cregit-Linux how code gets into the kernel

Release 4.11 drivers/i2c/busses/i2c-amd756.c

/*
    Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>

    Shamelessly ripped from i2c-piix4.c:

    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
    Philip Edelbrock <phil@netroedge.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
*/

/*
    2002-04-08: Added nForce support. (Csaba Halasz)
    2002-10-03: Fixed nForce PnP I/O port. (Michael Steil)
    2002-12-28: Rewritten into something that resembles a Linux driver (hch)
    2003-11-29: Added back AMD8111 removed by the previous rewrite.
                (Philip Pokorny)
*/

/*
   Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce
   Note: we assume there can only be one device, with one SMBus interface.
*/

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/stddef.h>
#include <linux/ioport.h>
#include <linux/i2c.h>
#include <linux/acpi.h>
#include <linux/io.h>

/* AMD756 SMBus address offsets */

#define SMB_ADDR_OFFSET		0xE0

#define SMB_IOSIZE		16

#define SMB_GLOBAL_STATUS	(0x0 + amd756_ioport)

#define SMB_GLOBAL_ENABLE	(0x2 + amd756_ioport)

#define SMB_HOST_ADDRESS	(0x4 + amd756_ioport)

#define SMB_HOST_DATA		(0x6 + amd756_ioport)

#define SMB_HOST_COMMAND	(0x8 + amd756_ioport)

#define SMB_HOST_BLOCK_DATA	(0x9 + amd756_ioport)

#define SMB_HAS_DATA		(0xA + amd756_ioport)

#define SMB_HAS_DEVICE_ADDRESS	(0xC + amd756_ioport)

#define SMB_HAS_HOST_ADDRESS	(0xE + amd756_ioport)

#define SMB_SNOOP_ADDRESS	(0xF + amd756_ioport)

/* PCI Address Constants */

/* address of I/O space */

#define SMBBA		0x058		
/* mh */

#define SMBBANFORCE	0x014

/* general configuration */

#define SMBGCFG		0x041		
/* mh */

/* silicon revision code */

#define SMBREV		0x008

/* Other settings */

#define MAX_TIMEOUT	500

/* AMD756 constants */

#define AMD756_QUICK		0x00

#define AMD756_BYTE		0x01

#define AMD756_BYTE_DATA	0x02

#define AMD756_WORD_DATA	0x03

#define AMD756_PROCESS_CALL	0x04

#define AMD756_BLOCK_DATA	0x05


static struct pci_driver amd756_driver;

static unsigned short amd756_ioport;

/* 
  SMBUS event = I/O 28-29 bit 11
     see E0 for the status bits and enabled in E2
     
*/

#define GS_ABRT_STS	(1 << 0)

#define GS_COL_STS	(1 << 1)

#define GS_PRERR_STS	(1 << 2)

#define GS_HST_STS	(1 << 3)

#define GS_HCYC_STS	(1 << 4)

#define GS_TO_STS	(1 << 5)

#define GS_SMB_STS	(1 << 11)


#define GS_CLEAR_STS	(GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
                         GS_HCYC_STS | GS_TO_STS )


#define GE_CYC_TYPE_MASK	(7)

#define GE_HOST_STC		(1 << 3)

#define GE_ABORT		(1 << 5)



