Release 4.11 drivers/media/platform/vsp1/vsp1_rpf.c
/*
* vsp1_rpf.c -- R-Car VSP1 Read Pixel Formatter
*
* Copyright (C) 2013-2014 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/device.h>
#include <media/v4l2-subdev.h>
#include "vsp1.h"
#include "vsp1_dl.h"
#include "vsp1_pipe.h"
#include "vsp1_rwpf.h"
#include "vsp1_video.h"
#define RPF_MAX_WIDTH 8190
#define RPF_MAX_HEIGHT 8190
/* -----------------------------------------------------------------------------
* Device Access
*/
static inline void vsp1_rpf_write(struct vsp1_rwpf *rpf,
struct vsp1_dl_list *dl, u32 reg, u32 data)
{
vsp1_dl_list_write(dl, reg + rpf->entity.index * VI6_RPF_OFFSET, data);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Laurent Pinchart | 40 | 100.00% | 2 | 100.00% |
| Total | 40 | 100.00% | 2 | 100.00% |
/* -----------------------------------------------------------------------------
* V4L2 Subdevice Operations
*/
static const struct v4l2_subdev_ops rpf_ops = {
.pad = &vsp1_rwpf_pad_ops,
};
/* -----------------------------------------------------------------------------
* VSP1 Entity Operations
*/
static void rpf_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_rwpf *rpf = to_rwpf(&entity->subdev);
const struct vsp1_format_info *fmtinfo = rpf->fmtinfo;
const struct v4l2_pix_format_mplane *format = &rpf->format;
const struct v4l2_mbus_framefmt *source_format;
const struct v4l2_mbus_framefmt *sink_format;
unsigned int left = 0;
unsigned int top = 0;
u32 pstride;
u32 infmt;
if (params == VSP1_ENTITY_PARAMS_RUNTIME) {
vsp1_rpf_write(rpf, dl, VI6_RPF_VRTCOL_SET,
rpf->alpha << VI6_RPF_VRTCOL_SET_LAYA_SHIFT);
vsp1_rpf_write(rpf, dl, VI6_RPF_MULT_ALPHA, rpf->mult_alpha |
(rpf->alpha << VI6_RPF_MULT_ALPHA_RATIO_SHIFT));
vsp1_pipeline_propagate_alpha(pipe, dl, rpf->alpha);
return;
}
if (params == VSP1_ENTITY_PARAMS_PARTITION) {
unsigned int offsets[2];
struct v4l2_rect crop;
/*
* Source size and crop offsets.
*
* The crop offsets correspond to the location of the crop
* rectangle top left corner in the plane buffer. Only two
* offsets are needed, as planes 2 and 3 always have identical
* strides.
*/
crop = *vsp1_rwpf_get_crop(rpf, rpf->entity.config);
/*
* Partition Algorithm Control
*
* The partition algorithm can split this frame into multiple
* slices. We must scale our partition window based on the pipe
* configuration to match the destination partition window.
* To achieve this, we adjust our crop to provide a 'sub-crop'
* matching the expected partition window. Only 'left' and
* 'width' need to be adjusted.
*/
if (pipe->partitions > 1) {
const struct v4l2_mbus_framefmt *output;
struct vsp1_entity *wpf = &pipe->output->entity;
unsigned int input_width = crop.width;
/*
* Scale the partition window based on the configuration
* of the pipeline.
*/
output = vsp1_entity_get_pad_format(wpf, wpf->config,
RWPF_PAD_SOURCE);
crop.width = pipe->partition.width * input_width
/ output->width;
crop.left += pipe->partition.left * input_width
/ output->width;
}
vsp1_rpf_write(rpf, dl, VI6_RPF_SRC_BSIZE,
(crop.width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
(crop.height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
vsp1_rpf_write(rpf, dl, VI6_RPF_SRC_ESIZE,
(crop.width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) |
(crop.height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT));
offsets[0] = crop.top * format->plane_fmt[0].bytesperline
+ crop.left * fmtinfo->bpp[0] / 8;
if (format->num_planes > 1)
offsets[1] = crop.top * format->plane_fmt[1].bytesperline
+ crop.left / fmtinfo->hsub
* fmtinfo->bpp[1] / 8;
else
offsets[1] = 0;
vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_Y,
rpf->mem.addr[0] + offsets[0]);
vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C0,
rpf->mem.addr[1] + offsets[1]);
vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_ADDR_C1,
rpf->mem.addr[2] + offsets[1]);
return;
}
/* Stride */
pstride = format->plane_fmt[0].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_Y_SHIFT;
if (format->num_planes > 1)
pstride |= format->plane_fmt[1].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
vsp1_rpf_write(rpf, dl, VI6_RPF_SRCM_PSTRIDE, pstride);
/* Format */
sink_format = vsp1_entity_get_pad_format(&rpf->entity,
rpf->entity.config,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&rpf->entity,
rpf->entity.config,
RWPF_PAD_SOURCE);
infmt = VI6_RPF_INFMT_CIPM
| (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
if (fmtinfo->swap_yc)
infmt |= VI6_RPF_INFMT_SPYCS;
if (fmtinfo->swap_uv)
infmt |= VI6_RPF_INFMT_SPUVS;
if (sink_format->code != source_format->code)
infmt |= VI6_RPF_INFMT_CSC;
vsp1_rpf_write(rpf, dl, VI6_RPF_INFMT, infmt);
vsp1_rpf_write(rpf, dl, VI6_RPF_DSWAP, fmtinfo->swap);
/* Output location */
if (pipe->bru) {
const struct v4l2_rect *compose;
compose = vsp1_entity_get_pad_selection(pipe->bru,
pipe->bru->config,
rpf->bru_input,
V4L2_SEL_TGT_COMPOSE);
left = compose->left;
top = compose->top;
}
vsp1_rpf_write(rpf, dl, VI6_RPF_LOC,
(left << VI6_RPF_LOC_HCOORD_SHIFT) |
(top << VI6_RPF_LOC_VCOORD_SHIFT));
/* On Gen2 use the alpha channel (extended to 8 bits) when available or
* a fixed alpha value set through the V4L2_CID_ALPHA_COMPONENT control
* otherwise.
