cregit-Linux how code gets into the kernel

Release 4.11 drivers/irqchip/irq-gic-common.c

Directory: drivers/irqchip
/*
 * Copyright (C) 2002 ARM Limited, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqchip/arm-gic.h>

#include "irq-gic-common.h"


static const struct gic_kvm_info *gic_kvm_info;


const struct gic_kvm_info *gic_get_kvm_info(void) { return gic_kvm_info; }

Contributors

PersonTokensPropCommitsCommitProp
Julien Grall13100.00%1100.00%
Total13100.00%1100.00%


void gic_set_kvm_info(const struct gic_kvm_info *info) { BUG_ON(gic_kvm_info != NULL); gic_kvm_info = info; }

Contributors

PersonTokensPropCommitsCommitProp
Julien Grall22100.00%1100.00%
Total22100.00%1100.00%


void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks, void *data) { for (; quirks->desc; quirks++) { if (quirks->iidr != (quirks->mask & iidr)) continue; quirks->init(data); pr_info("GIC: enabling workaround for %s\n", quirks->desc); } }

Contributors

PersonTokensPropCommitsCommitProp
Robert Richter61100.00%1100.00%
Total61100.00%1100.00%


int gic_configure_irq(unsigned int irq, unsigned int type, void __iomem *base, void (*sync_access)(void)) { u32 confmask = 0x2 << ((irq % 16) * 2); u32 confoff = (irq / 16) * 4; u32 val, oldval; int ret = 0; /* * Read current configuration register, and insert the config * for "irq", depending on "type". */ val = oldval = readl_relaxed(base + GIC_DIST_CONFIG + confoff); if (type & IRQ_TYPE_LEVEL_MASK) val &= ~confmask; else if (type & IRQ_TYPE_EDGE_BOTH) val |= confmask; /* If the current configuration is the same, then we are done */ if (val == oldval) return 0; /* * Write back the new configuration, and possibly re-enable * the interrupt. If we fail to write a new configuration for * an SPI then WARN and return an error. If we fail to write the * configuration for a PPI this is most likely because the GIC * does not allow us to set the configuration or we are in a * non-secure mode, and hence it may not be catastrophic. */ writel_relaxed(val, base + GIC_DIST_CONFIG + confoff); if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val) { if (WARN_ON(irq >= 32)) ret = -EINVAL; else pr_warn("GIC: PPI%d is secure or misconfigured\n", irq - 16); } if (sync_access) sync_access(); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Marc Zyngier10360.59%125.00%
Liviu Dudau3520.59%125.00%
Jon Hunter3218.82%250.00%
Total170100.00%4100.00%


void gic_dist_config(void __iomem *base, int gic_irqs, void (*sync_access)(void)) { unsigned int i; /* * Set all global interrupts to be level triggered, active low. */ for (i = 32; i < gic_irqs; i += 16) writel_relaxed(GICD_INT_ACTLOW_LVLTRIG, base + GIC_DIST_CONFIG + i / 4); /* * Set priority on all global interrupts. */ for (i = 32; i < gic_irqs; i += 4) writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i); /* * Deactivate and disable all SPIs. Leave the PPI and SGIs * alone as they are in the redistributor registers on GICv3. */ for (i = 32; i < gic_irqs; i += 32) { writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR + i / 8); writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ENABLE_CLEAR + i / 8); } if (sync_access) sync_access(); }

Contributors

PersonTokensPropCommitsCommitProp
Marc Zyngier12797.69%266.67%
Feng Kan32.31%133.33%
Total130100.00%3100.00%


void gic_cpu_config(void __iomem *base, void (*sync_access)(void)) { int i; /* * Deal with the banked PPI and SGI interrupts - disable all * PPI interrupts, ensure all SGI interrupts are enabled. * Make sure everything is deactivated. */ writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR); writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR); writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET); /* * Set priority on PPI and SGI interrupts */ for (i = 0; i < 32; i += 4) writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i * 4 / 4); if (sync_access) sync_access(); }

Contributors

PersonTokensPropCommitsCommitProp
Marc Zyngier8496.55%266.67%
Feng Kan33.45%133.33%
Total87100.00%3100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
Marc Zyngier33065.22%225.00%
Robert Richter6112.06%112.50%
Julien Grall428.30%112.50%
Liviu Dudau356.92%112.50%
Jon Hunter326.32%225.00%
Feng Kan61.19%112.50%
Total506100.00%8100.00%
Directory: drivers/irqchip
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.