio_pdev: ASoC hdmi-codec platform device
 * @audio: hdmi audio parameters.
 * @drm_connector: hdmi connector
 */

struct sti_hdmi {
	
struct device dev;
	
struct drm_device *drm_dev;
	
struct drm_display_mode mode;
	
void __iomem *regs;
	
void __iomem *syscfg;
	
struct clk *clk_pix;
	
struct clk *clk_tmds;
	
struct clk *clk_phy;
	
struct clk *clk_audio;
	
int irq;
	
u32 irq_status;
	
struct hdmi_phy_ops *phy_ops;
	
bool enabled;
	
bool hpd;
	
wait_queue_head_t wait_event;
	
bool event_received;
	
struct reset_control *reset;
	
struct i2c_adapter *ddc_adapt;
	
enum hdmi_colorspace colorspace;
	
bool hdmi_monitor;
	
struct platform_device *audio_pdev;
	
struct hdmi_audio_params audio;
	
struct drm_connector *drm_connector;
};

u32 hdmi_read(struct sti_hdmi *hdmi, int offset);
void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset);

/**
 * hdmi phy config structure
 *
 * A pointer to an array of these structures is passed to a TMDS (HDMI) output
 * via the control interface to provide board and SoC specific
 * configurations of the HDMI PHY. Each entry in the array specifies a hardware
 * specific configuration for a given TMDS clock frequency range.
 *
 * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to
 * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to
 * @config: SoC specific register configuration
 */

struct hdmi_phy_config {
	
u32 min_tmds_freq;
	
u32 max_tmds_freq;
	
u32 config[4];
};

#endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Benjamin Gaignard18470.50%337.50%
Vincent Abriou4316.48%450.00%
Arnaud Pouliquen3413.03%112.50%
Total261100.00%8100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.