Release 4.11 drivers/media/usb/dvb-usb-v2/anysee.h
/*
* DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
*
* Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* TODO:
* - add smart card reader support for Conditional Access (CA)
*
* Card reader in Anysee is nothing more than ISO 7816 card reader.
* There is no hardware CAM in any Anysee device sold.
* In my understanding it should be implemented by making own module
* for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
* module registers serial interface that can be used to communicate
* with any ISO 7816 smart card.
*
* Any help according to implement serial smart card reader support
* is highly welcome!
*/
#ifndef _DVB_USB_ANYSEE_H_
#define _DVB_USB_ANYSEE_H_
#define DVB_USB_LOG_PREFIX "anysee"
#include "dvb_usb.h"
#include "dvb_ca_en50221.h"
enum cmd {
CMD_I2C_READ = 0x33,
CMD_I2C_WRITE = 0x31,
CMD_REG_READ = 0xb0,
CMD_REG_WRITE = 0xb1,
CMD_STREAMING_CTRL = 0x12,
CMD_LED_AND_IR_CTRL = 0x16,
CMD_GET_IR_CODE = 0x41,
CMD_GET_HW_INFO = 0x19,
CMD_SMARTCARD = 0x34,
CMD_CI = 0x37,
};
struct anysee_state {
u8 buf[64];
u8 seq;
u8 hw; /* PCB ID */
#define ANYSEE_I2C_CLIENT_MAX 1
struct i2c_client *i2c_client[ANYSEE_I2C_CLIENT_MAX];
u8 fe_id:1; /* frondend ID */
u8 has_ci:1;
u8 has_tda18212:1;
u8 ci_attached:1;
struct dvb_ca_en50221 ci;
unsigned long ci_cam_ready; /* jiffies */
};
#define ANYSEE_HW_507T 2
/* E30 */
#define ANYSEE_HW_507CD 6
/* E30 Plus */
#define ANYSEE_HW_507DC 10
/* E30 C Plus */
#define ANYSEE_HW_507SI 11
/* E30 S2 Plus */
#define ANYSEE_HW_507FA 15
/* E30 Combo Plus / E30 C Plus */
#define ANYSEE_HW_508TC 18
/* E7 TC */
#define ANYSEE_HW_508S2 19
/* E7 S2 */
#define ANYSEE_HW_508T2C 20
/* E7 T2C */
#define ANYSEE_HW_508PTC 21
/* E7 PTC Plus */
#define ANYSEE_HW_508PS2 22
/* E7 PS2 Plus */
#define REG_IOA 0x80
/* Port A (bit addressable) */
#define REG_IOB 0x90
/* Port B (bit addressable) */
#define REG_IOC 0xa0
/* Port C (bit addressable) */
#define REG_IOD 0xb0
/* Port D (bit addressable) */
#define REG_IOE 0xb1
/* Port E (NOT bit addressable) */
#define REG_OEA 0xb2
/* Port A Output Enable */
#define REG_OEB 0xb3
/* Port B Output Enable */
#define REG_OEC 0xb4
/* Port C Output Enable */
#define REG_OED 0xb5
/* Port D Output Enable */
#define REG_OEE 0xb6
/* Port E Output Enable */
#endif
/***************************************************************************
* USB API description (reverse engineered)
***************************************************************************
Transaction flow:
=================
BULK[00001] >>> REQUEST PACKET 64 bytes
BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
General reply packet(s) are always used if not own reply defined.
============================================================================
| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
============================================================================
| 00 | reply data (if any) from previous transaction
| | Just same reply packet as returned during previous transaction.
| | Needed only if reply is missed in previous transaction.
| | Just skip normally.
----------------------------------------------------------------------------
| 01-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
============================================================================
| 00 | reply data (if any)
----------------------------------------------------------------------------
| 01-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | I2C WRITE REQUEST PACKET
============================================================================
| 00 | 0x31 I2C write command
----------------------------------------------------------------------------
| 01 | i2c address
----------------------------------------------------------------------------
| 02 | data length
| | 0x02 (for typical I2C reg / val pair)
----------------------------------------------------------------------------
| 03 | 0x01
----------------------------------------------------------------------------
| 04- | data
----------------------------------------------------------------------------
| -59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | I2C READ REQUEST PACKET
============================================================================
| 00 | 0x33 I2C read command
----------------------------------------------------------------------------
| 01 | i2c address + 1
----------------------------------------------------------------------------
| 02 | register
----------------------------------------------------------------------------
| 03 | 0x00
----------------------------------------------------------------------------
| 04 | 0x00
----------------------------------------------------------------------------
| 05 | data length
----------------------------------------------------------------------------
| 06-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
============================================================================
| 00 | 0xb1 register write command
----------------------------------------------------------------------------
| 01-02 | register
----------------------------------------------------------------------------
| 03 | 0x01
----------------------------------------------------------------------------
| 04 | value
----------------------------------------------------------------------------
| 05-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
============================================================================
| 00 | 0xb0 register read command
----------------------------------------------------------------------------
| 01-02 | register
----------------------------------------------------------------------------
| 03 | 0x01
----------------------------------------------------------------------------
| 04-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | LED CONTROL REQUEST PACKET
============================================================================
| 00 | 0x16 LED and IR control command
----------------------------------------------------------------------------
| 01 | 0x01 (LED)
----------------------------------------------------------------------------
| 03 | 0x00 blink
| | 0x01 lights continuously
----------------------------------------------------------------------------
| 04 | blink interval
| | 0x00 fastest (looks like LED lights continuously)
| | 0xff slowest
----------------------------------------------------------------------------
| 05-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | IR CONTROL REQUEST PACKET
============================================================================
| 00 | 0x16 LED and IR control command
----------------------------------------------------------------------------
| 01 | 0x02 (IR)
----------------------------------------------------------------------------
| 03 | 0x00 IR disabled
| | 0x01 IR enabled
----------------------------------------------------------------------------
| 04-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | STREAMING CONTROL REQUEST PACKET
============================================================================
| 00 | 0x12 streaming control command
----------------------------------------------------------------------------
| 01 | 0x00 streaming disabled
| | 0x01 streaming enabled
----------------------------------------------------------------------------
| 02 | 0x00
----------------------------------------------------------------------------
| 03-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | REMOTE CONTROL REQUEST PACKET
============================================================================
| 00 | 0x41 remote control command
----------------------------------------------------------------------------
| 01-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | REMOTE CONTROL REPLY PACKET
============================================================================
| 00 | 0x00 code not received
| | 0x01 code received
----------------------------------------------------------------------------
| 01 | remote control code
----------------------------------------------------------------------------
| 02-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | GET HARDWARE INFO REQUEST PACKET
============================================================================
| 00 | 0x19 get hardware info command
----------------------------------------------------------------------------
| 01-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | GET HARDWARE INFO REPLY PACKET
============================================================================
| 00 | hardware id
----------------------------------------------------------------------------
| 01-02 | firmware version
----------------------------------------------------------------------------
| 03-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
============================================================================
| 00-63 | SMART CARD READER PACKET
============================================================================
| 00 | 0x34 smart card reader command
----------------------------------------------------------------------------
| xx |
----------------------------------------------------------------------------
| xx-59 | don't care
----------------------------------------------------------------------------
| 60 | packet sequence number
----------------------------------------------------------------------------
| 61-63 | don't care
----------------------------------------------------------------------------
*/
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| Antti Palosaari | 223 | 99.55% | 15 | 93.75% |
| Sakari Ailus | 1 | 0.45% | 1 | 6.25% |
| Total | 224 | 100.00% | 16 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.