cregit-Linux how code gets into the kernel

Release 4.11 drivers/ide/gayle.c

Directory: drivers/ide
/*
 *  Amiga Gayle IDE Driver
 *
 *     Created 9 Jul 1997 by Geert Uytterhoeven
 *
 *  This file is subject to the terms and conditions of the GNU General Public
 *  License.  See the file COPYING in the main directory of this archive for
 *  more details.
 */

#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/zorro.h>
#include <linux/module.h>
#include <linux/platform_device.h>

#include <asm/setup.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/amigayle.h>


    /*
     *  Offsets from one of the above bases
     */


#define GAYLE_CONTROL	0x101a

    /*
     *  These are at different offsets from the base
     */


#define GAYLE_IRQ_4000	0xdd3020	
/* MSB = 1, Harddisk is source of */

#define GAYLE_IRQ_1200	0xda9000	
/* interrupt */


    /*
     *  Offset of the secondary port for IDE doublers
     *  Note that GAYLE_CONTROL is NOT available then!
     */


#define GAYLE_NEXT_PORT	0x1000


#define GAYLE_NUM_HWIFS		2

#define GAYLE_NUM_PROBE_HWIFS	(ide_doubler ? GAYLE_NUM_HWIFS : \
                                               GAYLE_NUM_HWIFS-1)

#define GAYLE_HAS_CONTROL_REG	(!ide_doubler)


static bool ide_doubler;
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");

    /*
     *  Check and acknowledge the interrupt status
     */


static int gayle_test_irq(ide_hwif_t *hwif) { unsigned char ch; ch = z_readb(hwif->io_ports.irq_addr); if (!(ch & GAYLE_IRQ_IDE)) return 0; return 1; }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe3792.50%133.33%
Bartlomiej Zolnierkiewicz25.00%133.33%
Sergei Shtylyov12.50%133.33%
Total40100.00%3100.00%


static void gayle_a1200_clear_irq(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; (void)z_readb(hwif->io_ports.status_addr); z_writeb(0x7c, hwif->io_ports.irq_addr); }

Contributors

PersonTokensPropCommitsCommitProp
Jens Axboe2765.85%133.33%
Sergei Shtylyov1024.39%133.33%
Bartlomiej Zolnierkiewicz49.76%133.33%
Total41100.00%3100.00%


static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base, unsigned long ctl, unsigned long irq_port) { int i; memset(hw, 0, sizeof(*hw)); hw->io_ports.data_addr = base; for (i = 1; i < 8; i++) hw->io_ports_array[i] = base + 2 + i * 4; hw->io_ports.ctl_addr = ctl; hw->io_ports.irq_addr = irq_port; hw->irq = IRQ_AMIGA_PORTS; }

Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz98100.00%3100.00%
Total98100.00%3100.00%

static const struct ide_port_ops gayle_a4000_port_ops = { .test_irq = gayle_test_irq, }; static const struct ide_port_ops gayle_a1200_port_ops = { .clear_irq = gayle_a1200_clear_irq, .test_irq = gayle_test_irq, }; static const struct ide_port_info gayle_port_info = { .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE | IDE_HFLAG_NO_DMA, .irq_flags = IRQF_SHARED, .chipset = ide_generic, }; /* * Probe for a Gayle IDE interface (and optionally for an IDE doubler) */
static int __init amiga_gayle_ide_probe(struct platform_device *pdev) { struct resource *res; struct gayle_ide_platform_data *pdata; unsigned long base, ctrlport, irqport; unsigned int i; int error; struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS]; struct ide_port_info d = gayle_port_info; struct ide_host *host; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -ENODEV; if (!request_mem_region(res->start, resource_size(res), "IDE")) return -EBUSY; pdata = dev_get_platdata(&pdev->dev); pr_info("ide: Gayle IDE controller (A%u style%s)\n", pdata->explicit_ack ? 1200 : 4000, ide_doubler ? ", IDE doubler" : ""); base = (unsigned long)ZTWO_VADDR(pdata->base); ctrlport = 0; irqport = (unsigned long)ZTWO_VADDR(pdata->irqport); if (pdata->explicit_ack) d.port_ops = &gayle_a1200_port_ops; else d.port_ops = &gayle_a4000_port_ops; for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) { if (GAYLE_HAS_CONTROL_REG) ctrlport = base + GAYLE_CONTROL; gayle_setup_ports(&hw[i], base, ctrlport, irqport); hws[i] = &hw[i]; } error = ide_host_add(&d, hws, i, &host); if (error) goto out; platform_set_drvdata(pdev, host); return 0; out: release_mem_region(res->start, resource_size(res)); return error; }

Contributors

PersonTokensPropCommitsCommitProp
Geert Uytterhoeven12142.31%15.00%
Bartlomiej Zolnierkiewicz8630.07%1470.00%
Jens Axboe5619.58%15.00%
Sergei Shtylyov124.20%15.00%
Alan Cox41.40%15.00%
Jingoo Han41.40%15.00%
Andrew Morton31.05%15.00%
Total286100.00%20100.00%


static int __exit amiga_gayle_ide_remove(struct platform_device *pdev) { struct ide_host *host = platform_get_drvdata(pdev); struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ide_host_remove(host); release_mem_region(res->start, resource_size(res)); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Geert Uytterhoeven5089.29%150.00%
Bartlomiej Zolnierkiewicz610.71%150.00%
Total56100.00%2100.00%

static struct platform_driver amiga_gayle_ide_driver = { .remove = __exit_p(amiga_gayle_ide_remove), .driver = { .name = "amiga-gayle-ide", }, }; module_platform_driver_probe(amiga_gayle_ide_driver, amiga_gayle_ide_probe); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:amiga-gayle-ide");

Overall Contributors

PersonTokensPropCommitsCommitProp
Bartlomiej Zolnierkiewicz24433.98%2165.62%
Geert Uytterhoeven20929.11%13.12%
Jens Axboe19026.46%13.12%
Sergei Shtylyov547.52%26.25%
Adrian Bunk81.11%26.25%
Jingoo Han50.70%26.25%
Alan Cox40.56%13.12%
Andrew Morton30.42%13.12%
Rusty Russell10.14%13.12%
Total718100.00%32100.00%
Directory: drivers/ide
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.