cregit-Linux how code gets into the kernel

Release 4.11 drivers/media/usb/cx231xx/cx231xx-input.c

/*
 *   cx231xx IR glue driver
 *
 *   Copyright (C) 2010 Mauro Carvalho Chehab
 *
 *   Polaris (cx231xx) has its support for IR's with a design close to MCE.
 *   however, a few designs are using an external I2C chip for IR, instead
 *   of using the one provided by the chip.
 *   This driver provides support for those extra devices
 *
 *   This program is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU General Public License as
 *   published by the Free Software Foundation version 2.
 *
 *   This program is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   General Public License for more details.
 */

#include "cx231xx.h"
#include <linux/slab.h>
#include <linux/bitrev.h>


#define MODULE_NAME "cx231xx-input"


static int get_key_isdbt(struct IR_i2c *ir, enum rc_type *protocol, u32 *pscancode, u8 *toggle) { int rc; u8 cmd, scancode; dev_dbg(&ir->rc->input_dev->dev, "%s\n", __func__); /* poll IR chip */ rc = i2c_master_recv(ir->c, &cmd, 1); if (rc < 0) return rc; if (rc != 1) return -EIO; /* it seems that 0xFE indicates that a button is still hold down, while 0xff indicates that no button is hold down. 0xfe sequences are sometimes interrupted by 0xFF */ if (cmd == 0xff) return 0; scancode = bitrev8(cmd); dev_dbg(&ir->rc->input_dev->dev, "cmd %02x, scan = %02x\n", cmd, scancode); *protocol = RC_TYPE_OTHER; *pscancode = scancode; *toggle = 0; return 1; }

Contributors

PersonTokensPropCommitsCommitProp
Mauro Carvalho Chehab11685.93%480.00%
David Härdeman1914.07%120.00%
Total135100.00%5100.00%


int cx231xx_ir_init(struct cx231xx *dev) { struct i2c_board_info info; u8 ir_i2c_bus; dev_dbg(dev->dev, "%s\n", __func__); /* Only initialize if a rc keycode map is defined */ if (!cx231xx_boards[dev->model].rc_map_name) return -ENODEV; request_module("ir-kbd-i2c"); memset(&info, 0, sizeof(struct i2c_board_info)); memset(&dev->init_data, 0, sizeof(dev->init_data)); dev->init_data.rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE); if (!dev->init_data.rc_dev) return -ENOMEM; dev->init_data.name = cx231xx_boards[dev->model].name; strlcpy(info.type, "ir_video", I2C_NAME_SIZE); info.platform_data = &dev->init_data; /* * Board-dependent values * * For now, there's just one type of hardware design using * an i2c device. */ dev->init_data.get_key = get_key_isdbt; dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name; /* The i2c micro-controller only outputs the cmd part of NEC protocol */ dev->init_data.rc_dev->scancode_mask = 0xff; dev->init_data.rc_dev->driver_name = "cx231xx"; dev->init_data.type = RC_BIT_NEC; info.addr = 0x30; /* Load and bind ir-kbd-i2c */ ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master; dev_dbg(dev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n", ir_i2c_bus, info.addr); dev->ir_i2c_client = i2c_new_device( cx231xx_get_i2c_adap(dev, ir_i2c_bus), &info); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Mauro Carvalho Chehab23796.34%450.00%
Matthias Schwarzott41.63%112.50%
Andi Shyti31.22%112.50%
David Härdeman20.81%225.00%
Total246100.00%8100.00%


void cx231xx_ir_exit(struct cx231xx *dev) { if (dev->ir_i2c_client) i2c_unregister_device(dev->ir_i2c_client); dev->ir_i2c_client = NULL; }

Contributors

PersonTokensPropCommitsCommitProp
Mauro Carvalho Chehab29100.00%2100.00%
Total29100.00%2100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
Mauro Carvalho Chehab39392.69%758.33%
David Härdeman245.66%325.00%
Matthias Schwarzott40.94%18.33%
Andi Shyti30.71%18.33%
Total424100.00%12100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.