Release 4.11 drivers/input/keyboard/mpr121_touchkey.c
/*
* Touchkey driver for Freescale MPR121 Controllor
*
* Copyright (C) 2011 Freescale Semiconductor, Inc.
* Author: Zhang Jiejing <jiejing.zhang@freescale.com>
*
* Based on mcs_touchkey.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
/* Register definitions */
#define ELE_TOUCH_STATUS_0_ADDR 0x0
#define ELE_TOUCH_STATUS_1_ADDR 0X1
#define MHD_RISING_ADDR 0x2b
#define NHD_RISING_ADDR 0x2c
#define NCL_RISING_ADDR 0x2d
#define FDL_RISING_ADDR 0x2e
#define MHD_FALLING_ADDR 0x2f
#define NHD_FALLING_ADDR 0x30
#define NCL_FALLING_ADDR 0x31
#define FDL_FALLING_ADDR 0x32
#define ELE0_TOUCH_THRESHOLD_ADDR 0x41
#define ELE0_RELEASE_THRESHOLD_ADDR 0x42
#define AFE_CONF_ADDR 0x5c
#define FILTER_CONF_ADDR 0x5d
/*
* ELECTRODE_CONF_ADDR: This register configures the number of
* enabled capacitance sensing inputs and its run/suspend mode.
*/
#define ELECTRODE_CONF_ADDR 0x5e
#define ELECTRODE_CONF_QUICK_CHARGE 0x80
#define AUTO_CONFIG_CTRL_ADDR 0x7b
#define AUTO_CONFIG_USL_ADDR 0x7d
#define AUTO_CONFIG_LSL_ADDR 0x7e
#define AUTO_CONFIG_TL_ADDR 0x7f
/* Threshold of touch/release trigger */
#define TOUCH_THRESHOLD 0x08
#define RELEASE_THRESHOLD 0x05
/* Masks for touch and release triggers */
#define TOUCH_STATUS_MASK 0xfff
/* MPR121 has 12 keys */
#define MPR121_MAX_KEY_COUNT 12
struct mpr121_touchkey {
struct i2c_client *client;
struct input_dev *input_dev;
unsigned int statusbits;
unsigned int keycount;
u32 keycodes[MPR121_MAX_KEY_COUNT];
};
struct mpr121_init_register {
int addr;
u8 val;
};
static const struct mpr121_init_register init_reg_table[] = {
{ MHD_RISING_ADDR, 0x1 },
{ NHD_RISING_ADDR, 0x1 },
{ MHD_FALLING_ADDR, 0x1 },
{ NHD_FALLING_ADDR, 0x1 },
{ NCL_FALLING_ADDR, 0xff },
{ FDL_FALLING_ADDR, 0x02 },
{ FILTER_CONF_ADDR, 0x04 },
{ AFE_CONF_ADDR, 0x0b },
{ AUTO_CONFIG_CTRL_ADDR, 0x0b },
};
static void mpr121_vdd_supply_disable(void *data)
{
struct regulator *vdd_supply = data;
regulator_disable(vdd_supply);
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Akinobu Mita | 22 | 100.00% | 1 | 100.00% |
Total | 22 | 100.00% | 1 | 100.00% |
static struct regulator *mpr121_vdd_supply_init(struct device *dev)
{
struct regulator *vdd_supply;
int err;
vdd_supply = devm_regulator_get(dev, "vdd");
if (IS_ERR(vdd_supply)) {
dev_err(dev, "failed to get vdd regulator: %ld\n",
PTR_ERR(vdd_supply));
return vdd_supply;
}
err = regulator_enable(vdd_supply);
if (err) {
dev_err(dev, "failed to enable vdd regulator: %d\n", err);
return ERR_PTR(err);
}
err = devm_add_action(dev, mpr121_vdd_supply_disable, vdd_supply);
if (err) {
regulator_disable(vdd_supply);
dev_err(dev, "failed to add disable regulator action: %d\n",
err);
return ERR_PTR(err);
}
return vdd_supply;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Akinobu Mita | 122 | 100.00% | 1 | 100.00% |
Total | 122 | 100.00% | 1 | 100.00% |
static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
{
struct mpr121_touchkey *mpr121 = dev_id;
struct i2c_client *client = mpr121->client;
struct input_dev *input = mpr121->input_dev;
unsigned long bit_changed;
unsigned int key_num;
int reg;
reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
if (reg < 0) {
dev_err(&client->dev, "i2c read error [%d]\n", reg);
goto out;
}
reg <<= 8;
reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR);
if (reg < 0) {
dev_err(&client->dev, "i2c read error [%d]\n", reg);
goto out;
}
reg &= TOUCH_STATUS_MASK;
/* use old press bit to figure out which bit changed */
