cregit-Linux how code gets into the kernel

Release 4.11 drivers/media/usb/dvb-usb-v2/af9035.h

/*
 * Afatech AF9035 DVB USB driver
 *
 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi>
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; either version 2 of the License, or
 *    (at your option) any later version.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *    GNU General Public License for more details.
 *
 *    You should have received a copy of the GNU General Public License along
 *    with this program; if not, write to the Free Software Foundation, Inc.,
 *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */

#ifndef AF9035_H

#define AF9035_H

#include <linux/platform_device.h>
#include "dvb_usb.h"
#include "af9033.h"
#include "tua9001.h"
#include "fc0011.h"
#include "fc0012.h"
#include "mxl5007t.h"
#include "tda18218.h"
#include "fc2580.h"
#include "it913x.h"
#include "si2168.h"
#include "si2157.h"


struct reg_val {
	
u32 reg;
	
u8  val;
};


struct reg_val_mask {
	
u32 reg;
	
u8  val;
	
u8  mask;
};


struct usb_req {
	
u8  cmd;
	
u8  mbox;
	
u8  wlen;
	
u8  *wbuf;
	
u8  rlen;
	
u8  *rbuf;
};


struct state {

#define BUF_LEN 64
	
u8 buf[BUF_LEN];
	
u8 seq; /* packet sequence number */
	
u8 prechip_version;
	
u8 chip_version;
	
u16 chip_type;
	
u8 eeprom[256];
	
bool no_eeprom;
	
u8 ir_mode;
	
u8 ir_type;
	
u8 dual_mode:1;
	
u8 no_read:1;
	
u8 af9033_i2c_addr[2];
	
struct af9033_config af9033_config[2];
	
struct af9033_ops ops;
	
#define AF9035_I2C_CLIENT_MAX 4
	
struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX];
	
struct i2c_adapter *i2c_adapter_demod;
	
struct platform_device *platform_device_tuner[2];
};


static const u32 clock_lut_af9035[] = {
	20480000, /*      FPGA */
	16384000, /* 16.38 MHz */
	20480000, /* 20.48 MHz */
	36000000, /* 36.00 MHz */
	30000000, /* 30.00 MHz */
	26000000, /* 26.00 MHz */
	28000000, /* 28.00 MHz */
	32000000, /* 32.00 MHz */
	34000000, /* 34.00 MHz */
	24000000, /* 24.00 MHz */
	22000000, /* 22.00 MHz */
	12000000, /* 12.00 MHz */
};


static const u32 clock_lut_it9135[] = {
	12000000, /* 12.00 MHz */
	20480000, /* 20.48 MHz */
	36000000, /* 36.00 MHz */
	30000000, /* 30.00 MHz */
	26000000, /* 26.00 MHz */
	28000000, /* 28.00 MHz */
	32000000, /* 32.00 MHz */
	34000000, /* 34.00 MHz */
	24000000, /* 24.00 MHz */
	22000000, /* 22.00 MHz */
};


#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw"

#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"

#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"

#define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw"

/*
 * eeprom is memory mapped as read only. Writing that memory mapped address
 * will not corrupt eeprom.
 *
 * TS mode:
 * 0  TS
 * 1  DCA + PIP
 * 3  PIP
 * 5  DCA + PIP (AF9035 only)
 * n  DCA
 *
 * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
 */


#define EEPROM_BASE_AF9035        0x42f5

#define EEPROM_BASE_IT9135        0x4994

#define EEPROM_SHIFT                0x10


#define EEPROM_IR_MODE              0x18

#define EEPROM_TS_MODE              0x31

#define EEPROM_2ND_DEMOD_ADDR       0x32

#define EEPROM_IR_TYPE              0x34

#define EEPROM_1_IF_L               0x38

#define EEPROM_1_IF_H               0x39

#define EEPROM_1_TUNER_ID           0x3c

#define EEPROM_2_IF_L               0x48

#define EEPROM_2_IF_H               0x49

#define EEPROM_2_TUNER_ID           0x4c

/* USB commands */

#define CMD_MEM_RD                  0x00

#define CMD_MEM_WR                  0x01

#define CMD_I2C_RD                  0x02

#define CMD_I2C_WR                  0x03

#define CMD_IR_GET                  0x18

#define CMD_FW_DL                   0x21

#define CMD_FW_QUERYINFO            0x22

#define CMD_FW_BOOT                 0x23

#define CMD_FW_DL_BEGIN             0x24

#define CMD_FW_DL_END               0x25

#define CMD_FW_SCATTER_WR           0x29

#define CMD_GENERIC_I2C_RD          0x2a

#define CMD_GENERIC_I2C_WR          0x2b

#endif

Overall Contributors

PersonTokensPropCommitsCommitProp
Antti Palosaari35489.39%2275.86%
Olli Salonen235.81%13.45%
Alessandro Radicati51.26%13.45%
Hans-Frieder Vogt41.01%13.45%
Mauro Carvalho Chehab41.01%13.45%
Oliver Schinagl30.76%13.45%
Jose Alberto Reguero20.51%13.45%
Stefan Pöschel10.25%13.45%
Total396100.00%29100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.