cregit-Linux how code gets into the kernel

Release 4.11 drivers/input/touchscreen/cyttsp4_spi.c

/*
 * Source for:
 * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
 * For use with Cypress Txx4xx parts.
 * Supported parts include:
 * TMA4XX
 * TMA1036
 *
 * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
 * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
 * Copyright (C) 2013 Cypress Semiconductor
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * version 2, and only version 2, as published by the
 * Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
 *
 */

#include "cyttsp4_core.h"

#include <linux/delay.h>
#include <linux/input.h>
#include <linux/spi/spi.h>


#define CY_SPI_WR_OP		0x00 
/* r/~w */

#define CY_SPI_RD_OP		0x01

#define CY_SPI_BITS_PER_WORD	8

#define CY_SPI_A8_BIT		0x02

#define CY_SPI_WR_HEADER_BYTES	2

#define CY_SPI_RD_HEADER_BYTES	1

#define CY_SPI_CMD_BYTES	2

#define CY_SPI_SYNC_BYTE	0

#define CY_SPI_SYNC_ACK		0x62 
/* from TRM *A protocol */

#define CY_SPI_DATA_SIZE	(2 * 256)


#define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)


static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf, u8 op, u16 reg, u8 *buf, int length) { struct spi_device *spi = to_spi_device(dev); struct spi_message msg; struct spi_transfer xfer[2]; u8 *wr_buf = &xfer_buf[0]; u8 rd_buf[CY_SPI_CMD_BYTES]; int retval; int i; if (length > CY_SPI_DATA_SIZE) { dev_err(dev, "%s: length %d is too big.\n", __func__, length); return -EINVAL; } memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE); memset(rd_buf, 0, CY_SPI_CMD_BYTES); wr_buf[0] = op + (((reg >> 8) & 0x1) ? CY_SPI_A8_BIT : 0); if (op == CY_SPI_WR_OP) { wr_buf[1] = reg & 0xFF; if (length > 0) memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length); } memset(xfer, 0, sizeof(xfer)); spi_message_init(&msg); /* We set both TX and RX buffers because Cypress TTSP requires full duplex operation. */ xfer[0].tx_buf = wr_buf; xfer[0].rx_buf = rd_buf; switch (op) { case CY_SPI_WR_OP: xfer[0].len = length + CY_SPI_CMD_BYTES; spi_message_add_tail(&xfer[0], &msg); break; case CY_SPI_RD_OP: xfer[0].len = CY_SPI_RD_HEADER_BYTES; spi_message_add_tail(&xfer[0], &msg); xfer[1].rx_buf = buf; xfer[1].len = length; spi_message_add_tail(&xfer[1], &msg); break; default: dev_err(dev, "%s: bad operation code=%d\n", __func__, op); return -EINVAL; } retval = spi_sync(spi, &msg); if (retval < 0) { dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n", __func__, retval, xfer[1].len, op); /* * do not return here since was a bad ACK sequence * let the following ACK check handle any errors and * allow silent retries */ } if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK) { dev_dbg(dev, "%s: operation %d failed\n", __func__, op); for (i = 0; i < CY_SPI_CMD_BYTES; i++) dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n", __func__, i, rd_buf[i]); for (i = 0; i < length; i++) dev_dbg(dev, "%s: test buf[%d]:0x%02x\n", __func__, i, buf[i]); return -EIO; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ferruh Yigit436100.00%2100.00%
Total436100.00%2100.00%


static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr, u8 length, void *data) { int rc; rc = cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, NULL, 0); if (rc) return rc; else return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data, length); }

Contributors

PersonTokensPropCommitsCommitProp
Ferruh Yigit69100.00%2100.00%
Total69100.00%2100.00%


static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr, u8 length, const void *data) { return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data, length); }

Contributors

PersonTokensPropCommitsCommitProp
Ferruh Yigit46100.00%2100.00%
Total46100.00%2100.00%

static const struct cyttsp4_bus_ops cyttsp_spi_bus_ops = { .bustype = BUS_SPI, .write = cyttsp_spi_write_block_data, .read = cyttsp_spi_read_block_data, };
static int cyttsp4_spi_probe(struct spi_device *spi) { struct cyttsp4 *ts; int error; /* Set up SPI*/ spi->bits_per_word = CY_SPI_BITS_PER_WORD; spi->mode = SPI_MODE_0; error = spi_setup(spi); if (error < 0) { dev_err(&spi->dev, "%s: SPI setup error %d\n", __func__, error); return error; } ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq, CY_SPI_DATA_BUF_SIZE); return PTR_ERR_OR_ZERO(ts); }

Contributors

PersonTokensPropCommitsCommitProp
Ferruh Yigit8898.88%150.00%
Duan Jiong11.12%150.00%
Total89100.00%2100.00%


static int cyttsp4_spi_remove(struct spi_device *spi) { struct cyttsp4 *ts = spi_get_drvdata(spi); cyttsp4_remove(ts); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Ferruh Yigit29100.00%1100.00%
Total29100.00%1100.00%

static struct spi_driver cyttsp4_spi_driver = { .driver = { .name = CYTTSP4_SPI_NAME, .pm = &cyttsp4_pm_ops, }, .probe = cyttsp4_spi_probe, .remove = cyttsp4_spi_remove, }; module_spi_driver(cyttsp4_spi_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver"); MODULE_AUTHOR("Cypress"); MODULE_ALIAS("spi:cyttsp4");

Overall Contributors

PersonTokensPropCommitsCommitProp
Ferruh Yigit80899.88%266.67%
Duan Jiong10.12%133.33%
Total809100.00%3100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.