bit_changed = reg ^ mpr121->statusbits;
mpr121->statusbits = reg;
for_each_set_bit(key_num, &bit_changed, mpr121->keycount) {
unsigned int key_val, pressed;
pressed = reg & BIT(key_num);
key_val = mpr121->keycodes[key_num];
input_event(input, EV_MSC, MSC_SCAN, key_num);
input_report_key(input, key_val, pressed);
dev_dbg(&client->dev, "key %d %d %s\n", key_num, key_val,
pressed ? "pressed" : "released");
}
input_sync(input);
out:
return IRQ_HANDLED;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Jiejing Zhang | 185 | 84.09% | 1 | 50.00% |
Akinobu Mita | 35 | 15.91% | 1 | 50.00% |
Total | 220 | 100.00% | 2 | 100.00% |
static int mpr121_phys_init(struct mpr121_touchkey *mpr121,
struct i2c_client *client, int vdd_uv)
{
const struct mpr121_init_register *reg;
unsigned char usl, lsl, tl, eleconf;
int i, t, vdd, ret;
/* Set up touch/release threshold for ele0-ele11 */
for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) {
t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2);
ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD);
if (ret < 0)
goto err_i2c_write;
ret = i2c_smbus_write_byte_data(client, t + 1,
RELEASE_THRESHOLD);
if (ret < 0)
goto err_i2c_write;
}
/* Set up init register */
for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) {
reg = &init_reg_table[i];
ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val);
if (ret < 0)
goto err_i2c_write;
}
/*
* Capacitance on sensing input varies and needs to be compensated.
* The internal MPR121-auto-configuration can do this if it's
* registers are set properly (based on vdd_uv).
*/
vdd = vdd_uv / 1000;
usl = ((vdd - 700) * 256) / vdd;
lsl = (usl * 65) / 100;
tl = (usl * 90) / 100;
ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl);
ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl);
ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl);
/*
* Quick charge bit will let the capacitive charge to ready
* state quickly, or the buttons may not function after system
* boot.
*/
eleconf = mpr121->keycount | ELECTRODE_CONF_QUICK_CHARGE;
ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
eleconf);
if (ret != 0)
goto err_i2c_write;
dev_dbg(&client->dev, "set up with %x keys.\n", mpr121->keycount);
return 0;
err_i2c_write:
dev_err(&client->dev, "i2c write error: %d\n", ret);
return ret;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Jiejing Zhang | 296 | 98.67% | 2 | 66.67% |
Akinobu Mita | 4 | 1.33% | 1 | 33.33% |
Total | 300 | 100.00% | 3 | 100.00% |
static int mpr_touchkey_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct regulator *vdd_supply;
int vdd_uv;
struct mpr121_touchkey *mpr121;
struct input_dev *input_dev;
int error;
int i;
if (!client->irq) {
dev_err(dev, "irq number should not be zero\n");
return -EINVAL;
}
vdd_supply = mpr121_vdd_supply_init(dev);
if (IS_ERR(vdd_supply))
return PTR_ERR(vdd_supply);
vdd_uv = regulator_get_voltage(vdd_supply);
mpr121 = devm_kzalloc(dev, sizeof(*mpr121), GFP_KERNEL);
if (!mpr121)
return -ENOMEM;
input_dev = devm_input_allocate_device(dev);
if (!input_dev)
return -ENOMEM;
mpr121->client = client;
mpr121->input_dev = input_dev;
mpr121->keycount = device_property_read_u32_array(dev, "linux,keycodes",
NULL, 0);
if (mpr121->keycount > MPR121_MAX_KEY_COUNT) {
dev_err(dev, "too many keys defined (%d)\n", mpr121->keycount);
return -EINVAL;
}
error = device_property_read_u32_array(dev, "linux,keycodes",
mpr121->keycodes,
mpr121->keycount);
if (error) {
dev_err(dev,
