cregit-Linux how code gets into the kernel

Release 4.11 drivers/input/touchscreen/mtouch.c

/*
 * MicroTouch (3M) serial touchscreen driver
 *
 * Copyright (c) 2004 Vojtech Pavlik
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 */

/*
 * 2005/02/19 Dan Streetman <ddstreet@ieee.org>
 *   Copied elo.c and edited for MicroTouch protocol
 */

#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>


#define DRIVER_DESC	"MicroTouch serial touchscreen driver"

MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

/*
 * Definitions & global arrays.
 */


#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80

#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40

#define MTOUCH_FORMAT_TABLET_LENGTH 5

#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01

#define MTOUCH_RESPONSE_END_BYTE 0x0d

/* todo: check specs for max length of all responses */

#define MTOUCH_MAX_LENGTH 16


#define MTOUCH_MIN_XC 0

#define MTOUCH_MAX_XC 0x3fff

#define MTOUCH_MIN_YC 0

#define MTOUCH_MAX_YC 0x3fff


#define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1])

#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])

#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])

/*
 * Per-touchscreen data.
 */


struct mtouch {
	
struct input_dev *dev;
	
struct serio *serio;
	
int idx;
	
unsigned char data[MTOUCH_MAX_LENGTH];
	
char phys[32];
};


static void mtouch_process_format_tablet(struct mtouch *mtouch) { struct input_dev *dev = mtouch->dev; if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) { input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data)); input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data)); input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data)); input_sync(dev); mtouch->idx = 0; } }

Contributors

PersonTokensPropCommitsCommitProp
Dan Streetman86100.00%1100.00%
Total86100.00%1100.00%


static void mtouch_process_response(struct mtouch *mtouch) { if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) { /* FIXME - process response */ mtouch->idx = 0; } else if (MTOUCH_MAX_LENGTH == mtouch->idx) { printk(KERN_ERR "mtouch.c: too many response bytes\n"); mtouch->idx = 0; } }

Contributors

PersonTokensPropCommitsCommitProp
Dan Streetman57100.00%1100.00%
Total57100.00%1100.00%


static irqreturn_t mtouch_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { struct mtouch* mtouch = serio_get_drvdata(serio); mtouch->data[mtouch->idx] = data; if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0]) mtouch_process_format_tablet(mtouch); else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0]) mtouch_process_response(mtouch); else printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]); return IRQ_HANDLED; }

Contributors

PersonTokensPropCommitsCommitProp
Dan Streetman90100.00%1100.00%
Total90100.00%1100.00%

/* * mtouch_disconnect() is the opposite of mtouch_connect() */
static void mtouch_disconnect(struct serio *serio) { struct mtouch* mtouch = serio_get_drvdata(serio); input_get_device(mtouch->dev); input_unregister_device(mtouch->dev); serio_close(serio); serio_set_drvdata(serio, NULL); input_put_device(mtouch->dev); kfree(mtouch); }

Contributors

PersonTokensPropCommitsCommitProp
Dan Streetman4576.27%150.00%
Dmitry Torokhov1423.73%150.00%
Total59100.00%2100.00%

/* * mtouch_connect() is the routine that is called when someone adds a * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as * an input device. */
static int mtouch_connect(struct serio *serio, struct serio_driver *drv) { struct mtouch *mtouch; struct input_dev *input_dev; int err; mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL); input_dev = input_allocate_device(); if (!mtouch || !input_dev) { err = -ENOMEM; goto fail1; } mtouch->serio = serio; mtouch->dev = input_dev; snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys); input_dev->name = "MicroTouch Serial TouchScreen"; input_dev->phys = mtouch->phys; input_dev->id.bustype = BUS_RS232; input_dev->id.vendor = SERIO_MICROTOUCH; input_dev->id.product = 0; input_dev->id.version = 0x0100; input_dev->dev.parent = &serio->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0); input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0); serio_set_drvdata(serio, mtouch); err = serio_open(serio, drv); if (err) goto fail2; err = input_register_device(mtouch->dev); if (err) goto fail3; return 0; fail3: serio_close(serio); fail2: serio_set_drvdata(serio, NULL); fail1: input_free_device(input_dev); kfree(mtouch); return err; }

Contributors

PersonTokensPropCommitsCommitProp
Dmitry Torokhov14750.17%466.67%
Dan Streetman14248.46%116.67%
Jiri Slaby41.37%116.67%
Total293100.00%6100.00%

/* * The serio driver structure. */ static struct serio_device_id mtouch_serio_ids[] = { { .type = SERIO_RS232, .proto = SERIO_MICROTOUCH, .id = SERIO_ANY, .extra = SERIO_ANY, }, { 0 } }; MODULE_DEVICE_TABLE(serio, mtouch_serio_ids); static struct serio_driver mtouch_drv = { .driver = { .name = "mtouch", }, .description = DRIVER_DESC, .id_table = mtouch_serio_ids, .interrupt = mtouch_interrupt, .connect = mtouch_connect, .disconnect = mtouch_disconnect, }; module_serio_driver(mtouch_drv);

Overall Contributors

PersonTokensPropCommitsCommitProp
Dan Streetman64379.28%114.29%
Dmitry Torokhov16219.98%457.14%
Jiri Slaby40.49%114.29%
Axel Lin20.25%114.29%
Total811100.00%7100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.