cregit-Linux how code gets into the kernel

Release 4.11 drivers/hwmon/w83l785ts.c

Directory: drivers/hwmon
/*
 * w83l785ts.c - Part of lm_sensors, Linux kernel modules for hardware
 *               monitoring
 * Copyright (C) 2003-2009  Jean Delvare <jdelvare@suse.de>
 *
 * Inspired from the lm83 driver. The W83L785TS-S is a sensor chip made
 * by Winbond. It reports a single external temperature with a 1 deg
 * resolution and a 3 deg accuracy. Datasheet can be obtained from
 * Winbond's website at:
 *   http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
 *
 * Ported to Linux 2.6 by Wolfgang Ziegler <nuppla@gmx.at> and Jean Delvare
 * <jdelvare@suse.de>.
 *
 * Thanks to James Bolt <james@evilpenguin.com> for benchmarking the read
 * error handling mechanism.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>

/* How many retries on register read error */

#define MAX_RETRIES	5

/*
 * Address to scan
 * Address is fully defined internally and cannot be changed.
 */


static const unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };

/*
 * The W83L785TS-S registers
 * Manufacturer ID is 0x5CA3 for Winbond.
 */


#define W83L785TS_REG_MAN_ID1		0x4D

#define W83L785TS_REG_MAN_ID2		0x4C

#define W83L785TS_REG_CHIP_ID		0x4E

#define W83L785TS_REG_CONFIG		0x40

#define W83L785TS_REG_TYPE		0x52

#define W83L785TS_REG_TEMP		0x27

#define W83L785TS_REG_TEMP_OVER		0x53 
/* not sure about this one */

/*
 * Conversions
 * The W83L785TS-S uses signed 8-bit values.
 */


#define TEMP_FROM_REG(val)	((val) * 1000)

/*
 * Functions declaration
 */

static int w83l785ts_probe(struct i2c_client *client,
			   const struct i2c_device_id *id);
static int w83l785ts_detect(struct i2c_client *client,
			    struct i2c_board_info *info);
static int w83l785ts_remove(struct i2c_client *client);
static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval);
static struct w83l785ts_data *w83l785ts_update_device(struct device *dev);

/*
 * Driver data (common to all clients)
 */


static const struct i2c_device_id w83l785ts_id[] = {
	{ "w83l785ts", 0 },
	{ }
};
MODULE_DEVICE_TABLE(i2c, w83l785ts_id);


static struct i2c_driver w83l785ts_driver = {
	.class		= I2C_CLASS_HWMON,
	.driver = {
		.name	= "w83l785ts",
        },
	.probe		= w83l785ts_probe,
	.remove		= w83l785ts_remove,
	.id_table	= w83l785ts_id,
	.detect		= w83l785ts_detect,
	.address_list	= normal_i2c,
};

/*
 * Client data (each client gets its own)
 */


struct w83l785ts_data {
	
struct device *hwmon_dev;
	
struct mutex update_lock;
	
char valid; /* zero until following fields are valid */
	
unsigned long last_updated; /* in jiffies */

	/* registers values */
	
s8 temp[2]; /* 0: input, 1: critical limit */
};

/*
 * Sysfs stuff
 */


static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct w83l785ts_data *data = w83l785ts_update_device(dev); return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); }

Contributors

PersonTokensPropCommitsCommitProp
Jean Delvare5490.00%250.00%
Yani Ioannou46.67%125.00%
Mark M. Hoffman23.33%125.00%
Total60100.00%4100.00%

static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp, NULL, 1); /* * Real code */ /* Return 0 if detection is successful, -ENODEV otherwise */
static int w83l785ts_detect(struct i2c_client *client, struct i2c_board_info *info) { struct i2c_adapter *adapter = client->adapter; u16 man_id; u8 chip_id; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; /* detection */ if ((w83l785ts_read_value(client, W83L785TS_REG_CONFIG, 0) & 0x80) || (w83l785ts_read_value(client, W83L785TS_REG_TYPE, 0) & 0xFC)) { dev_dbg(&adapter->dev, "W83L785TS-S detection failed at 0x%02x\n", client->addr); return -ENODEV; } /* Identification */ man_id = (w83l785ts_read_value(client, W83L785TS_REG_MAN_ID1, 0) << 8) + w83l785ts_read_value(client, W83L785TS_REG_MAN_ID2, 0); chip_id = w83l785ts_read_value(client, W83L785TS_REG_CHIP_ID, 0); if (man_id != 0x5CA3 /* Winbond */ || chip_id != 0x70) { /* W83L785TS-S */ dev_dbg(&adapter->dev, "Unsupported chip (man_id=0x%04X, chip_id=0x%02X)\n", man_id, chip_id); return -ENODEV; } strlcpy(info->type, "w83l785ts", I2C_NAME_SIZE); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Jean Delvare17599.43%583.33%
Greg Kroah-Hartman10.57%116.67%
Total176100.00%6100.00%