"failed to read linux,keycode property: %d\n", error);
return error;
}
input_dev->name = "Freescale MPR121 Touchkey";
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = dev;
if (device_property_read_bool(dev, "autorepeat"))
__set_bit(EV_REP, input_dev->evbit);
input_set_capability(input_dev, EV_MSC, MSC_SCAN);
input_dev->keycode = mpr121->keycodes;
input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
input_dev->keycodemax = mpr121->keycount;
for (i = 0; i < mpr121->keycount; i++)
input_set_capability(input_dev, EV_KEY, mpr121->keycodes[i]);
error = mpr121_phys_init(mpr121, client, vdd_uv);
if (error) {
dev_err(dev, "Failed to init register\n");
return error;
}
error = devm_request_threaded_irq(dev, client->irq, NULL,
mpr_touchkey_interrupt,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev->driver->name, mpr121);
if (error) {
dev_err(dev, "Failed to register interrupt\n");
return error;
}
error = input_register_device(input_dev);
if (error)
return error;
i2c_set_clientdata(client, mpr121);
device_init_wakeup(dev,
device_property_read_bool(dev, "wakeup-source"));
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Jiejing Zhang | 275 | 62.64% | 1 | 14.29% |
Akinobu Mita | 129 | 29.38% | 2 | 28.57% |
Pramod Gurav | 31 | 7.06% | 1 | 14.29% |
Lars-Peter Clausen | 2 | 0.46% | 1 | 14.29% |
Guenter Roeck | 1 | 0.23% | 1 | 14.29% |
Jingoo Han | 1 | 0.23% | 1 | 14.29% |
Total | 439 | 100.00% | 7 | 100.00% |
static int __maybe_unused mpr_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
if (device_may_wakeup(&client->dev))
enable_irq_wake(client->irq);
i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, 0x00);
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Jiejing Zhang | 50 | 98.04% | 1 | 50.00% |
Akinobu Mita | 1 | 1.96% | 1 | 50.00% |
Total | 51 | 100.00% | 2 | 100.00% |
static int __maybe_unused mpr_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
if (device_may_wakeup(&client->dev))
disable_irq_wake(client->irq);
i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
mpr121->keycount);
return 0;
}
Contributors
Person | Tokens | Prop | Commits | CommitProp |
Jiejing Zhang | 62 | 98.41% | 1 | 50.00% |
Akinobu Mita | 1 | 1.59% | 1 | 50.00% |
Total | 63 | 100.00% | 2 | 100.00% |
static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume);
static const struct i2c_device_id mpr121_id[] = {
{ "mpr121_touchkey", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mpr121_id);
#ifdef CONFIG_OF
static const struct of_device_id mpr121_touchkey_dt_match_table[] = {
{ .compatible = "fsl,mpr121-touchkey" },
{ },
};
MODULE_DEVICE_TABLE(of, mpr121_touchkey_dt_match_table);
#endif
static struct i2c_driver mpr_touchkey_driver = {
.driver = {
.name = "mpr121",
.pm = &mpr121_touchkey_pm_ops,
.of_match_table = of_match_ptr(mpr121_touchkey_dt_match_table),
},
.id_table = mpr121_id,
.probe = mpr_touchkey_probe,
};
module_i2c_driver(mpr_touchkey_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>");
MODULE_DESCRIPTION("Touch Key driver for Freescale MPR121 Chip");
Overall Contributors
Person | Tokens | Prop | Commits | CommitProp |
Jiejing Zhang | 1175 | 74.51% | 2 | 18.18% |
Akinobu Mita | 366 | 23.21% | 4 | 36.36% |
Pramod Gurav | 31 | 1.97% | 1 | 9.09% |
Lars-Peter Clausen | 2 | 0.13% | 1 | 9.09% |
Axel Lin | 1 | 0.06% | 1 | 9.09% |
Jingoo Han | 1 | 0.06% | 1 | 9.09% |
Guenter Roeck | 1 | 0.06% | 1 | 9.09% |
Bill Pemberton | | 0.00% | 0 | 0.00% |
Total | 1577 | 100.00% | 11 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.