cregit-Linux how code gets into the kernel

Release 4.11 drivers/input/touchscreen/fujitsu_ts.c

/*
 * Fujitsu serial touchscreen driver
 *
 * Copyright (c) Dmitry Torokhov <dtor@mail.ru>
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published
 * by the Free Software Foundation.
 */

#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>


#define DRIVER_DESC	"Fujitsu serial touchscreen driver"

MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");


#define FUJITSU_LENGTH 5

/*
 * Per-touchscreen data.
 */

struct fujitsu {
	
struct input_dev *dev;
	
struct serio *serio;
	
int idx;
	
unsigned char data[FUJITSU_LENGTH];
	
char phys[32];
};

/*
 * Decode serial data (5 bytes per packet)
 * First byte
 * 1 C 0 0 R S S S
 * Where C is 1 while in calibration mode (which we don't use)
 * R is 1 when no coordinate corection was done.
 * S are button state
 */

static irqreturn_t fujitsu_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { struct fujitsu *fujitsu = serio_get_drvdata(serio); struct input_dev *dev = fujitsu->dev; if (fujitsu->idx == 0) { /* resync skip until start of frame */ if ((data & 0xf0) != 0x80) return IRQ_HANDLED; } else { /* resync skip garbage */ if (data & 0x80) { fujitsu->idx = 0; return IRQ_HANDLED; } } fujitsu->data[fujitsu->idx++] = data; if (fujitsu->idx == FUJITSU_LENGTH) { input_report_abs(dev, ABS_X, (fujitsu->data[2] << 7) | fujitsu->data[1]); input_report_abs(dev, ABS_Y, (fujitsu->data[4] << 7) | fujitsu->data[3]); input_report_key(dev, BTN_TOUCH, (fujitsu->data[0] & 0x03) != 2); input_sync(dev); fujitsu->idx = 0; } return IRQ_HANDLED; }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Torokhov189100.00%1100.00%
Total189100.00%1100.00%

/* * fujitsu_disconnect() is the opposite of fujitsu_connect() */
static void fujitsu_disconnect(struct serio *serio) { struct fujitsu *fujitsu = serio_get_drvdata(serio); input_get_device(fujitsu->dev); input_unregister_device(fujitsu->dev); serio_close(serio); serio_set_drvdata(serio, NULL); input_put_device(fujitsu->dev); kfree(fujitsu); }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Torokhov59100.00%1100.00%
Total59100.00%1100.00%

/* * fujitsu_connect() is the routine that is called when someone adds a * new serio device that supports the Fujitsu protocol and registers it * as input device. */
static int fujitsu_connect(struct serio *serio, struct serio_driver *drv) { struct fujitsu *fujitsu; struct input_dev *input_dev; int err; fujitsu = kzalloc(sizeof(struct fujitsu), GFP_KERNEL); input_dev = input_allocate_device(); if (!fujitsu || !input_dev) { err = -ENOMEM; goto fail1; } fujitsu->serio = serio; fujitsu->dev = input_dev; snprintf(fujitsu->phys, sizeof(fujitsu->phys), "%s/input0", serio->phys); input_dev->name = "Fujitsu Serial Touchscreen"; input_dev->phys = fujitsu->phys; input_dev->id.bustype = BUS_RS232; input_dev->id.vendor = SERIO_FUJITSU; input_dev->id.product = 0; input_dev->id.version = 0x0100; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(input_dev, ABS_X, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, 4096, 0, 0); serio_set_drvdata(serio, fujitsu); err = serio_open(serio, drv); if (err) goto fail2; err = input_register_device(fujitsu->dev); if (err) goto fail3; return 0; fail3: serio_close(serio); fail2: serio_set_drvdata(serio, NULL); fail1: input_free_device(input_dev); kfree(fujitsu); return err; }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Torokhov27498.56%150.00%
Jiri Slaby41.44%150.00%
Total278100.00%2100.00%

/* * The serio driver structure. */ static struct serio_device_id fujitsu_serio_ids[] = { { .type = SERIO_RS232, .proto = SERIO_FUJITSU, .id = SERIO_ANY, .extra = SERIO_ANY, }, { 0 } }; MODULE_DEVICE_TABLE(serio, fujitsu_serio_ids); static struct serio_driver fujitsu_drv = { .driver = { .name = "fujitsu_ts", }, .description = DRIVER_DESC, .id_table = fujitsu_serio_ids, .interrupt = fujitsu_interrupt, .connect = fujitsu_connect, .disconnect = fujitsu_disconnect, }; module_serio_driver(fujitsu_drv);

Overall Contributors

PersonTokensPropCommitsCommitProp
Dmitry Torokhov68799.13%133.33%
Jiri Slaby40.58%133.33%
Axel Lin20.29%133.33%
Total693100.00%3100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.