static int w83l785ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct w83l785ts_data *data; struct device *dev = &client->dev; int err; data = devm_kzalloc(dev, sizeof(struct w83l785ts_data), GFP_KERNEL); if (!data) return -ENOMEM; i2c_set_clientdata(client, data); mutex_init(&data->update_lock); /* * Initialize the W83L785TS chip * Nothing yet, assume it is already started. */ err = device_create_file(dev, &sensor_dev_attr_temp1_input.dev_attr); if (err) return err; err = device_create_file(dev, &sensor_dev_attr_temp1_max.dev_attr); if (err) goto exit_remove; /* Register sysfs hooks */ data->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto exit_remove; } return 0; exit_remove: device_remove_file(dev, &sensor_dev_attr_temp1_input.dev_attr); device_remove_file(dev, &sensor_dev_attr_temp1_max.dev_attr); return err; }

Contributors

PersonTokensPropCommitsCommitProp
Jean Delvare7945.40%333.33%
Rudolf Marek4324.71%111.11%
Mark M. Hoffman2816.09%111.11%
Guenter Roeck2011.49%222.22%
Tony Jones31.72%111.11%
Ingo Molnar10.57%111.11%
Total174100.00%9100.00%


static int w83l785ts_remove(struct i2c_client *client) { struct w83l785ts_data *data = i2c_get_clientdata(client); hwmon_device_unregister(data->hwmon_dev); device_remove_file(&client->dev, &sensor_dev_attr_temp1_input.dev_attr); device_remove_file(&client->dev, &sensor_dev_attr_temp1_max.dev_attr); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Rudolf Marek2645.61%120.00%
Mark M. Hoffman1628.07%120.00%
Jean Delvare1424.56%240.00%
Tony Jones11.75%120.00%
Total57100.00%5100.00%


static u8 w83l785ts_read_value(struct i2c_client *client, u8 reg, u8 defval) { int value, i; struct device *dev; const char *prefix; /* * We might be called during detection, at which point the client * isn't yet fully initialized, so we can't use dev_dbg on it */ if (i2c_get_clientdata(client)) { dev = &client->dev; prefix = ""; } else { dev = &client->adapter->dev; prefix = "w83l785ts: "; } /* * Frequent read errors have been reported on Asus boards, so we * retry on read errors. If it still fails (unlikely), return the * default value requested by the caller. */ for (i = 1; i <= MAX_RETRIES; i++) { value = i2c_smbus_read_byte_data(client, reg); if (value >= 0) { dev_dbg(dev, "%sRead 0x%02x from register 0x%02x.\n", prefix, value, reg); return value; } dev_dbg(dev, "%sRead failed, will retry in %d.\n", prefix, i); msleep(i); } dev_err(dev, "%sCouldn't read value from register 0x%02x.\n", prefix, reg); return defval; }

Contributors

PersonTokensPropCommitsCommitProp
Jean Delvare14597.97%360.00%
Guenter Roeck21.35%120.00%
Greg Kroah-Hartman10.68%120.00%
Total148100.00%5100.00%


static struct w83l785ts_data *w83l785ts_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct w83l785ts_data *data = i2c_get_clientdata(client); mutex_lock(&data->update_lock); if (!data->valid || time_after(jiffies, data->last_updated + HZ * 2)) { dev_dbg(&client->dev, "Updating w83l785ts data.\n"); data->temp[0] = w83l785ts_read_value(client, W83L785TS_REG_TEMP, data->temp[0]); data->temp[1] = w83l785ts_read_value(client, W83L785TS_REG_TEMP_OVER, data->temp[1]); data->last_updated = jiffies; data->valid = 1; } mutex_unlock(&data->update_lock); return data; }

Contributors

PersonTokensPropCommitsCommitProp
Jean Delvare11281.16%350.00%
Mark M. Hoffman1913.77%116.67%
Alexey Dobriyan53.62%116.67%
Ingo Molnar21.45%116.67%
Total138100.00%6100.00%

module_i2c_driver(w83l785ts_driver); MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); MODULE_DESCRIPTION("W83L785TS-S driver"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Jean Delvare85079.74%1142.31%
Mark M. Hoffman797.41%311.54%
Rudolf Marek696.47%13.85%
Guenter Roeck232.16%311.54%
Greg Kroah-Hartman141.31%27.69%
Alexey Dobriyan80.75%13.85%
Ingo Molnar70.66%13.85%
Tony Jones60.56%13.85%
Laurent Riffard50.47%13.85%
Yani Ioannou40.38%13.85%
Axel Lin10.09%13.85%
Total1066100.00%26100.00%
Directory: drivers/hwmon
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.