static int amd756_transaction(struct i2c_adapter *adap) { int temp; int result = 0; int timeout = 0; dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, " "DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA)); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) { dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp); do { msleep(1); temp = inw_p(SMB_GLOBAL_STATUS); } while ((temp & (GS_HST_STS | GS_SMB_STS)) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp); goto abort; } timeout = 0; } /* start the transaction by setting the start bit */ outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE); /* We will always wait for a fraction of a second! */ do { msleep(1); temp = inw_p(SMB_GLOBAL_STATUS); } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Completion timeout!\n"); goto abort; } if (temp & GS_PRERR_STS) { result = -ENXIO; dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n"); } if (temp & GS_COL_STS) { result = -EIO; dev_warn(&adap->dev, "SMBus collision!\n"); } if (temp & GS_TO_STS) { result = -ETIMEDOUT; dev_dbg(&adap->dev, "SMBus protocol timeout!\n"); } if (temp & GS_HCYC_STS) dev_dbg(&adap->dev, "SMBus protocol success!\n"); outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS); #ifdef DEBUG if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) { dev_dbg(&adap->dev, "Failed reset at end of transaction (%04x)\n", temp); } #endif dev_dbg(&adap->dev, "Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA)); return result; abort: dev_warn(&adap->dev, "Sending abort\n"); outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE); msleep(100); outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS); return -EIO; }

Contributors

PersonTokensPropCommitsCommitProp
Pavel Machek28768.66%114.29%
Greg Kroah-Hartman7818.66%228.57%
Christoph Hellwig368.61%114.29%
Jean Delvare112.63%114.29%
David Brownell40.96%114.29%
Roel Kluin20.48%114.29%
Total418100.00%7100.00%

/* Return negative errno on error. */
static s32 amd756_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { int i, len; int status; switch (size) { case I2C_SMBUS_QUICK: outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMB_HOST_ADDRESS); size = AMD756_QUICK; break; case I2C_SMBUS_BYTE: outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMB_HOST_ADDRESS); if (read_write == I2C_SMBUS_WRITE) outb_p(command, SMB_HOST_DATA); size = AMD756_BYTE; break; case I2C_SMBUS_BYTE_DATA: outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMB_HOST_ADDRESS); outb_p(command, SMB_HOST_COMMAND); if (read_write == I2C_SMBUS_WRITE) outw_p(data->byte, SMB_HOST_DATA); size = AMD756_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMB_HOST_ADDRESS); outb_p(command, SMB_HOST_COMMAND); if (read_write == I2C_SMBUS_WRITE) outw_p(data->word, SMB_HOST_DATA); /* TODO: endian???? */ size = AMD756_WORD_DATA; break; case I2C_SMBUS_BLOCK_DATA: outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMB_HOST_ADDRESS); outb_p(command, SMB_HOST_COMMAND); if (read_write == I2C_SMBUS_WRITE) { len = data->block[0]; if (len < 0) len = 0; if (len > 32) len = 32; outw_p(len, SMB_HOST_DATA); /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */ for (i = 1; i <= len; i++) outb_p(data->block[i], SMB_HOST_BLOCK_DATA); } size = AMD756_BLOCK_DATA; break; default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); return -EOPNOTSUPP; } /* How about enabling interrupts... */ outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE); status = amd756_transaction(adap); if (status) return status; if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK)) return 0; switch (size) { case AMD756_BYTE: data->byte = inw_p(SMB_HOST_DATA); break; case AMD756_BYTE_DATA: data->byte = inw_p(SMB_HOST_DATA); break; case AMD756_WORD_DATA: data->word = inw_p(SMB_HOST_DATA); /* TODO: endian???? */ break; case AMD756_BLOCK_DATA: data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f; if(data->block[0] > 32) data->block[0] = 32; /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMB_HOST_BLOCK_DATA); break; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Pavel Machek47093.63%116.67%
Jean Delvare173.39%116.67%
David Brownell101.99%116.67%
Greg Kroah-Hartman30.60%116.67%
Christoph Hellwig10.20%116.67%
Mark D. Studebaker10.20%116.67%
Total502100.00%6100.00%


static u32 amd756_func(struct i2c_adapter *adapter) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; }

