cregit-Linux how code gets into the kernel

Release 4.11 drivers/ide/cy82c693.c

Directory: drivers/ide
/*
 *  Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
 *  Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
 *  Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
 *
 * CYPRESS CY82C693 chipset IDE controller
 *
 * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/init.h>

#include <asm/io.h>


#define DRV_NAME "cy82c693"

/*
 *      NOTE: the value for busmaster timeout is tricky and I got it by
 *      trial and error!  By using a to low value will cause DMA timeouts
 *      and drop IDE performance, and by using a to high value will cause
 *      audio playback to scatter.
 *      If you know a better value or how to calc it, please let me know.
 */

/* twice the value written in cy82c693ub datasheet */

#define BUSMASTER_TIMEOUT	0x50
/*
 * the value above was tested on my machine and it seems to work okay
 */

/* here are the offset definitions for the registers */

#define CY82_IDE_CMDREG		0x04

#define CY82_IDE_ADDRSETUP	0x48

#define CY82_IDE_MASTER_IOR	0x4C

#define CY82_IDE_MASTER_IOW	0x4D

#define CY82_IDE_SLAVE_IOR	0x4E

#define CY82_IDE_SLAVE_IOW	0x4F

#define CY82_IDE_MASTER_8BIT	0x50

#define CY82_IDE_SLAVE_8BIT	0x51


#define CY82_INDEX_PORT		0x22

#define CY82_DATA_PORT		0x23


#define CY82_INDEX_CHANNEL0	0x30

#define CY82_INDEX_CHANNEL1	0x31

#define CY82_INDEX_TIMEOUT	0x32

/*
 * set DMA mode a specific channel for CY82C693
 */


static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { const u8 mode = drive->dma_mode; u8 single = (mode & 0x10) >> 4, index = 0, data = 0; index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; data = (mode & 3) | (single << 2); outb(index, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); /* * note: below we set the value for Bus Master IDE TimeOut Register * I'm not absolutely sure what this does, but it solved my problem * with IDE DMA and sound, so I now can play sound and work with * my IDE driver at the same time :-) * * If you know the correct (best) value for this register please * let me know - ASK */ data = BUSMASTER_TIMEOUT; outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT); outb(data, CY82_DATA_PORT); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe6162.24%233.33%
Bartlomiej Zolnierkiewicz3636.73%350.00%
Lucas De Marchi11.02%116.67%
Total98100.00%6100.00%


static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { struct pci_dev *dev = to_pci_dev(hwif->dev); int bus_speed = ide_pci_clk ? ide_pci_clk : 33; const unsigned long T = 1000000 / bus_speed; unsigned int addrCtrl; struct ide_timing t; u8 time_16, time_8; /* select primary or secondary channel */ if (drive->dn > 1) { /* drive is on the secondary channel */ dev = pci_get_slot(dev->bus, dev->devfn+1); if (!dev) { printk(KERN_ERR "%s: tune_drive: " "Cannot find secondary interface!\n", drive->name); return; } } ide_timing_compute(drive, drive->pio_mode, &t, T, 1); time_16 = clamp_val(t.recover - 1, 0, 15) | (clamp_val(t.active - 1, 0, 15) << 4); time_8 = clamp_val(t.act8b - 1, 0, 15) | (clamp_val(t.rec8b - 1, 0, 15) << 4); /* now let's write the clocks registers */ if ((drive->dn & 1) == 0) { /* * set master drive * address setup control register * is 32 bit !!! */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF); addrCtrl |= clamp_val(t.setup - 1, 0, 15); pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); /* now let's set the remaining registers */ pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16); pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16); pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8); } else { /* * set slave drive * address setup control register * is 32 bit !!! */ pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); addrCtrl &= (~0xF0); addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4); pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); /* now let's set the remaining registers */ pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16); pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); } if (drive->dn > 1) pci_dev_put(dev); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe20055.87%220.00%
Bartlomiej Zolnierkiewicz14741.06%660.00%
Julia Lawall102.79%110.00%
Alan Cox10.28%110.00%
Total358100.00%10100.00%


static void init_iops_cy82c693(ide_hwif_t *hwif) { static ide_hwif_t *primary; struct pci_dev *dev = to_pci_dev(hwif->dev); if (PCI_FUNC(dev->devfn) == 1) primary = hwif; else { hwif->mate = primary; hwif->channel = 1; } }

Contributors

PersonTokensPropCommitsCommitProp
Ivan Kokshaysky2747.37%120.00%
Bartlomiej Zolnierkiewicz1831.58%240.00%
Jens Axboe1119.30%120.00%
Adrian Bunk11.75%120.00%
Total57100.00%5100.00%

static const struct ide_port_ops cy82c693_port_ops = { .set_pio_mode = cy82c693_set_pio_mode, .set_dma_mode = cy82c693_set_dma_mode, }; static const struct ide_port_info cy82c693_chipset = { .name = DRV_NAME, .init_iops = init_iops_cy82c693, .port_ops = &cy82c693_port_ops, .host_flags = IDE_HFLAG_SINGLE, .pio_mask = ATA_PIO4, .swdma_mask = ATA_SWDMA2, .mwdma_mask = ATA_MWDMA2, };
static int cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id) { struct pci_dev *dev2; int ret = -ENODEV; /* CY82C693 is more than only a IDE controller. Function 1 is primary IDE channel, function 2 - secondary. */ if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE && PCI_FUNC(dev->devfn) == 1) { dev2 = pci_get_slot(dev->bus, dev->devfn + 1); ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL); if (ret) pci_dev_put(dev2); } return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe3638.71%333.33%
Ivan Kokshaysky3335.48%111.11%
Bartlomiej Zolnierkiewicz2324.73%444.44%
Alan Cox11.08%111.11%
Total93100.00%9100.00%


static void cy82c693_remove(struct pci_dev *dev) { struct ide_host *host = pci_get_drvdata(dev); struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL; ide_pci_remove(dev); pci_dev_put(dev2); }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz55100.00%1100.00%
Total55100.00%1100.00%

static const struct pci_device_id cy82c693_pci_tbl[] = { { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl); static struct pci_driver cy82c693_pci_driver = { .name = "Cypress_IDE", .id_table = cy82c693_pci_tbl, .probe = cy82c693_init_one, .remove = cy82c693_remove, .suspend = ide_pci_suspend, .resume = ide_pci_resume, };
static int __init cy82c693_ide_init(void) { return ide_pci_register_driver(&cy82c693_pci_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe1487.50%250.00%
Bartlomiej Zolnierkiewicz212.50%250.00%
Total16100.00%4100.00%


static void __exit cy82c693_ide_exit(void) { pci_unregister_driver(&cy82c693_pci_driver); }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz15100.00%2100.00%
Total15100.00%2100.00%

module_init(cy82c693_ide_init); module_exit(cy82c693_ide_exit); MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz"); MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe39242.11%410.53%
Bartlomiej Zolnierkiewicz38140.92%2668.42%
Tejun Heo778.27%12.63%
Ivan Kokshaysky606.44%12.63%
Julia Lawall101.07%12.63%
Luca Tettamanti60.64%12.63%
Alan Cox20.21%12.63%
Adrian Bunk10.11%12.63%
Deepak Saxena10.11%12.63%
Lucas De Marchi10.11%12.63%
Greg Kroah-Hartman0.00%00.00%
Total931100.00%38100.00%
Directory: drivers/ide
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.