cregit-Linux how code gets into the kernel

Release 4.11 drivers/iio/pressure/zpa2326.h

Directory: drivers/iio/pressure
/*
 * Murata ZPA2326 pressure and temperature sensor IIO driver
 *
 * Copyright (c) 2016 Parrot S.A.
 *
 * Author: Gregor Boirie <gregor.boirie@parrot.com>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 */

#ifndef _ZPA2326_H

#define _ZPA2326_H

/* Register map. */

#define ZPA2326_REF_P_XL_REG              (0x8)

#define ZPA2326_REF_P_L_REG               (0x9)

#define ZPA2326_REF_P_H_REG               (0xa)

#define ZPA2326_DEVICE_ID_REG             (0xf)

#define ZPA2326_DEVICE_ID                 (0xb9)

#define ZPA2326_RES_CONF_REG              (0x10)

#define ZPA2326_CTRL_REG0_REG             (0x20)

#define ZPA2326_CTRL_REG0_ONE_SHOT        BIT(0)

#define ZPA2326_CTRL_REG0_ENABLE          BIT(1)

#define ZPA2326_CTRL_REG1_REG             (0x21)

#define ZPA2326_CTRL_REG1_MASK_DATA_READY BIT(2)

#define ZPA2326_CTRL_REG2_REG             (0x22)

#define ZPA2326_CTRL_REG2_SWRESET         BIT(2)

#define ZPA2326_CTRL_REG3_REG             (0x23)

#define ZPA2326_CTRL_REG3_ODR_SHIFT       (4)

#define ZPA2326_CTRL_REG3_ENABLE_MEAS     BIT(7)

#define ZPA2326_INT_SOURCE_REG            (0x24)

#define ZPA2326_INT_SOURCE_DATA_READY     BIT(2)

#define ZPA2326_THS_P_LOW_REG             (0x25)

#define ZPA2326_THS_P_HIGH_REG            (0x26)

#define ZPA2326_STATUS_REG                (0x27)

#define ZPA2326_STATUS_P_DA               BIT(1)

#define ZPA2326_STATUS_FIFO_E             BIT(2)

#define ZPA2326_STATUS_P_OR               BIT(5)

#define ZPA2326_PRESS_OUT_XL_REG          (0x28)

#define ZPA2326_PRESS_OUT_L_REG           (0x29)

#define ZPA2326_PRESS_OUT_H_REG           (0x2a)

#define ZPA2326_TEMP_OUT_L_REG            (0x2b)

#define ZPA2326_TEMP_OUT_H_REG            (0x2c)

struct device;
struct regmap;

bool zpa2326_isreg_writeable(struct device *dev, unsigned int reg);
bool zpa2326_isreg_readable(struct device *dev, unsigned int reg);
bool zpa2326_isreg_precious(struct device *dev, unsigned int reg);

/**
 * zpa2326_probe() - Instantiate and register core ZPA2326 IIO device
 * @parent: Hardware sampling device the created IIO device will be a child of.
 * @name:   Arbitrary name to identify the device.
 * @irq:    Interrupt line, negative if none.
 * @hwid:   Expected device hardware id.
 * @regmap: Registers map used to abstract underlying bus accesses.
 *
 * Return: Zero when successful, a negative error code otherwise.
 */
int zpa2326_probe(struct device        *parent,
		  const char           *name,
		  int                   irq,
		  unsigned int          hwid,
		  struct regmap        *regmap);

/**
 * zpa2326_remove() - Unregister and destroy core ZPA2326 IIO device.
 * @parent: Hardware sampling device the IIO device to remove is a child of.
 */
void zpa2326_remove(const struct device *parent);

#ifdef CONFIG_PM
#include <linux/pm.h>
extern const struct dev_pm_ops zpa2326_pm_ops;

#define ZPA2326_PM_OPS (&zpa2326_pm_ops)
#else

#define ZPA2326_PM_OPS (NULL)
#endif

#endif

Overall Contributors
PersonTokensPropCommitsCommitProp
Grégor Boirie233100.00%1100.00%


Total233100.00%1100.00%


Directory: drivers/iio/pressure



Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.