Contributors

PersonTokensPropCommitsCommitProp
Pavel Machek2195.45%150.00%
Christoph Hellwig14.55%150.00%
Total22100.00%2100.00%

static const struct i2c_algorithm smbus_algorithm = { .smbus_xfer = amd756_access, .functionality = amd756_func, }; struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 }; static const char* chipname[] = { "AMD756", "AMD766", "AMD768", "nVidia nForce", "AMD8111", }; static const struct pci_device_id amd756_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B), .driver_data = AMD756 }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413), .driver_data = AMD766 }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443), .driver_data = AMD768 }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), .driver_data = AMD8111 }, { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS), .driver_data = NFORCE }, { 0, } }; MODULE_DEVICE_TABLE (pci, amd756_ids);
static int amd756_probe(struct pci_dev *pdev, const struct pci_device_id *id) { int nforce = (id->driver_data == NFORCE); int error; u8 temp; if (amd756_ioport) { dev_err(&pdev->dev, "Only one device supported " "(you have a strange motherboard, btw)\n"); return -ENODEV; } if (nforce) { if (PCI_FUNC(pdev->devfn) != 1) return -ENODEV; pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport); amd756_ioport &= 0xfffc; } else { /* amd */ if (PCI_FUNC(pdev->devfn) != 3) return -ENODEV; pci_read_config_byte(pdev, SMBGCFG, &temp); if ((temp & 128) == 0) { dev_err(&pdev->dev, "Error: SMBus controller I/O not enabled!\n"); return -ENODEV; } /* Determine the address of the SMBus areas */ /* Technically it is a dword but... */ pci_read_config_word(pdev, SMBBA, &amd756_ioport); amd756_ioport &= 0xff00; amd756_ioport += SMB_ADDR_OFFSET; } error = acpi_check_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name); if (error) return -ENODEV; if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) { dev_err(&pdev->dev, "SMB region 0x%x already in use!\n", amd756_ioport); return -ENODEV; } pci_read_config_byte(pdev, SMBREV, &temp); dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport); /* set up the sysfs linkage to our parent device */ amd756_smbus.dev.parent = &pdev->dev; snprintf(amd756_smbus.name, sizeof(amd756_smbus.name), "SMBus %s adapter at %04x", chipname[id->driver_data], amd756_ioport); error = i2c_add_adapter(&amd756_smbus); if (error) goto out_err; return 0; out_err: release_region(amd756_ioport, SMB_IOSIZE); return error; }

Contributors

PersonTokensPropCommitsCommitProp
Christoph Hellwig16652.04%17.14%
Pavel Machek5316.61%17.14%
Jean Delvare5015.67%857.14%
Greg Kroah-Hartman4915.36%321.43%
Robert P. J. Day10.31%17.14%
Total319100.00%14100.00%


static void amd756_remove(struct pci_dev *dev) { i2c_del_adapter(&amd756_smbus); release_region(amd756_ioport, SMB_IOSIZE); }

Contributors

PersonTokensPropCommitsCommitProp
Christoph Hellwig1770.83%133.33%
Pavel Machek625.00%133.33%
Jean Delvare14.17%133.33%
Total24100.00%3100.00%

static struct pci_driver amd756_driver = { .name = "amd756_smbus", .id_table = amd756_ids, .probe = amd756_probe, .remove = amd756_remove, }; module_pci_driver(amd756_driver); MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>"); MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver"); MODULE_LICENSE("GPL"); EXPORT_SYMBOL(amd756_smbus);

Overall Contributors

PersonTokensPropCommitsCommitProp
Pavel Machek96657.19%13.12%
Christoph Hellwig38022.50%26.25%
Jean Delvare1679.89%1340.62%
Greg Kroah-Hartman1368.05%515.62%
David Brownell150.89%13.12%
Matthieu Castet70.41%13.12%
Jingoo Han60.36%13.12%
Gerd Knorr40.24%13.12%
Roel Kluin20.12%13.12%
Deepak Saxena10.06%13.12%
Wolfram Sang10.06%13.12%
H Hartley Sweeten10.06%13.12%
Robert P. J. Day10.06%13.12%
Mark D. Studebaker10.06%13.12%
Axel Lin10.06%13.12%
Total1689100.00%32100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.