*
* The Gen3 RPF has extended alpha capability and can both multiply the
* alpha channel by a fixed global alpha value, and multiply the pixel
* components to convert the input to premultiplied alpha.
*
* As alpha premultiplication is available in the BRU for both Gen2 and
* Gen3 we handle it there and use the Gen3 alpha multiplier for global
* alpha multiplication only. This however prevents conversion to
* premultiplied alpha if no BRU is present in the pipeline. If that use
* case turns out to be useful we will revisit the implementation (for
* Gen3 only).
*
* We enable alpha multiplication on Gen3 using the fixed alpha value
* set through the V4L2_CID_ALPHA_COMPONENT control when the input
* contains an alpha channel. On Gen2 the global alpha is ignored in
* that case.
*
* In all cases, disable color keying.
*/
vsp1_rpf_write(rpf, dl, VI6_RPF_ALPH_SEL, VI6_RPF_ALPH_SEL_AEXT_EXT |
(fmtinfo->alpha ? VI6_RPF_ALPH_SEL_ASEL_PACKED
: VI6_RPF_ALPH_SEL_ASEL_FIXED));
if (entity->vsp1->info->gen == 3) {
u32 mult;
if (fmtinfo->alpha) {
/* When the input contains an alpha channel enable the
* alpha multiplier. If the input is premultiplied we
* need to multiply both the alpha channel and the pixel
* components by the global alpha value to keep them
* premultiplied. Otherwise multiply the alpha channel
* only.
*/
bool premultiplied = format->flags
& V4L2_PIX_FMT_FLAG_PREMUL_ALPHA;
mult = VI6_RPF_MULT_ALPHA_A_MMD_RATIO
| (premultiplied ?
VI6_RPF_MULT_ALPHA_P_MMD_RATIO :
VI6_RPF_MULT_ALPHA_P_MMD_NONE);
} else {
/* When the input doesn't contain an alpha channel the
* global alpha value is applied in the unpacking unit,
* the alpha multiplier isn't needed and must be
* disabled.
*/
mult = VI6_RPF_MULT_ALPHA_A_MMD_NONE
| VI6_RPF_MULT_ALPHA_P_MMD_NONE;
}
rpf->mult_alpha = mult;
}
vsp1_rpf_write(rpf, dl, VI6_RPF_MSK_CTRL, 0);
vsp1_rpf_write(rpf, dl, VI6_RPF_CKEY_CTRL, 0);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Laurent Pinchart | 686 | 86.51% | 17 | 85.00% |
| Kieran Bingham | 94 | 11.85% | 1 | 5.00% |
| Takanari Hayama | 10 | 1.26% | 1 | 5.00% |
| Mauro Carvalho Chehab | 3 | 0.38% | 1 | 5.00% |
| Total | 793 | 100.00% | 20 | 100.00% |
static const struct vsp1_entity_operations rpf_entity_ops = {
.configure = rpf_configure,
};
/* -----------------------------------------------------------------------------
* Initialization and Cleanup
*/
struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index)
{
struct vsp1_rwpf *rpf;
char name[6];
int ret;
rpf = devm_kzalloc(vsp1->dev, sizeof(*rpf), GFP_KERNEL);
if (rpf == NULL)
return ERR_PTR(-ENOMEM);
rpf->max_width = RPF_MAX_WIDTH;
rpf->max_height = RPF_MAX_HEIGHT;
rpf->entity.ops = &rpf_entity_ops;
rpf->entity.type = VSP1_ENTITY_RPF;
rpf->entity.index = index;
sprintf(name, "rpf.%u", index);
ret = vsp1_entity_init(vsp1, &rpf->entity, name, 2, &rpf_ops,
MEDIA_ENT_F_PROC_VIDEO_PIXEL_FORMATTER);
if (ret < 0)
return ERR_PTR(ret);
/* Initialize the control handler. */
ret = vsp1_rwpf_init_ctrls(rpf, 0);
if (ret < 0) {
dev_err(vsp1->dev, "rpf%u: failed to initialize controls\n",
index);
goto error;
}
v4l2_ctrl_handler_setup(&rpf->ctrls);
return rpf;
error:
vsp1_entity_destroy(&rpf->entity);
return ERR_PTR(ret);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Laurent Pinchart | 179 | 90.40% | 9 | 90.00% |
| Javier Martinez Canillas | 19 | 9.60% | 1 | 10.00% |
| Total | 198 | 100.00% | 10 | 100.00% |
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Laurent Pinchart | 966 | 88.46% | 28 | 87.50% |
| Kieran Bingham | 94 | 8.61% | 1 | 3.12% |
| Javier Martinez Canillas | 19 | 1.74% | 1 | 3.12% |
| Takanari Hayama | 10 | 0.92% | 1 | 3.12% |
| Mauro Carvalho Chehab | 3 | 0.27% | 1 | 3.12% |
| Total | 1092 | 100.00% | 32 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.